Caterpillar 216B3 Skid Steer Specifications

The Caterpillar 216B3 skid steer loader driveline system components: a 134.1 cu.in (2.2L) Cat C2.2 four-cylinder direct injection liquid cooled diesel engine with a rated power of 48 hp (35 kW), and 1-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 16 gal/min (61 l/min). The system relief pressure is 3335 psi (230 bar). The Cat 216B3 is equipped with radial-lift loader boom, 80HS continuous roller chains, and 10x16.5 tires. The skid steer loader has a boom lifting force of 3168 lbs (1437 kg) and bucket breakout force of 4083 lbs (1852 kg). The rated operating capacity is 1400 lbs (635 kg), and tipping load is 2800 lbs (1852 kg).

Engine Specs

Engine Model .................... Caterpillar C2.2
Engine Type .................... 4-cycle liquid cooled diesel
Number of Cylinders .................... 4, in-line
Displacement, cu.in (L) .................... 134.1 (2.19)
Cylinder Bore, in (mm) .................... 3.31 (84.0)
Piston Stroke, in (mm) .................... 3.94 (100.0)
Aspiration .................... Naturally aspirated
Rated Engine Power, hp (kW) .................... 48.0 (35.0)
Maximum Engine Power, hp (kW) .................... 51.0 (38.0)
Rated Engine Speed, rpm .................... 3000
Compression Ratio .................... 23.3:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct Injection
Air Cleaner .................... Dual element, radial seal
Valve Lash, in (mm) .................... 0.008 (0.20)
Fuel Tank Capacity, gal (L) .................... 15.4 (58.0)
Oil Capacity, qts (L) .................... 10.6 (10.0)
Coolant Capacity, qts (L) .................... 10.6 (10.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 65

Drive Train

Drive System Type .................... Hydrostatic transmission, 4-wheel chain drive
Number of Gears .................... Single
Chain Drive Type .................... 80HS continuous roller chain
Brakes Type .................... Wet multi disc
Front Tire Size .................... 10x16.5
Rear Tire Size .................... 10x16.5
Chaincase Capacity, qts (L) .................... 6.4 (6.0)
Forward Speed, mph (kph) .................... 7.9 (12.7)
Reverse Speed, mph (kph) .................... 7.9 (12.7)

Hydraulic System

Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Flow, gpm (Lpm) .................... 16.0 (61.0)
System Pressure, Bar (psi) .................... 230 (3335)
Hydraulic Tank Capacity, gal (L) .................... 9.2 (35.0)
Hydraulic System Capacity, gal (L) .................... 14.5 (55.0)
Number of Valves .................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) .................... 1400 (635)
Tipping Load, lbs (kg) .................... 2800 (1270)
Boom Lifting Force, lbs (kg) .................... 3168 (1437)
Bucket Breakout Force, lbs (kg) .................... 4083 (1852)
Loader Boom Type .................... Radial-lift

Dimensions and Weight

Wheelbase, in (mm) .................... 39 (990)
Height (Operator Cab), in (mm) .................... 77 (1950)
Height (Boom Raised), in (mm) .................... 146 (3710)
Length (w/o Bucket), in (mm) .................... 99.2 (2520)
Length (Bucket On Ground), in (mm) .................... 127.4 (3235)
Width (w/o Bucket), in (mm) .................... 60 (1520)
Height to Hinge Pin (Fully Raised), in (mm) .................... 112.4 (2855)
Height to Hinge Pin (Carry Position), in (mm) .................... 7.8 (200)
Dump Angle At Max Height, deg .................... 40
Dump Height (Fully Raised), in (mm) .................... 85.4 (2170)
Dump Reach At Max Height, in (mm) .................... 20 (505)
Rollback Angle At Max Height, deg .................... 81
Departure Angle, deg .................... 26
Bucket Width, in (mm) .................... 60 (1520)
Ground Clearance, in (mm) .................... 7.7 (195)
Turning Radius (w/Bucket), in (mm) .................... 76.5 (1945)
Shipping Weight, lbs (kg) .................... 5120 (2325)
Operating Weight, lbs (kg) .................... 5690 (2585)