Bobcat T630 Track Loader Specifications

The Bobcat T630 compact track loader driveline system components: a 203.2 cu.in (3.3L) Kubota V3307 4-cylinder turbocharged diesel engine with a rated power of 74.3 hp (55.4 kW), and single-speed or two-speed transmission. The hydraulic system has a pump with a rated flow of 23 gpm (87.1 lpm). The system pressure is 3550 psi (245 bar). The Bobcat T630 is equipped with a radial-lift loader boom, solid-mounted or roller suspension undercarriage, and rubber tracks. The loader has a boom lift force of 6200 lbs (2812 kg) and bucket breakout force of 6250 lbs (2835 kg). The rated operating capacity is 2230 lbs (1012 kg), and tipping load is 6371 lbs (2890 kg).

Engine Specs

Engine Model ...................... Kubota V3307-DI-TE3
Engine Type ...................... Vertical liquid-cooled 4-cylinder diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 203.2 (3.3)
Cylinder Bore, in (mm) ...................... 3.70 (94.0)
Piston Stroke, in (mm) ...................... 4.72 (120.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 74.3 (55.4)
Rated Engine Speed, rpm ...................... 2400
Maximum Torque, Nm (lb-ft) ...................... 264 (195)
Torque Speed, rpm ...................... 1600
Low Idle Speed, rpm ...................... 1250-1450
High Idle Speed, rpm ...................... 2525-2650
Compression Ratio ...................... 20:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication by gear pump
Cooling system ...................... Forced circulation with water pump
Air Cleaner Type ...................... Cartridge, dry element
Fuel Tank Capacity, gal (L) ...................... 27.2 (103.1)
Oil Capacity, qts (L) ...................... 12.0 (11.4)
Coolant Capacity, qts (L) ...................... 12.4 (11.7)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... Fully hydrostatic, rubber track drive
Transmission ...................... Tandem piston pumps and reversing motors
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low-high)
Brakes Type ...................... Independent wet disc
Drive Motor Oil Capacity, qts (L) ...................... 0.22 (0.21)
Travel Speed (Single), mph (km/h) ...................... 6.6 (10.6)
Travel Speed (Low Range), mph (km/h) ...................... 6.1 (9.8)
Travel Speed (High Range), mph (km/h) ...................... 10.7 (17.2)

Undercarriage

Undercarriage Type (Std) ...................... Solid-Mounted
Undercarriage Type (Opt) ...................... Roller Suspension
Tracks Type ...................... Rubber tracks, C-Pattern
Tracks Tension ...................... Grease cylinder and spring
Track Width (Std), in (mm) ...................... 12.6 (320)
Track Width (Opt), in (mm) ...................... 17.7 (450)
Ground Pressure (12.6" Tracks, Roller Suspension), psi (Bar) ...................... 5.8 (0.401)
Ground Pressure (17.7" Tracks, Roller Suspension), psi (Bar) ...................... 4.2 (0.291)
Ground Pressure (12.6" Tracks, Solid-Mounted), psi (Bar) ...................... 5.5 (0.379)
Ground Pressure (17.7" Tracks, Solid-Mounted), psi (Bar) ...................... 4.0 (0.276)
Number of Rollers (per Side) ...................... 4, Triple flange rollers

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 23.0 (87.1)
Pump Capacity (High Flow), gpm (Lpm) ...................... 30.5 (115.5)
System Pressure, Bar (psi) ...................... 245 (3550)
Number of Valves ...................... 3
Hydraulic Cylinders ...................... Double-acting
Lift Cylinder Rod Diameter, in (mm) ...................... 2.5 (63.5)
Lift Cylinder Piston Diameter, in (mm) ...................... 2.25 (57.2)
Lift Cylinder Piston Stroke, in (mm) ...................... 33.9 (860)
Bucket Cylinder Rod Diameter, in (mm) ...................... 1.63 (41.4)
Bucket Cylinder Piston Diameter, in (mm) ...................... 3 (76.2)
Bucket Cylinder Piston Stroke, in (mm) ...................... 14 (355)
Hydraulic Reservoir Capacity, gal (L) ...................... 2.7 (10.2)
Hydraulic System Capacity, gal (L) ...................... 11.0 (41.6)

Loader Performance

Rated Operating Capacity (Roller Suspension Undercarriage), lbs (kg) ...................... 1980 (898)
Rated Operating Capacity (Solid-Mounted Undercarriage), lbs (kg) ...................... 2230 (1012)
Tipping Load (Roller Suspension Undercarriage), lbs (kg) ...................... 5657 (2566)
Tipping Load (Solid-Mounted Undercarriage), lbs (kg) ...................... 6371 (2890)
Boom Lifting Force (Roller Suspension Undercarriage), lbs (kg) ...................... 6200 (2812)
Boom Lifting Force (Solid-Mounted Undercarriage), lbs (kg) ...................... 6200 (2812)
Bucket Breakout Force (Roller Suspension Undercarriage), lbs (kg) ...................... 6000 (2722)
Bucket Breakout Force (Solid-Mounted Undercarriage), lbs (kg) ...................... 6250 (2835)
Loader Boom Type ...................... Radial-lift

Dimensions and Weight

Length (w/o Bucket), in (mm) ...................... 108.4 (2750)
Length (Bucket On Ground), in (mm) ...................... 136.8 (3475)
Length (Ground Contact), in (mm) ...................... 59 (1500)
Width (w/o Bucket), in (mm) ...................... 72.9 (1850)
Operating Height, in (mm) ...................... 155.5 (3950)
Height (Operator Cab), in (mm) ...................... 81.3 (2065)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 121 (3075)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 93.2 (2365)
Dump Reach At Max Height, in (mm) ...................... 24.1 (615)
Rollback Angle At Ground Level, deg ...................... 31
Rollback Angle At Max Height, deg ...................... 97
Departure Angle, deg ...................... 31
Bucket Width, in (mm) ...................... 74 (1880)
Ground Clearance, in (mm) ...................... 9.2 (233)
Turning Radius (w/Bucket), in (mm) ...................... 88.1 (2240)
Operating Weight (Roller Suspension Undercarriage), lbs (kg) ...................... 9650 (4375)
Operating Weight (Solid-Mounted Undercarriage), lbs (kg) ...................... 9015 (4090)