Bobcat T300 Track Loader Specifications

The Bobcat T300 compact track loader driveline system components: a 202.5 cu.in (3.3L) Kubota V3300-DI-T 4-cylinder turbocharged liquid-cooled diesel engine with a rated power of 80.8 hp (60.3 kW), and one-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 18.7 gal/min (70.8 l/min). The system pressure is 3300 psi (227.5 bar). The Bobcat T300 is equipped with hydraulic disc brakes and rubber tracks with steel inserts. The compact track loader has a boom lifting force of 6100 lbs (2770 kg) and bucket breakout force of 6000 lbs (2725 kg). The rated operating capacity is 3000 lbs (1360 kg), and tipping load is 8570 lbs (3890 kg).

Engine Specs

Engine Model ...................... Kubota V3300-DI-T
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 202.5 (3.32)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 80.8 (60.3)
Rated Engine Speed, rpm ...................... 2400
Maximum Torque, Nm (lb-ft) ...................... 295 (217.6)
Torque Speed, rpm ...................... 1400
Idle Speed, rpm ...................... 1125-2575
Compression Ratio ...................... 19.3:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication by gear pump
Fuel Tank Capacity, gal (L) ...................... 30.0 (113.6)
Oil Capacity, qts (L) ...................... 14.0 (13.2)
Coolant Capacity, qts (L) ...................... 17.2 (16.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... Fully hydrostatic, rubber track drive
Transmission ...................... Tandem piston pumps and reversing motors
Brakes Type ...................... Independent wet disc
Drive Motor Oil Capacity, qts (L) ...................... 0.11 (0.10)
Forward Speed, mph (kph) ...................... 6.6 (10.6)
Reverse Speed, mph (kph) ...................... 6.6 (10.6)

Undercarriage

Tracks Type ...................... Rubber with steel inserts
Track Width, in (mm) ...................... 17.7 (450)
Track Rollers (per Side) ...................... 3 triple-flanged rollers
Track Idlers (per Side) ...................... Front and rear idlers

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ...................... 18.7 (70.8)
Pump Flow (Opt), gpm (Lpm) ...................... 29.2 (110.7)
System Pressure, Bar (psi) ...................... 227.5 (3300)
Hydraulic Reservoir Capacity, qts (L) ...................... 18.9 (17.8)
Hydraulic System Capacity, gal (L) ...................... 13.0 (49.2)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 3000 (1360)
Tipping Load, lbs (kg) ...................... 8570 (3890)
Boom Lifting Force, lbs (kg) ...................... 6100 (2770)
Bucket Breakout Force, lbs (kg) ...................... 6000 (2725)

Dimensions and Weight

Length (w/o Bucket), in (mm) ...................... 114.5 (2910)
Length (Bucket On Ground), in (mm) ...................... 142.9 (3630)
Length (Ground Contact), in (mm) ...................... 63.7 (1615)
Width (w/o Bucket), in (mm) ...................... 78 (1980)
Operating Height, in (mm) ...................... 160.5 (4075)
Height (Operator Cab), in (mm) ...................... 80.9 (2055)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 126.4 (3210)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 99.4 (2520)
Dump Reach At Max Height, in (mm) ...................... 34 (865)
Rollback Angle At Ground Level, deg ...................... 30
Rollback Angle At Max Height, deg ...................... 96
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 80 (2030)
Ground Clearance, in (mm) ...................... 9.6 (245)
Turning Radius (w/Bucket), in (mm) ...................... 84.2 (2140)
Shipping Weight, lbs (kg) ...................... 8710 (3960)
Operating Weight, lbs (kg) ...................... 9680 (4400)