Gehl CTL60 Track Loader Maintenance Data

The Gehl CTL60 compact track loader is powered by 202.5 cu.in (3.3L) Yanmar 4TNV98 vertical in-line 4-cylinder liquid-cooled diesel engine with a rated power of 67 hp (49.3 kW) at 2500 rpm. The Gehl CTL60 is equipped with a two-speed hydro transmission, radial-lift loader boom, undercarriage with four steel rollers, and 12.6" (320 mm) rubber tracks. The hydraulic system has a pump with fluid flow rate of 18 gpm (68.2 lpm). The hydraulic pressure is 3000 psi (207 bar). The track loader has a rated operating capacity of 1620 lbs (735 kg) and tipping load of 4630 lbs (2100 kg). The lift height is 119.3" (3030 mm) to hinge pin, and dump height is 93.4" (2370 mm).

Refill Capacities

Fuel Tank Capacity, gal (L) ...................... 19.8 (75.0)
Engine Oil Capacity, gal (L) ...................... 2.7 (10.2)
Engine Coolant Capacity, gal (L) ...................... 2.9 (10.9)
Hydraulic Tank Fluid Capacity, gal (L) ...................... 10.2 (39.0)
Hydraulic System Fluid Capacity, gal (L) ...................... 15.9 (60.3)
Reduction Gearbox Oil Capacity, qts (L) ...................... 1.2 (1.1)

Recommended Oil and Fluid

Engine Oil Type ...................... SAE 10W-30, 15W-40, 5W-20. API Service Category CD or higher
Engine Coolant Type ...................... Ultralife Antifreeze/Coolant
Hydraulic Fluid Type ...................... SAE 10W-30. API Service Category CD or higher
Reduction Gearbox Oil Type ...................... SAE 80W-90 Gear Oil, API Service Category GL-4

Service Intervals

Lubricate Cylinder Pivot Points ...................... Every 50 Hours
Check and Adjust Track Tension ...................... Every 50 Hours
Check Reduction Gearbox Oil Level ...................... Every 50 Hours
Clean Water Separator ...................... Every 100 Hours
Check Battery Condition...................... Every 250 Hours
Change Engine Oil ...................... Every 250 Hours
Replace Engine Oil Filter ...................... Every 250 Hours
Check and Adjust Fan Belt ...................... Every 250 Hours
Replace Engine Fuel Filter ...................... Every 500 Hours
Replace Hydraulic Oil Return Filter ...................... Every 500 Hours
Replace Hydraulic Pilot Line Filter ...................... Every 500 Hours
Clean Radiator Fins ...................... Every 500 Hours
Change Primary Engine Air Filter ...................... Every 1000 Hours
Replace Secondary Engine Air Filter ...................... Every 1000 Hours
Change Hydraulic Fluid ...................... Every 1000 Hours
Change Reduction Gearbox Oil ...................... Every 1000 Hours
Change Suction Strainer ...................... Every 1000 Hours
Check Valve Clearance ...................... Every 1000 Hours
Service And Refill Cooling System ...................... Every 1000 Hours

Replacement Parts

Engine Oil Filter. Part Number ...................... 182131 (Cartridge)
Engine Fuel Filter. Part Number ...................... 182130 (Cartridge)
Primary Engine Air Filter. Part Number ...................... 182132 (Element)
Secondary Engine Air Filter. Part Number ...................... 182133 (Element)
Hydraulic Oil Return Filter. Part Number ...................... 181607 (Cartridge)
Hydraulic Pilot Line Filter. Part Number ...................... 180324 (Element)

________________________________________________________________________________

________________________________________________________________________________________

BOBCAT SKID STEER AND COMPACT TRACK LOADERS

S100