Specs, Service, and Problems of Skid Steers and Track Loaders

________________________________________________________________________________

Skid Steer Loaders / Case Skid Steer Loaders / Case 450

Case 450 Skid Steer Specifications

The Case 450 skid steer loader is powered by 274 cu.in (4.5L) Case 445T/M3 4-cylinder direct injection turbocharged diesel engine with a rated power of 90 hp (67 kW) at 2300 rpm. The Case 450 is equipped with a two-speed hydrostatic transmission, axial piston drive pumps, 100HV continuous roller chains, and 12x16.5 or 33-15.5x16.5 tires. The hydraulic system has a pump with fluid flow rate of 21.9 gpm (83 lpm). The hydraulic pressure is 3050 psi (210 bar). The skid steer loader has a rated operating capacity of 2450 lbs (1110 kg) and tipping load of 4900 lbs (2220 kg). The boom lifting force is 5690 lbs (2580 kg), and bucket breakout force is 7215 lbs (3270 kg).

Engine Specs

Engine Model .................. Case 445T/M3
Engine Type .................. 4-Stroke direct injection turbocharged diesel
Number of Cylinders .................. 4
Displacement, cu in (L) .................. 274 (4.50)
Engine Bore, in (mm) .................. 4.1 (104.0)
Engine Stroke, in (mm) .................. 5.2 (132.0)
Aspiration .................. Turbocharged
Rated Engine Power, hp (kW) .................. 90.0 (67.0)
Rated Engine Speed, rpm .................. 2300
Maximum Torque, Nm (ft-lb) .................. 390 (288)
Torque Speed, rpm .................. 1300
High Idle Speed, rpm .................. 2450
Low Idle Speed, rpm .................. 1100
Firing Order .................. 1-3-4-2
Fuel System .................. Injection pump
Fuel Filter Type.................... In-line strainer
Governor Type .................. Mechanical
Lubricating System .................. Positive pressure
Oil Filter Type.................... Full-flow cartridge
Cooling System .................. Pressurized
Water Pump Type .................. Integral
Air Cleaner Type .................. Dry element
Fuel Tank Capacity, gal (L) .................. 20.7 (78.3)
Oil Capacity, qts (L) .................. 12.7 (12.0)
Coolant Capacity, qts (L) .................. 12.0 (11.4)
Electrical System Rating, Volts .................. 12
Charging System .................. Alternator
Alternator Rating, Amps .................. 95

Drive Train

Drive System Type .................. Hydrostatic, 4 wheel drive
Number of Gears .................. 2 (Low/High)
Drive Pump Type .................. Tandem, axial piston
Chain Drive Type .................. ASA 100HV continuous roller chain
Brakes Type .................. Independent wet disc
Final Drive Type .................. Single reduction planetary to chain drive
Tire Size (Std) .................. 12x16.5
Tire Size (Opt) .................. 33-15.5x16.5
Chain Case Oil Capacity (per side), qts (L) .................. 8.0 (7.6)
Forward Speed (Low), mph (kph) .................. 6.2 (10.0)
Forward Speed (High), mph (kph) .................. 11.3 (18.1)
Reverse Speed (Low), mph (kph) .................. 6.2 (10.0)
Reverse Speed (High), mph (kph) .................. 11.3 (18.1)

Hydraulic System

Hydraulic System Type .................. Open center
Hydraulic Pump Type .................. Gear
Pump Flow (Std), gpm (Lpm) .................. 21.9 (83.0)
Pump Flow (Opt), gpm (Lpm) .................. 41.8 (158.0)
System Pressure, Bar (psi) .................. 210 (3050)
Hydraulic Reservoir Capacity, gal (L) .................. 7.0 (26.5)
Hydraulic System Capacity, gal (L) .................. 17.0 (64.5)
Number of Valves .................. 3

Loader Performance

Rated Operating Capacity, lbs (kg) .................. 2450 (1110)
Tipping Load, lbs (kg) .................. 4900 (2220)
Boom Lifting Force, lbs (kg) .................. 5690 (2580)
Bucket Breakout Force, lbs (kg) .................. 7215 (3270)
Loader Boom Type .................. Radial-lift

Dimensions and Weight

Height (Operator Cab), in (mm) .................. 83.2 (2115)
Length (w/o Bucket), in (mm) .................. 108.5 (2755)
Length (Bucket On Ground), in (mm) .................. 140.7 (3575)
Width (w/o Bucket), in (mm) .................. 59 (1500)
Height to Hinge Pin (Fully Raised), in (mm) .................. 124.5 (3160)
Dump Angle At Max Height, deg .................. 44
Dump Height (Fully Raised), in (mm) .................. 94.5 (2400)
Dump Reach At Max Height, in (mm) .................. 26.4 (670)
Rollback Angle At Ground Level, deg .................. 30
Departure Angle, deg .................. 26
Bucket Width, in (mm) .................. 82 (2080)
Ground Clearance, in (mm) .................. 9.2 (235)
Shipping Weight, lbs (kg) .................. 7850 (3570)
Operating Weight, lbs (kg) .................. 8630 (3915)

________________________________________________________________________________

________________________________________________________________________________________

BOBCAT SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

GEHL SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

CASE SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________