John Deere 325 Skid Steer Specifications

The John Deere 325 skid steer loader driveline system components: a 186 cu.in (3L) JD PowerTech 5030T five-cylinder turbocharged diesel engine with a rated power of 70 hp (51.9 kW), and 1-speed or 2-speed transmission. The hydraulic system has a pump with a rated capacity of 22 gal/min (84 l/min). The system pressure is 3100 psi (214 bar). The John Deere 325 is equipped with vertical-lift loader boom, 100 HD drive chains, hydraulic wet disc brakes, and 12x16.5 tires. The skid steer has a max lift height of 125.2" (3180 mm) to hinge pin and dump height of 100" (2540 mm). The rated operating capacity is 2500 lbs (1135 kg), and tipping load is 5000 lbs (2270 kg).

Engine Specs

Engine Model ...................... John Deere PowerTech 5030T
Engine Type ...................... 4-cycle 5-cylinder turbocharged diesel
Number of Cylinders ...................... Five
Displacement, cu.in (L) ...................... 186 (3.05)
Cylinder Bore, in (mm) ...................... 3.39 (86.0)
Piston Stroke, in (mm) ...................... 4.13 (105.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 70.0 (51.9)
Maximum Engine Power, hp (kW) ...................... 76.0 (56.7)
Rated Engine Speed, rpm ...................... 2800
Slow Idle Speed, rpm ...................... 900
Fast Idle Speed, rpm ...................... 3000
Compression Ratio ...................... 18.1:1
Firing Order ...................... 1-2-4-5-3
Fuel System ...................... Injection pump
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Tier 2
Fuel Tank Capacity, gal (L) ...................... 24.0 (91.0)
Oil Capacity, qts (L) ...................... 12.5 (11.8)
Coolant Capacity, qts (L) ...................... 10.6 (10.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 70

Drive Train

Drive System Type ...................... 4-wheel drive, hydrostatic transmission
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low/high)
Chain Drive Type ...................... 100 HD heavy-duty chains, continuous loop
Brakes Type ...................... Hydraulic wet disc
Front Tire Size ...................... 12x16.5
Rear Tire Size ...................... 12x16.5
Axles Type ...................... Induction-hardened
Final Drive ...................... Chains, high strength, adjustment free
Chain Case Capacity (Each), qts (L) ...................... 9.2 (8.7)
Maximum Speed (Single Range), mph (kph) ...................... 7.0 (11.3)
Maximum Speed (Low Range), mph (kph) ...................... 6.0 (9.7)
Maximum Speed (High Range), mph (kph) ...................... 11.0 (17.7)

Hydraulic System

Hydraulic System Type ...................... Open center
Pump Flow (Std), gpm (Lpm) ...................... 22.0 (84.0)
Pump Flow (Opt), gpm (Lpm) ...................... 34.0 (129.0)
System Pressure, Bar (psi) ...................... 214 (3100)
Hydraulic Tank Capacity, gal (L) ...................... 8.7 (33.1)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 2500 (1135)
Tipping Load, lbs (kg) ...................... 5000 (2270)
Boom Lifting Force, lbs (kg) ...................... 4800 (2180)
Bucket Breakout Force, lbs (kg) ...................... 7500 (3405)
Loader Boom Type ...................... Vertical-lift

Dimensions and Weight

Wheelbase, in (mm) ...................... 48 (1215)
Height (Operator Cab), in (mm) ...................... 80.7 (2050)
Length (w/o Bucket), in (mm) ...................... 115.3 (2930)
Length (Bucket On Ground), in (mm) ...................... 138.5 (3520)
Width (w/o Bucket), in (mm) ...................... 73.6 (1870)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 125.2 (3180)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 100 (2540)
Dump Reach At Max Height, in (mm) ...................... 34.1 (865)
Rollback Angle At Ground Level, deg ...................... 35
Departure Angle, deg ...................... 27
Bucket Width, in (mm) ...................... 78 (1980)
Ground Clearance, in (mm) ...................... 9 (230)
Turning Radius (w/Bucket), in (mm) ...................... 83.8 (2130)
Shipping Weight, lbs (kg) ...................... 7630 (3470)
Operating Weight, lbs (kg) ...................... 8390 (3810)