Bobcat T180 Track Loader Specifications

The Bobcat T180 compact track loader driveline system components: Kubota V2403 diesel engine with a rated power of 61 hp (45.5 kW) or Kubota V2607 diesel engine with a rated power of 66 hp (49.2 kW), and single-speed hydrostatic transmission. The hydraulic system has a pump with a rated flow of 16.9 gpm (64 lpm). The system pressure is 3350 psi (231 bar). The Bobcat T180 is equipped with a radial-lift loader boom, solid-mounted undercarriage, and rubber tracks. The loader has a max lift height of 114.5" (2910 mm) to hinge pin and dump height of 86.5" (2195 mm). The rated operating capacity is 1800 lbs (816 kg), and tipping load is 5331 lbs (2418 kg).

Kubota V2403 Engine Specs

Engine Model ...................... Kubota V2403-M-DI-T
Engine Type ...................... 4-cycle vertical direct injection diesel
Number of Cylinders ...................... 4
Total Displacement, cu in (L) ...................... 148.5 (2.43)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 4.03 (102.4)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 61.0 (45.5)
Rated Engine Speed, rpm ...................... 2700
Low Idle Speed, rpm ...................... 1220
High Idle Speed, rpm ...................... 2900
Maximum Torque, Nm (lb-ft) ...................... 211 (156)
Torque Speed, rpm ...................... 1475
Compression Ratio ...................... 23.8:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Common rail direct injection
Fuel System Control ...................... Electronic
Lubricating system ...................... Forced lubrication by pump
Cooling system ...................... Forced circulation with water pump
Emission Level ...................... Interim Tier 4
Fuel Tank Capacity, gal (L) ...................... 28.0 (106.0)
Oil Capacity, qts (L) ...................... 9.5 (9.0)
Coolant Capacity, qts (L) ...................... 11.0 (10.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Kubota V2607 Engine Specs

Engine Model ...................... Kubota V2607-DI-TE-3B
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 158.7 (2.59)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 66.0 (49.2)
Rated Engine Speed, rpm ...................... 2700
Maximum Torque, Nm (lb-ft) ...................... 218 (161)
Torque Speed, rpm ...................... 1425
Idle Speed, rpm ...................... 1175-2900
Compression Ratio ...................... 19:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication by gear pump
Cooling system ...................... Forced circulation with water pump
Air Cleaner Type ...................... Cartridge, dry element
Fuel Tank Capacity, gal (L) ...................... 28.0 (106.1)
Oil Capacity, qts (L) ...................... 9.5 (9.0)
Coolant Capacity, qts (L) ...................... 11.0 (10.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... Fully hydrostatic, rubber track drive
Transmission ...................... Tandem piston pumps and reversing motors
Number of Gears ...................... Single
Brakes Type ...................... Independent wet disc
Drive Motor Oil Capacity, qts (L) ...................... 0.25 (0.24)
Forward Speed, mph (km/h) ...................... 7.1 (11.4)
Reverse Speed, mph (km/h) ...................... 7.1 (11.4)

Undercarriage

Undercarriage Type ...................... Solid-Mounted
Tracks Type ...................... Rubber tracks, C-Pattern
Tracks Tension ...................... Grease cylinder and spring
Track Width (Std), in (mm) ...................... 12.6 (320)
Track Width (Opt), in (mm) ...................... 15.7 (400)
Ground Pressure (12.6" Tracks), psi (Bar) ...................... 4.8 (0.331)
Ground Pressure (15.7" Tracks), psi (Bar) ...................... 4.0 (0.259)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 16.9 (64.0)
Pump Capacity (High Flow), gpm (Lpm) ...................... 26.4 (100.0)
System Pressure, Bar (psi) ...................... 231 (3350)
Number of Valves ...................... 3
Hydraulic Cylinders ...................... Double-acting
Lift Cylinder Rod Diameter, in (mm) ...................... 1.5 (38.1)
Lift Cylinder Piston Diameter, in (mm) ...................... 2.25 (57.1)
Lift Cylinder Piston Stroke, in (mm) ...................... 27.9 (709)
Bucket Cylinder Rod Diameter, in (mm) ...................... 1.38 (34.9)
Bucket Cylinder Piston Diameter, in (mm) ...................... 2.75 (69.8)
Bucket Cylinder Piston Stroke, in (mm) ...................... 13.2 (335)
Hydraulic Reservoir Capacity, gal (L) ...................... 4.8 (18.2)
Hydraulic System Capacity, gal (L) ...................... 8.5 (32.1)

Loader Performance

Rated Operating Capacity (35% tipping load), lbs (kg) ...................... 1800 (816)
Rated Operating Capacity (50% tipping load), lbs (kg) ...................... 2665 (1209)
Tipping Load, lbs (kg) ...................... 5331 (2418)
Boom Lifting Force, lbs (kg) ...................... 4500 (2041)
Bucket Breakout Force, lbs (kg) ...................... 4300 (1950)
Loader Boom Type ...................... Radial-lift

Dimensions and Weight

Length (w/o Bucket), in (mm) ...................... 101.9 (2590)
Length (Bucket On Ground), in (mm) ...................... 130.3 (3310)
Length (Ground Contact), in (mm) ...................... 48.4 (1230)
Width (12.6" Tracks, w/o Bucket), in (mm) ...................... 66 (1675)
Width (15.7" Tracks, w/o Bucket), in (mm) ...................... 73.9 (1875)
Operating Height, in (mm) ...................... 148 (3760)
Height (Operator Cab), in (mm) ...................... 76.3 (1940)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 114.5 (2910)
Dump Angle At Max Height, deg ...................... 44
Dump Height (Fully Raised), in (mm) ...................... 86.5 (2195)
Dump Reach At Max Height, in (mm) ...................... 19.1" (485)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 92
Departure Angle, deg ...................... 30
Bucket Width (Std), in (mm) ...................... 68 (1725)
Bucket Width (Opt), in (mm) ...................... 74 (1880)
Ground Clearance, in (mm) ...................... 8.1 (205)
Turning Radius (with 68" Bucket), in (mm) ...................... 78.8 (2000)
Turning Radius (with 74" Bucket), in (mm) ...................... 80.2 (2035)
Operating Weight (12.6" Tracks), lbs (kg) ...................... 7625 (3455)
Operating Weight (15.7" Tracks), lbs (kg) ...................... 7690 (3490)