Specs, Service, and Problems of Skid Steers and Track Loaders

________________________________________________________________________________

Skid Steer Loaders / John Deere Skid Steer Loaders / John Deere 316GR

John Deere 316GR Skid Steer Specifications

The John Deere 316GR skid steer loader is powered by 128.1 cu.in (2.1L) Yanmar 4TNV86CHT 4-cylinder turbocharged diesel engine with a rated power of 61 hp (45.6 kW) at 2600 rpm. The John Deere 316GR is equipped with one-speed or two-speed transmission, vertical-lift loader boom, 80 HD drive chains, automatic wet disc brakes, and 10x16.5 tires. The hydraulic system has a pump with fluid flow rate of 17 gpm (64 lpm). The hydraulic pressure is 3450 psi (238 bar). The skid steer has a rated operating capacity of 1750 lbs (795 kg) and tipping load of 3500 lbs (1590 kg). The lift height is 115" (2920 mm) to hinge pin, and dump height is 88.5" (2250 mm).

Engine Specs

Engine Model ...................... Yanmar 4TNV86CHT
Engine Type ...................... Vertical in-line 4-cycle 4-cylinder turbocharged diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 128.1 (2.09)
Cylinder Bore, in (mm) ...................... 3.39 (86.0)
Piston Stroke, in (mm) ...................... 3.54 (90.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 61.0 (45.6)
Maximum Engine Power, hp (kW) ...................... 65.0 (48.5)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 207 (153)
Torque Speed, rpm ...................... 1690
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Injection ...................... High pressure common rail
Fuel System Control ...................... Electronic
Lubrication System ...................... Forced lubrication with trochoid pump
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 19.0 (71.0)
Oil Capacity, qts (L) ...................... 7.9 (7.5)
Coolant Capacity, qts (L) ...................... 12.8 (12.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 70

Drive Train

Drive System Type ...................... 4-wheel drive, hydrostatic transmission
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low/high)
Chain Drive Type ...................... 80 HD heavy-duty chains, continuous loop
Brakes Type ...................... Integral automatic wet disc
Front Tire Size ...................... 10x16.5
Rear Tire Size ...................... 10x16.5
Axles Type ...................... Induction-hardened
Final Drive ...................... Chains, high strength, adjustment free
Chain Case Capacity (Each), qts (L) ...................... 14.8 (14.0)
Maximum Speed (Single Range), mph (kph) ...................... 6.9 (11.1)
Maximum Speed (Low Range), mph (kph) ...................... 6.9 (11.1)
Maximum Speed (High Range), mph (kph) ...................... 10.1 (16.3)

Hydraulic System

Hydraulic System Type ...................... Open center
Pump Flow, gpm (Lpm) ...................... 17.0 (64.0)
System Pressure, Bar (psi) ...................... 238 (3450)
Hydraulic Tank Capacity, gal (L) ...................... 6.1 (23.0)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 1750 (795)
Tipping Load, lbs (kg) ...................... 3500 (1590)
Boom Lifting Force, lbs (kg) ...................... 4750 (2157)
Bucket Breakout Force, lbs (kg) ...................... 5250 (2384)
Loader Boom Type ...................... Radial-lift

Dimensions and Weight

Wheelbase, in (mm) ...................... 41.5 (1050)
Height (Operator Cab), in (mm) ...................... 77.1 (1960)
Length (w/o Bucket), in (mm) ...................... 103.5 (2630)
Length (Bucket On Ground), in (mm) ...................... 127.6 (3240)
Width (w/o Bucket), in (mm) ...................... 63 (1600)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 115 (2920)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 88.5 (2250)
Dump Reach At Max Height, in (mm) ...................... 15.8 (400)
Rollback Angle At Ground Level, deg ...................... 30
Departure Angle, deg ...................... 22.3
Bucket Width, in (mm) ...................... 66 (1675)
Ground Clearance, in (mm) ...................... 7.1 (180)
Turning Radius (w/Bucket), in (mm) ...................... 79.4 (2010)
Shipping Weight, lbs (kg) ...................... 5620 (2555)
Operating Weight, lbs (kg) ...................... 6180 (2805)

________________________________________________________________________________

________________________________________________________________________________________

BOBCAT SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

GEHL SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

CASE SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________