Specs, Service, and Problems of Skid Steers and Track Loaders

________________________________________________________________________________

Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 246D3

Caterpillar 246D3 Skid Steer Specifications

The Cat 246D3 skid steer loader is powered by 203.1 cu.in (3.3L) Caterpillar C3.3B DIT 4-cylinder turbocharged diesel engine with a rated power of 72.9 hp (54.4 kW) at 2500 rpm. The Cat 246D3 is equipped with a two-speed hydrostatic transmission, radial-lift loader boom, 100HS continuous roller chains, and 12x16.5 tires. The hydraulic system has a high flow XPS pump with flow rate of 32 gpm (121 lpm). The high flow XPS hydraulic pressure is 4060 psi (280 bar). The skid steer loader has a rated operating capacity of 2200 lbs (1000 kg) and tipping load of 4400 lbs (2000 kg). The lift height is 124.2" (3155 mm) to hinge pin, and dump height is 97.1" (2465 mm).

Engine Specs

Engine Model .................... Caterpillar C3.3B DIT
Engine Type .................... 4-cycle liquid cooled diesel
Number of Cylinders .................... 4, in-line
Displacement, cu.in (L) .................... 203.1 (3.30)
Cylinder Bore, in (mm) .................... 3.70 (94.0)
Piston Stroke, in (mm) .................... 4.72 (120.0)
Aspiration .................... Turbocharged
Rated Engine Power, hp (kW) .................... 72.9 (54.4)
Maximum Engine Power, hp (kW) .................... 74.3 (55.4)
Rated Engine Speed, rpm .................... 2400
Compression Ratio .................... 17:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct Injection
Air Cleaner .................... Dual element, radial seal
Emission Level .................... Tier 4 Interim
Fuel Tank Capacity, gal (L) .................... 27.7 (105.0)
Oil Capacity, qts (L) .................... 11.8 (11.0)
Coolant Capacity, qts (L) .................... 14.8 (14.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 80

Drive Train

Drive System Type .................... Hydrostatic transmission, 4-wheel chain drive
Number of Gears .................... Two (low-high)
Chain Drive Type .................... 100HS continuous roller chain
Brakes Type .................... Wet multi disc
Front Tire Size .................... 12x16.5
Rear Tire Size .................... 12x16.5
Chaincase Capacity, qts (L) .................... 13.5 (12.7)
Forward Speed (Low Range), mph (kph) .................... 7.7 (12.5)
Forward Speed (High Range), mph (kph) .................... 11.0 (17.7)
Reverse Speed (Low Range), mph (kph) .................... 7.7 (12.5)
Reverse Speed (High Range), mph (kph) .................... 11.0 (17.7)

Hydraulic System

Hydraulic System Type .................... Load-sensing
Hydraulic Pump Type .................... Variable displacement, axial piston
Pump Flow (Standard), gpm (Lpm) .................... 23.0 (86.0)
Pump Flow (High Flow XPS), gpm (Lpm) .................... 32.0 (121.0)
System Pressure (Standard), Bar (psi) .................... 230 (3335)
System Pressure (High Flow XPS), Bar (psi) .................... 280 (4060)
Hydraulic Tank Capacity, gal (L) .................... 10.3 (39.0)
Hydraulic System Capacity, gal (L) .................... 13.7 (52.0)
Number of Valves .................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) .................... 2200 (1000)
Tipping Load, lbs (kg) .................... 4400 (2000)
Boom Lifting Force, lbs (kg) .................... 4605 (2090)
Bucket Breakout Force, lbs (kg) .................... 7355 (3335)
Loader Boom Type .................... Radial-lift

Dimensions and Weight

Wheelbase, in (mm) .................... 49.2 (1250)
Height (Operator Cab), in (mm) .................... 83.1 (2110)
Height (Boom Raised), in (mm) .................... 158.7 (4030)
Length (w/o Bucket), in (mm) .................... 117.8 (2995)
Length (Bucket On Ground), in (mm) .................... 146 (3710)
Width (w/o Bucket), in (mm) .................... 66 (1675)
Height to Hinge Pin (Fully Raised), in (mm) .................... 124.2 (3155)
Height to Hinge Pin (Carry Position), in (mm) .................... 7.9 (200)
Dump Angle At Max Height, deg .................... 39
Dump Height (Fully Raised), in (mm) .................... 97.1 (2465)
Dump Reach At Max Height, in (mm) .................... 23.6 (600)
Rollback Angle At Max Height, deg .................... 96
Departure Angle, deg .................... 26
Bucket Width, in (mm) .................... 72 (1830)
Ground Clearance, in (mm) .................... 8.9 (225)
Turning Radius (w/Bucket), in (mm) .................... 85.8 (2180)
Shipping Weight, lbs (kg) .................... 6800 (3090)
Operating Weight, lbs (kg) .................... 7480 (3390)

________________________________________________________________________________

________________________________________________________________________________________

BOBCAT SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

GEHL SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

CASE SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________