Caterpillar 236B Skid Steer Specifications

The Cat 236B skid steer loader driveline system components: a 201.2 cu.in (3.3L) Caterpillar 3044C DIT four-cylinder direct injection turbocharged diesel engine with a rated power of 70 hp (52 kW), and 1-speed or 2-speed transmission. The hydraulic system has a pump with a rated capacity of 21.9 gal/min (83 l/min). The system pressure is 3335 psi (230 bar). The Cat 236B is equipped with wet multi disc brakes, 100HS roller chains, and 12x16.5 tires. The skid steer loader has a maximum lift height of 122" (3100 mm) to hinge pin and dump height of 94.3" (2395 mm). The rated operating capacity is 1750 lbs (793 kg), and tipping load is 4012 lbs (1820 kg).

Engine Specs

Engine Model ...................... Cat 3044C DIT
Engine Type ...................... 4-cycle water-cooled diesel
Number of Cylinders ...................... 4, in-line
Displacement, cu.in (L) ...................... 201.2 (3.31)
Cylinder Bore, in (mm) ...................... 3.70 (94.0)
Piston Stroke, in (mm) ...................... 4.72 (120.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 70.0 (52.0)
Maximum Engine Power, hp (kW) ...................... 73.0 (54.0)
Rated Engine Speed, rpm ...................... 2500
Compression Ratio ...................... 22:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubrication System ...................... Forced circulation
Cooling System ...................... Forced water cooling by centrifugal pump
Air Cleaner ...................... Dual element, radial seal
Fuel Tank Capacity, gal (L) ...................... 23.7 (90.0)
Oil Capacity, qts (L) ...................... 10.6 (10.0)
Coolant Capacity, qts (L) ...................... 11.1 (10.5)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... Hydrostatic, four wheel chain drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (high/low)
Chain Drive Type ...................... 100 HS continuous roller chain
Brakes Type ...................... Wet multi disc
Front Tire Size (Std) ...................... 12x16.5
Rear Tire Size (Std) ...................... 12x16.5
Front Tire Size (Opt) ...................... 8.00x16
Rear Tire Size (Opt) ...................... 8.00x16
Chaincase Capacity, qts (L) ...................... 7.4 (7.0)
Maximum Speed (Std), mph (kph) ...................... 7.6 (12.2)
Maximum Speed (Opt), mph (kph) ...................... 11.6 (18.6)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow, gpm (Lpm) ...................... 21.9 (83.0)
System Pressure, Bar (psi) ...................... 230 (3335)
Hydraulic Reservoir Capacity, gal (L) ...................... 9.2 (35.0)
Hydraulic System Capacity, gal (L) ...................... 13.7 (52.0)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 1750 (793)
Tipping Load, lbs (kg) ...................... 4012 (1820)
Boom Lifting Force, lbs (kg) ...................... 4655 (2112)
Bucket Breakout Force, lbs (kg) ...................... 5485 (2487)

Dimensions and Weight

Wheelbase, in (mm) ...................... 44.7 (1135)
Height (Operator Cab), in (mm) ...................... 82.3 (2090)
Height (Boom Raised), in (mm) ...................... 156 (3965)
Length (w/o Bucket), in (mm) ...................... 110.1 (2800)
Length (Bucket On Ground), in (mm) ...................... 138.4 (3515)
Width (w/o Bucket), in (mm) ...................... 66 (1675)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 122 (3100)
Height to Hinge Pin (Carry Position), in (mm) ...................... 10 (255)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 94.3 (2395)
Dump Reach At Max Height, in (mm) ...................... 21.2 (540)
Rollback Angle At Ground Level, deg ...................... 29
Rollback Angle At Max Height, deg ...................... 97
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 66 (1675)
Ground Clearance, in (mm) ...................... 9.2 (235)
Turning Radius (w/Bucket), in (mm) ...................... 82.5 (2095)
Shipping Weight, lbs (kg) ...................... 6360 (2890)
Operating Weight, lbs (kg) ...................... 7005 (3180)