Case 445CT Track Loader Maintenance Data

The Case 445CT compact track loader is powered by 274 cu.in (4.5L) Case 445/M2 vertical in-line 4-cylinder direct injection liquid-cooled diesel engine with a rated power of 80.5 hp (60 kW) at 2300 rpm. The Case 445CT is equipped with a two-speed hydro transmission, axial-piston drive pumps, and 17.7" (450 mm) rubber tracks with steel inserts. The hydraulic system has a gear pump with fluid flow rate of 21 gpm (80 lpm). The hydraulic pressure is 3050 psi (210 bar). The track loader has a rated operating capacity of 2500 lbs (1135 kg) and tipping load of 7000 lbs (3175 kg). The boom lifting force is 4738 lbs (2155 kg), and bucket breakout force is 5167 lbs (2350 kg).

Refill Capacities

Engine Oil Capacity, gal (L) .................. 3.2 (12.0)
Engine Coolant Capacity, gal (L) .................. 4.5 (17.0)
Hydraulic Reservoir Capacity, gal (L) .................. 5.7 (21.7)
Hydraulic System Capacity, gal (L) .................. 11.0 (41.5)
Final Drive Gearbox Capacity, qts (L) .................. 1.4 (1.3)
Fuel Tank Capacity, gal (L) .................. 17.3 (65.5)

Recommended Oil and Fluid

Engine Oil Type .................. SAE 15W-40. API Service Category CH or higher
Engine Coolant Type .................. Extended-Life Coolant/Antifreeze
Hydraulic Fluid Type .................. SAE 10W-30. API Service Category CH or higher
Final Drive Gearbox Oil Type .................. Gearlube GL-3/GL-5, SAE 85W-140

Service Intervals

Lubricate Cylinder Pivot Points .................. Every 50 Hours
Check Hydraulic Fluid Level .................. Every 50 Hours
Check Tracks Tension .................. Every 50 Hours
Check Track Sprocket Bolts Torque .................. Every 50 Hours
Check Battery Connections .................. Every 100 Hours
Check Alternator/Fan Belt Tension .................. Every 100 Hours
Clean Primary Air Filter .................. Every 250 Hours
Change Engine Oil .................. Every 500 Hours
Replace Engine Oil Filter .................. Every 500 Hours
Replace Fuel Filter Element .................. Every 500 Hours
Replace Hydraulic Filter Element .................. Every 500 Hours
Change Final Drive Oil .................. Every 500 Hours
Change Hydraulic System Fluid .................. Every 1000 Hours
Replace Primary Air Filter .................. Every 1000 Hours
Replace Secondary Air Filter .................. Every 1000 Hours
Change Engine Coolant .................. Every 2000 Hours

Replacement Parts

Engine Oil Filter. Part Number .................. 87803261
Engine Fuel Filter. Part Number .................. 87803194
In-Line Fuel Filter. Part Number .................. 87019604, D139225
Primary Engine Air Filter. Part Number .................. 222425A1, 86982522
Secondary Engine Air Filter. Part Number .................. 222429A1, 86982523
Hydraulic Oil Filter. Part Number .................. 87430661, 87010593 (Element)
Hydraulic Strainer. Part Number .................. 189310A1

________________________________________________________________________________

BOBCAT SKID STEER AND COMPACT TRACK LOADERS

S100