Bobcat T650 Track Loader Specifications

The Bobcat T650 compact track loader is powered by 203.2 cu.in (3.3L) Kubota V3307-DI-TE3 4-cylinder direct injection turbocharged diesel engine with a rated power of 70.3 hp (52.4 kW) at 2400 rpm. The Bobcat T650 is equipped with 1-speed or 2-speed hydrostatic transmission, hydraulic disc brakes, and rubber tracks with steel inserts. The hydraulic system has a pump with fluid flow rate of 23.5 gpm (87.1 lpm). The hydraulic pressure is 3550 psi (245 bar). The compact track loader has a rated operating capacity of 2490 lbs (1130 kg) and tipping load of 7120 lbs (3230 kg). The lift height is 124" (3150 mm) to hinge pin, and dump height is 96.3" (2445 mm).

Engine Specs

Engine Model ...................... Kubota V3307-DI-TE3
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 203.2 (3.3)
Cylinder Bore, in (mm) ...................... 3.70 (94.0)
Piston Stroke, in (mm) ...................... 4.72 (120.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 70.3 (52.4)
Rated Engine Speed, rpm ...................... 2400
Maximum Torque, Nm (lb-ft) ...................... 253 (186.5)
Torque Speed, rpm ...................... 1600
Idle Speed, rpm ...................... 1250-2650
Compression Ratio ...................... 20:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication by gear pump
Fuel Tank Capacity, gal (L) ...................... 44.0 (167.0)
Oil Capacity, qts (L) ...................... 12.0 (11.4)
Coolant Capacity, qts (L) ...................... 12.4 (11.7)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... Fully hydrostatic, rubber track drive
Transmission ...................... Tandem piston pumps and reversing motors
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low/high)
Brakes Type ...................... Independent wet disc
Drive Motor Oil Capacity, qts (L) ...................... 0.19 (0.18)
Maximum Speed (Std), mph (kph) ...................... 6.2 (10.0)
Maximum Speed (Opt), mph (kph) ...................... 10.7 (17.2)

Undercarriage

Tracks Type ...................... Rubber with steel inserts
Tracks Tension ...................... Grease cylinder and spring
Track Width, in (mm) ...................... 17.7 (450)
Ground Pressure (Roller Undercarriage), Bar (psi) ...................... 0.30 (4.3)
Ground Pressure (Solid-Mounted Undercarriage), Bar (psi) ...................... 0.29 (4.2)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ...................... 23.0 (87.1)
Pump Flow (Opt), gpm (Lpm) ...................... 30.5 (115.5)
System Pressure, Bar (psi) ...................... 238-245 (3450-3550)
Hydraulic Reservoir Capacity, qts (L) ...................... 10.8 (10.2)
Hydraulic System Capacity, gal (L) ...................... 11.9 (45.0)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity (Roller Undercarriage), lbs (kg) ...................... 2490 (1130)
Rated Operating Capacity (Solid-Mounted Undercarriage), lbs (kg) ...................... 2800 (1270)
Tipping Load (Roller Undercarriage), lbs (kg) ...................... 7120 (3230)
Tipping Load (Solid-Mounted Undercarriage), lbs (kg) ...................... 8010 (3630)
Boom Lifting Force (Roller Undercarriage), lbs (kg) ...................... 6800 (3085)
Boom Lifting Force (Solid-Mounted Undercarriage), lbs (kg) ...................... 6400 (2900)
Bucket Breakout Force (Roller Undercarriage), lbs (kg) ...................... 6205 (2815)
Bucket Breakout Force (Solid-Mounted Undercarriage), lbs (kg) ...................... 5885 (2670)

Dimensions and Weight

Length (w/o Bucket), in (mm) ...................... 108.4 (2750)
Length (Bucket On Ground), in (mm) ...................... 136.8 (3475)
Length (Ground Contact), in (mm) ...................... 58.5 (1485)
Width (w/o Bucket), in (mm) ...................... 72.9 (1850)
Operating Height, in (mm) ...................... 158.5 (4025)
Height (Operator Cab), in (mm) ...................... 81.3 (2065)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 124 (3150)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 96.3 (2445)
Dump Reach At Max Height, in (mm) ...................... 34.2 (870)
Rollback Angle At Ground Level, deg ...................... 31
Rollback Angle At Max Height, deg ...................... 97
Departure Angle, deg ...................... 29
Bucket Width, in (mm) ...................... 74 (1880)
Ground Clearance, in (mm) ...................... 7.3 (185)
Turning Radius (w/Bucket), in (mm) ...................... 87.7 (2225)
Operating Weight (Roller Undercarriage), lbs (kg) ...................... 10445 (4740)
Operating Weight (Solid-Mounted Undercarriage), lbs (kg) ...................... 9900 (4490)