Specs, Service, and Problems of Skid Steers and Track Loaders

________________________________________________________________________________

Compact Track Loaders / Bobcat Compact Track Loaders / Bobcat T190

Bobcat T190 Track Loader Specifications

The Bobcat T190 compact track loader is powered by Kubota V2403 diesel engine with a rated power of 61 hp (45.5 kW) or Kubota V2607 diesel engine with a rated power of 66 hp (49.2 kW). The Bobcat T190 is equipped with 1-speed hydrostatic transmission, vertical-lift loader boom, solid-mounted undercarriage, and 12.6" or 15.7" rubber tracks. The hydraulic system has a pump with fluid flow rate of 16.3 gpm (61.6 lpm). The hydraulic pressure is 3350 psi (231 bar). The loader has a rated operating capacity of 1900 lbs (862 kg) and tipping load of 6852 lbs (3108 kg). The boom lifting force is 4700 lbs (2132 kg), and bucket breakout force is 4450 lbs (2018 kg).

Kubota V2403 Engine Specs

Engine Model ...................... Kubota V2403-M-DI-TE-2B
Engine Type ...................... 4-cycle vertical direct injection diesel
Number of Cylinders ...................... 4
Total Displacement, cu in (L) ...................... 148.5 (2.43)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 4.03 (102.4)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 61.0 (45.5)
Rated Engine Speed, rpm ...................... 2700
Low Idle Speed, rpm ...................... 1075-1225
High Idle Speed, rpm ...................... 2760-2900
Maximum Torque, Nm (lb-ft) ...................... 235 (174)
Torque Speed, rpm ...................... 1475
Compression Ratio ...................... 23.8:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Common rail direct injection
Fuel System Control ...................... Electronic
Lubricating system ...................... Forced lubrication by pump
Cooling system ...................... Forced circulation with water pump
Emission Level ...................... Interim Tier 4
Fuel Tank Capacity, gal (L) ...................... 28.0 (106.0)
Oil Capacity, qts (L) ...................... 9.5 (9.0)
Coolant Capacity, qts (L) ...................... 11.0 (10.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Kubota V2607 Engine Specs

Engine Model ...................... Kubota V2607-DI-TE-3B
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 158.7 (2.59)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 66.0 (49.2)
Rated Engine Speed, rpm ...................... 2700
Maximum Torque, Nm (lb-ft) ...................... 218 (161)
Torque Speed, rpm ...................... 1425
Idle Speed, rpm ...................... 1175-2900
Compression Ratio ...................... 19:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication by gear pump
Cooling system ...................... Forced circulation with water pump
Air Cleaner Type ...................... Cartridge, dry element
Fuel Tank Capacity, gal (L) ...................... 28.0 (106.0)
Oil Capacity, qts (L) ...................... 9.5 (9.0)
Coolant Capacity, qts (L) ...................... 11.0 (10.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... Fully hydrostatic, rubber track drive
Transmission ...................... Tandem piston pumps and reversing motors
Number of Gears ...................... Single
Brakes Type ...................... Independent wet disc
Drive Motor Oil Capacity, qts (L) ...................... 0.25 (0.24)
Forward Speed, mph (km/h) ...................... 7.1 (11.4)
Reverse Speed, mph (km/h) ...................... 7.1 (11.4)

Undercarriage

Undercarriage Type ...................... Solid-Mounted
Tracks Type ...................... Rubber tracks, C-Pattern
Tracks Tension ...................... Grease cylinder and spring
Track Width (Std), in (mm) ...................... 12.6 (320)
Track Width (Opt), in (mm) ...................... 15.7 (400)
Ground Pressure (12.6" Tracks), psi (Bar) ...................... 4.9 (0.338)
Ground Pressure (15.7" Tracks), psi (Bar) ...................... 4.1 (0.283)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 16.3 (61.6)
Pump Capacity (High Flow), gpm (Lpm) ...................... 25.5 (96.4)
System Pressure, Bar (psi) ...................... 231 (3350)
Number of Valves ...................... 3
Hydraulic Cylinders ...................... Double-acting
Lift Cylinder Rod Diameter, in (mm) ...................... 1.5 (38.1)
Lift Cylinder Piston Diameter, in (mm) ...................... 2.5 (63.5)
Lift Cylinder Piston Stroke, in (mm) ...................... 23.7 (602)
Bucket Cylinder Rod Diameter, in (mm) ...................... 1.38 (34.9)
Bucket Cylinder Piston Diameter, in (mm) ...................... 2.75 (69.8)
Bucket Cylinder Piston Stroke, in (mm) ...................... 13.2 (335)
Hydraulic Reservoir Capacity, gal (L) ...................... 4.8 (18.2)
Hydraulic System Capacity, gal (L) ...................... 9.0 (34.1)

Loader Performance

Rated Operating Capacity (35% tipping load), lbs (kg) ...................... 1900 (862)
Rated Operating Capacity (50% tipping load), lbs (kg) ...................... 3426 (1554)
Tipping Load, lbs (kg) ...................... 6852 (3108)
Boom Lifting Force, lbs (kg) ...................... 4700 (2132)
Bucket Breakout Force, lbs (kg) ...................... 4450 (2018)
Loader Boom Type ...................... Vertical-lift

Dimensions and Weight

Length (w/o Bucket), in (mm) ...................... 101.9 (2590)
Length (Bucket On Ground), in (mm) ...................... 130.3 (3310)
Length (Ground Contact), in (mm) ...................... 55.2 (1400)
Width (12.6" Tracks, w/o Bucket), in (mm) ...................... 66 (1675)
Width (15.7" Tracks, w/o Bucket), in (mm) ...................... 73.9 (1875)
Operating Height, in (mm) ...................... 152.1 (3860)
Height (Operator Cab), in (mm) ...................... 76.3 (1940)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 118.2 (3000)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 91 (2310)
Dump Reach At Max Height, in (mm) ...................... 30.9" (785)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 95
Departure Angle, deg ...................... 30
Bucket Width (Std), in (mm) ...................... 68 (1725)
Bucket Width (Opt), in (mm) ...................... 74 (1880)
Ground Clearance, in (mm) ...................... 8.1 (205)
Turning Radius (with 68" Bucket), in (mm) ...................... 78.8 (2000)
Turning Radius (with 74" Bucket), in (mm) ...................... 80.2 (2035)
Shipping Weight, lbs (kg) ...................... 6790 (3080)
Operating Weight (12.6" Tracks, Std Flow), lbs (kg) ...................... 7610 (3450)
Operating Weight (12.6" Tracks, High Flow), lbs (kg) ...................... 7665 (3475)
Operating Weight (15.7" Tracks, Std Flow), lbs (kg) ...................... 7930 (3600)
Operating Weight (15.7" Tracks, High Flow), lbs (kg) ...................... 7985 (3625)

________________________________________________________________________________

________________________________________________________________________________________

BOBCAT SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

GEHL SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

CASE SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________