Case 445 Skid Steer Specifications

The Case 445 skid steer loader driveline system components: a 274 cu.in (4.5L) Case 445/M2 four-cylinder direct injection diesel engine with a rated power of 80.5 hp (60 kW) and 2-speed hydrostatic transmission. The open center hydraulic system has a pump with a rated capacity of 21 gal/min (80 l/min). The system relief pressure is 3050 psi (210 bar). The Case 445 is equipped with a planetary single reduction, 100HV continuous roller chains, and 12x16.5 tires. The skid steer loader has a max lift height of 120.6" (3060 mm) to hinge pin and dump height of 92.3" (2340 mm). The rated operating capacity is 2500 lbs (1135 kg), and tipping load is 5000 lbs (2270 kg).

Engine Specs

Engine Model .................. Case 445/M2
Engine Type .................. 4-Stroke direct injection liquid-cooled diesel
Number of Cylinders .................. 4
Displacement, cu in (L) .................. 274 (4.50)
Engine Bore, in (mm) .................. 4.1 (104.0)
Engine Stroke, in (mm) .................. 5.2 (132.0)
Aspiration .................. Naturally aspirated
Rated Engine Power, hp (kW) .................. 80.5 (60.0)
Rated Engine Speed, rpm .................. 2300
Maximum Torque, Nm (ft-lb) .................. 320 (236)
Torque Speed, rpm .................. 1400
High Idle Speed, rpm .................. 2500
Low Idle Speed, rpm .................. 1050
Firing Order .................. 1-3-4-2
Fuel System .................. Injection pump
Fuel Filter Type.................... In-line strainer
Governor Type .................. Mechanical
Lubricating System .................. Positive pressure
Oil Filter Type.................... Full-flow cartridge
Cooling System .................. Pressurized
Water Pump Type .................. Integral
Air Cleaner Type .................. Dry element
Fuel Tank Capacity, gal (L) .................. 17.3 (65.5)
Oil Capacity, qts (L) .................. 12.7 (12.0)
Coolant Capacity, qts (L) .................. 18.0 (17.0)
Electrical System Rating, Volts .................. 12
Charging System .................. Alternator
Alternator Rating, Amps .................. 95

Drive Train

Drive System Type .................. Hydrostatic, 4 wheel drive
Number of Gears .................. 2 (Low/High)
Drive Pump Type .................. Tandem, axial piston
Chain Drive Type .................. ASA 100HV continuous roller chain
Brakes Type .................. Independent wet disc
Final Drive Type .................. Single reduction planetary to chain drive
Tire Size (Std) .................. 12x16.5
Tire Size (Opt) .................. 33-15.5x16.5
Chain Case Oil Capacity (per side), qts (L) .................. 8.0 (7.6)
Forward Speed (Low), mph (kph) .................. 7.0 (11.2)
Forward Speed (High), mph (kph) .................. 11.7 (18.8)
Reverse Speed (Low), mph (kph) .................. 7.0 (11.2)
Reverse Speed (High), mph (kph) .................. 11.7 (18.8)

Hydraulic System

Hydraulic System Type .................. Open center
Hydraulic Pump Type .................. Gear
Pump Flow (Std), gpm (Lpm) .................. 21.0 (80.0)
Pump Flow (Opt), gpm (Lpm) .................. 33.7 (128.0)
System Pressure, Bar (psi) .................. 210 (3050)
Hydraulic Reservoir Capacity, gal (L) .................. 5.7 (21.5)
Hydraulic System Capacity, gal (L) .................. 11.0 (41.5)
Number of Valves .................. 3

Loader Performance

Rated Operating Capacity, lbs (kg) .................. 2500 (1135)
Tipping Load, lbs (kg) .................. 5000 (2270)
Boom Lifting Force, lbs (kg) .................. 5065 (2300)
Bucket Breakout Force, lbs (kg) .................. 6350 (2885)
Loader Boom Type .................. Vertical-lift

Dimensions and Weight

Wheelbase, in (mm) .................. 44.9 (1140)
Height (Operator Cab), in (mm) .................. 80 (2030)
Height (Boom Raised), in (mm) .................. 158 (4010)
Length (w/o Bucket), in (mm) .................. 103.1 (2620)
Length (Bucket On Ground), in (mm) .................. 135.5 (3440)
Width (w/o Bucket), in (mm) .................. 60 (1520)
Height to Hinge Pin (Fully Raised), in (mm) .................. 120.6 (3060)
Dump Angle At Max Height, deg .................. 40
Dump Height (Fully Raised), in (mm) .................. 92.3 (2340)
Dump Reach At Max Height, in (mm) .................. 33.7 (860)
Rollback Angle At Ground Level, deg .................. 27
Rollback Angle At Max Height, deg .................. 95
Departure Angle, deg .................. 31
Bucket Width, in (mm) .................. 82 (2080)
Ground Clearance, in (mm) .................. 9 (230)
Turning Radius (w/Bucket), in (mm) .................. 85.8 (2180)
Shipping Weight, lbs (kg) .................. 6950 (3160)
Operating Weight, lbs (kg) .................. 7675 (3480)