Bobcat T450 Track Loader Specifications

The Bobcat T450 compact track loader driveline system components: Kubota V2203 diesel engine with a rated power of 49 hp (36.4 kW) or Bobcat D24 diesel engine with a rated power of 62 hp (46.2 kW), and 1-speed or 2-speed transmission. The hydraulic system has a pump with a rated flow of 16.7 gpm (63.2 lpm). The system pressure is 3350 psi (231 bar). The Bobcat T450 is equipped with a radial-lift loader boom, solid-mounted undercarriage with 3 rollers, and rubber tracks. The loader has a boom lift force of 3450 lbs (1564 kg) and bucket breakout force of 3588 lbs (1627 kg). The rated operating capacity is 1400 lbs (635 kg), and tipping load is 4000 lbs (1814 kg).

Kubota Engine Specs

Engine Model ...................... Kubota V2203 M-DI-E2B
Engine Type ...................... Vertical water-cooled 4-cylinder diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 134.1 (2.2)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 3.64 (92.4)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 49.0 (36.4)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 150 (112)
Torque Speed, rpm ...................... 1700
Idle Speed, rpm ...................... 1075-3000
Compression Ratio ...................... 22.6:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication with filter
Combustion Chamber ...................... Spherical type (E-TVCS)
Fuel Tank Capacity, gal (L) ...................... 14.5 (54.5)
Oil Capacity, qts (L) ...................... 9.2 (8.7)
Coolant Capacity, qts (L) ...................... 11.2 (10.6)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Bobcat Doosan Engine Specs

Engine Model ...................... Bobcat Doosan D24
Engine Type ...................... Vertical four-cylinder direct injection liquid-cooled diesel
Number of Cylinders ...................... 4
Displacement, cu.in (L) ...................... 146.5 (2.39)
Cylinder Bore, in (mm) ...................... 3.54 (90.0)
Piston Stroke, in (mm) ...................... 3.70 (94.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 62.0 (46.2)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 225 (166)
Torque Speed, rpm ...................... 1800
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... High-pressure common rail
Injection Pump ...................... Delphi DFP 4.4
Fuel Filter Type ...................... Full flow, cartridge
Lubricating System ...................... Pressure lubrication by gear pump
Oil Filter Type ...................... Full flow, cartridge
Fuel Tank Capacity, gal (L) ...................... 17.3 (65.5)
Oil Capacity, qts (L) ...................... 9.2 (8.7)
Coolant Capacity, qts (L) ...................... 12.0 (11.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... Fully hydrostatic, rubber track drive
Transmission ...................... Tandem piston pumps and reversing motors
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low/high)
Brakes Type ...................... Independent wet disc
Drive Motor Oil Capacity, qts (L) ...................... 0.42 (0.40)
Travel Speed (Single), mph (km/h) ...................... 7.3 (11.7)
Travel Speed (Low Range), mph (km/h) ...................... 7.3 (11.7)
Travel Speed (High Range), mph (km/h) ...................... 11.0 (17.7)

Undercarriage

Undercarriage Type ...................... Solid-mounted
Tracks Type ...................... Rubber tracks, C-Pattern
Tracks Tension ...................... Grease cylinder and spring
Track Width, in (mm) ...................... 11.8 (300)
Ground Pressure, psi (Bar) ...................... 4.7 (0.324)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 16.7 (63.2)
System Pressure, psi (Bar) ...................... 3350 (231)
Number of Valves ...................... 3
Hydraulic Cylinders ...................... Double-acting
Lift Cylinder Rod Diameter, in (mm) ...................... 1.25 (31.8)
Lift Cylinder Piston Diameter, in (mm) ...................... 2 (50.8)
Lift Cylinder Piston Stroke, in (mm) ...................... 26.2 (665)
Bucket Cylinder Rod Diameter, in (mm) ...................... 1.25 (31.8)
Bucket Cylinder Piston Diameter, in (mm) ...................... 2.38 (60.4)
Bucket Cylinder Piston Stroke, in (mm) ...................... 14.1 (357)
Hydraulic Reservoir Capacity, gal (L) ...................... 1.4 (5.3)
Hydraulic System Capacity, gal (L) ...................... 5.5 (21.0)

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 1400 (635)
Tipping Load, lbs (kg) ...................... 4000 (1814)
Boom Lifting, lbs (kg) ...................... 3450 (1564)
Bucket Breakout Force, lbs (kg) ...................... 3588 (1627)
Loader Boom Type ...................... Radial-lift

Dimensions and Weight

Length (w/o Bucket), in (mm) ...................... 98.4 (2500)
Length (Bucket On Ground), in (mm) ...................... 126.6 (3215)
Length (Ground Contact), in (mm) ...................... 50.2 (1275)
Width (w/o Bucket), in (mm) ...................... 55 (1395)
Operating Height, in (mm) ...................... 141.9 (3605)
Height (Operator Cab), in (mm) ...................... 77.8 (1975)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109.5 (2780)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 83.8 (2130)
Dump Reach At Max Height, in (mm) ...................... 23.5 (595)
Rollback Angle At Ground Level, deg ...................... 28
Rollback Angle At Max Height, deg ...................... 91
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 56 (1420)
Ground Clearance, in (mm) ...................... 8.5 (215)
Turning Radius (w/Bucket), in (mm) ...................... 77.9 (1980)
Shipping Weight, lbs (kg) ...................... 5590 (2540)
Operating Weight, lbs (kg) ...................... 6150 (2790)