Caterpillar 299C Track Loader Maintenance Data

The Caterpillar 299C compact track loader driveline system components: a 201.2 cu.in (3.3L) Cat C3.4 DIT 4-cylinder turbocharged liquid-cooled diesel engine with a rated power of 90 hp (67 kW), and two-speed transmission. The hydraulic system has a pump with a rated flow of 22 gpm (84 lpm). The system pressure is 3335 psi (230 bar). The Caterpillar 299C is equipped with planetary final drives, steel embedded rubber tracks, and wet multi disc brakes. The loader has a lift height of 126.3" (3210 mm) to hinge pin and bucket breakout force of 7310 lbs (3315 kg). The rated operating capacity is 2905 lbs (1318 kg), and tipping load is 8340 lbs (3780 kg).

Refill Capacities

Engine Oil Capacity, gal (L) ...................... 2.65 (10.0)
Engine Coolant Capacity, gal (L) ...................... 3.7 (14.0)
Hydraulic Tank Fluid Capacity, gal (L) ...................... 10.3 (39.0)
Hydraulic System Fluid Capacity, gal (L) ...................... 15.0 (57.0)
Final Drive Oil Capacity, qts (L) ...................... 1.1 (1.0)

Recommended Oil and Fluid

Engine Oil Type ...................... Cat DEO-ULS, SAE 10W-30, 15W-40. API Service Category CE, CF-4, CG-4
Engine Coolant Type ...................... Caterpillar Diesel Engine Antifreeze/Coolant
Hydraulic Fluid Type ...................... Cat HYDO Advanced, SAE 30, SAE 10W, Cat TDTO-TMS Multi-Grade
Final Drive Oil Type ...................... SAE 80W-90 or 85W-140 Gear Oil, API Service Category GL-5

Service Intervals

Lubricate Cylinder Pivot Points ...................... Every 50 Hours
Check and Adjust Track Tension ...................... Every 100 Hours
Check and Adjust Belts ...................... Every 250 Hours
Check Final Drive Oil Level ...................... Every 250 Hours
Clean Primary Engine Air Filter ...................... Every 250 Hours
Clean Cab Air Filters ...................... Every 250 Hours
Change Engine Oil ...................... Every 500 Hours
Replace Engine Oil Filter ...................... Every 500 Hours
Replace Primary Fuel Filter ...................... Every 500 Hours
Replace Final Fuel Filter ...................... Every 500 Hours
Replace Hydraulic Tank Breather ...................... Every 500 Hours
Replace Hydraulic Oil Filter ...................... Every 500 Hours
Change Final Drive Oil ...................... Every 500 Hours
Replace Primary Engine Air Filter ...................... Every 1000 Hours
Replace Secondary Engine Air Filter ...................... Every 1000 Hours
Replace Cab Air Filters ...................... Every 2000 Hours
Change Hydraulic Fluid ...................... Every 2000 Hours
Service And Refill Cooling System ...................... Every 6000 Hours

Replacement Parts

Engine Oil Filter. Part Number ...................... 1R0734, 2672528
Fuel Water Separator. Part Number ...................... 2339856
In-line Fuel Filter. Part Number ...................... 1G7206
Primary Engine Air Filter. Part Number ...................... 1106326
Secondary Engine Air Filter. Part Number ...................... 1106331
Cab Air Filter. Part Number ...................... 2656618, 2656619
Hydraulic Oil Tank Breather. Part Number ...................... 2582829
Hydraulic Oil Filter. Part Number ...................... 1G8878

________________________________________________________________________________

________________________________________________________________________________________

BOBCAT SKID STEER AND COMPACT TRACK LOADERS

S100