Case 440 Series 3 Skid Steer Specifications

The Case 440 Series 3 skid steer loader is powered by 274 cu.in (4.5L) Case 445T/M3 4-cylinder direct injection turbocharged diesel engine with a rated power of 90 hp (67 kW) at 2300 rpm. The Case 440 is equipped with a two-speed hydro transmission, axial piston drive pumps, 100HV continuous roller chains, and 12x16.5 or 33-15.5x16.5 tires. The hydraulic system has a pump with fluid flow rate of 21.9 gpm (83 lpm). The hydraulic pressure is 3050 psi (210 bar). The skid steer loader has a rated operating capacity of 2200 lbs (998 kg) and tipping load of 4400 lbs (2724 kg). The lift height is 121.6" (3090 mm) to hinge pin, and dump height is 96" (2440 mm).

Engine Specs

Engine Model .................. Case 445T/M3
Engine Type .................. 4-Stroke direct injection turbocharged diesel
Number of Cylinders .................. 4
Displacement, cu in (L) .................. 274 (4.50)
Engine Bore, in (mm) .................. 4.1 (104.0)
Engine Stroke, in (mm) .................. 5.2 (132.0)
Aspiration .................. Turbocharged
Rated Engine Power, hp (kW) .................. 90.0 (67.0)
Rated Engine Speed, rpm .................. 2300
Maximum Torque, Nm (ft-lb) .................. 390 (288)
Torque Speed, rpm .................. 1300
High Idle Speed, rpm .................. 2450
Low Idle Speed, rpm .................. 1100
Firing Order .................. 1-3-4-2
Fuel System .................. Injection pump
Fuel Filter Type.................... In-line strainer
Governor Type .................. Mechanical
Lubricating System .................. Positive pressure
Oil Filter Type.................... Full-flow cartridge
Cooling System .................. Pressurized
Water Pump Type .................. Integral
Air Cleaner Type .................. Dry element
Fuel Tank Capacity, gal (L) .................. 22.0 (83.3)
Oil Capacity, qts (L) .................. 12.7 (12.0)
Coolant Capacity, qts (L) .................. 12.0 (11.4)
Electrical System Rating, Volts .................. 12
Charging System .................. Alternator
Alternator Rating, Amps .................. 95

Drive Train

Drive System Type .................. Hydrostatic, 4 wheel drive
Number of Gears .................. 2 (Low/High)
Drive Pump Type .................. Tandem, axial piston
Chain Drive Type .................. ASA 100HV continuous roller chain
Brakes Type .................. Independent wet disc
Final Drive Type .................. Single reduction planetary to chain drive
Tire Size (Std) .................. 12x16.5
Tire Size (Opt) .................. 33-15.5x16.5
Chain Case Oil Capacity (per side), qts (L) .................. 8.0 (7.6)
Forward Speed (Low), mph (kph) .................. 7.0 (11.2)
Forward Speed (High), mph (kph) .................. 11.4 (18.3)
Reverse Speed (Low), mph (kph) .................. 7.0 (11.2)
Reverse Speed (High), mph (kph) .................. 11.4 (18.3)

Hydraulic System

Hydraulic System Type .................. Open center
Hydraulic Pump Type .................. Gear
Pump Flow (Std), gpm (Lpm) .................. 21.9 (83.0)
Pump Flow (Opt), gpm (Lpm) .................. 37.8 (143.0)
System Pressure, Bar (psi) .................. 210 (3050)
Hydraulic Reservoir Capacity, gal (L) .................. 7.1 (27.0)
Hydraulic System Capacity, gal (L) .................. 13.3 (50.3)
Number of Valves .................. 3

Loader Performance

Rated Operating Capacity, lbs (kg) .................. 2200 (998)
Tipping Load, lbs (kg) .................. 4400 (1995)
Boom Lifting Force, lbs (kg) .................. 4576 (2080)
Bucket Breakout Force, lbs (kg) .................. 6207 (2820)
Loader Boom Type .................. Radial-lift

Dimensions and Weight

Wheelbase, in (mm) .................. 42.3 (1070)
Height (Operator Cab), in (mm) .................. 80 (2030)
Height (Boom Raised), in (mm) .................. 154 (3910)
Length (w/o Bucket), in (mm) .................. 102.5 (2600)
Length (Bucket On Ground), in (mm) .................. 129.4 (3290)
Width (w/o Bucket), in (mm) .................. 51.8 (1320)
Height to Hinge Pin (Fully Raised), in (mm) .................. 121.6 (3090)
Dump Angle At Max Height, deg .................. 39
Dump Height (Fully Raised), in (mm) .................. 96 (2440)
Dump Reach At Max Height, in (mm) .................. 22.8 (580)
Rollback Angle At Ground Level, deg .................. 29
Rollback Angle At Max Height, deg .................. 96
Departure Angle, deg .................. 28
Bucket Width, in (mm) .................. 66 (1680)
Ground Clearance, in (mm) .................. 9.2 (235)
Turning Radius (w/Bucket), in (mm) .................. 78.7 (1950)
Shipping Weight, lbs (kg) .................. 6390 (2900 kg)
Operating Weight, lbs (kg) .................. 7040 (3195)