Bobcat T110 Track Loader Specifications

The Bobcat T110 compact track loader is powered by 148.5 cu.in (2.4L) Kubota V2403 4-cylinder direct injection diesel engine with a rated power of 39 hp (29 kW) at 2200 rpm. The Bobcat T110 is equipped with a single-speed or two-speed hydrostatic transmission, radial-lift loader boom, solid-mounted undercarriage, and 9.9" (250 mm) rubber tracks. The hydraulic system has a pump with fluid flow rate of 12.5 gpm (47.5 lpm). The hydraulic pressure is 3000 psi (207 bar). The track loader has a rated operating capacity of 1100 lbs (498 kg) and tipping load of 3181 lbs (1443 kg). The lift height is 103.7" (2635 mm) to hinge pin, and dump height is 78.7" (2000 mm).

Engine Specs

Engine Model ...................... Kubota V2403-M-DI-E3B
Engine Type ...................... 4-cycle vertical direct injection diesel
Number of Cylinders ...................... 4
Total Displacement, cu in (L) ...................... 148.5 (2.43)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 4.03 (102.4)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 39.0 (29.0)
Rated Engine Speed, rpm ...................... 2200
Low Idle Speed, rpm ...................... 1220
High Idle Speed, rpm ...................... 2450
Maximum Torque, Nm (lb-ft) ...................... 150 (111)
Torque Speed, rpm ...................... 1400
Compression Ratio ...................... 23.8:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Common rail direct injection
Fuel System Control ...................... Electronic
Lubricating system ...................... Forced lubrication by pump
Cooling system ...................... Forced circulation with water pump
Emission Level ...................... Interim Tier 4
Fuel Tank Capacity, gal (L) ...................... 11.9 (45.2)
Oil Capacity, qts (L) ...................... 6.7 (6.3)
Coolant Capacity, qts (L) ...................... 11.6 (11.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... Fully hydrostatic, rubber track drive
Transmission ...................... Tandem piston pumps and reversing motors
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low-high)
Brakes Type ...................... Independent wet disc
Travel Speed (Single), mph (km/h) ...................... 5.2 (8.4)
Travel Speed (Low Range), mph (km/h) ...................... 5.2 (8.4)
Travel Speed (High Range), mph (km/h) ...................... 8.4 (13.5)

Undercarriage

Undercarriage Type ...................... Solid-Mounted
Tracks Type ...................... Rubber tracks, C-Pattern
Tracks Tension ...................... Grease cylinder and spring
Track Width, in (mm) ...................... 9.9 (250)
Ground Pressure (Standard Controls), psi (Bar) ...................... 4.6 (0.317)
Ground Pressure (Joystick Controls), psi (Bar) ...................... 4.8 (0.331)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 12.5 (47.5)
System Pressure, Bar (psi) ...................... 207 (3000)
Number of Valves ...................... 3
Hydraulic Cylinders ...................... Double-acting
Lift Cylinder Rod Diameter, in (mm) ...................... 1.25 (31.8)
Lift Cylinder Piston Diameter, in (mm) ...................... 2 (50.8)
Lift Cylinder Piston Stroke, in (mm) ...................... 25.7 (654)
Bucket Cylinder Rod Diameter, in (mm) ...................... 1.25 (31.8)
Bucket Cylinder Piston Diameter, in (mm) ...................... 2.25 (57.2)
Bucket Cylinder Piston Stroke, in (mm) ...................... 11.9 (302)
Hydraulic Reservoir Capacity, gal (L) ...................... 3.4 (13.0)
Hydraulic System Capacity, gal (L) ...................... 6.3 (24.0)

Loader Performance

Rated Operating Capacity (Standard Controls), lbs (kg) ...................... 1100 (498)
Rated Operating Capacity (Joystick Controls), lbs (kg) ...................... 1100 (498)
Tipping Load (Standard Controls), lbs (kg) ...................... 3181 (1443)
Tipping Load (Joystick Controls), lbs (kg) ...................... 3422 (1552)
Boom Lifting Force (Standard Controls), lbs (kg) ...................... 2473 (1122)
Boom Lifting Force (Joystick Controls), lbs (kg) ...................... 3035 (1373)
Bucket Breakout Force (Standard Controls), lbs (kg) ...................... 2360 (1071)
Bucket Breakout Force (Joystick Controls), lbs (kg) ...................... 2226 (1010)
Loader Boom Type ...................... Radial-lift

Dimensions and Weight

Length (w/o Bucket), in (mm) ...................... 89.1 (2265)
Length (Bucket On Ground), in (mm) ...................... 117 (2970)
Length (Ground Contact), in (mm) ...................... 51.1 (1300)
Width (w/o Bucket), in (mm) ...................... 47.2 (1200)
Operating Height, in (mm) ...................... 136.8 (3475)
Height (Operator Cab), in (mm) ...................... 74.1 (1880)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 103.7 (2635)
Dump Angle At Max Height, deg ...................... 41
Dump Height (Fully Raised), in (mm) ...................... 78.7 (2000)
Dump Reach At Max Height, in (mm) ...................... 22.8 (580)
Rollback Angle At Ground Level, deg ...................... 28
Rollback Angle At Max Height, deg ...................... 95
Departure Angle, deg ...................... 37
Bucket Width, in (mm) ...................... 50 (1270)
Ground Clearance, in (mm) ...................... 6.2 (160)
Turning Radius (w/Bucket), in (mm) ...................... 72.9 (1850)
Operating Weight (Standard Controls), lbs (kg) ...................... 5245 (2380)
Operating Weight (Joystick Controls), lbs (kg) ...................... 5445 (2470)