John Deere 325G Track Loader Maintenance Data

The John Deere 325G compact track loader is powered by 202.5 cu.in (3.3L) Yanmar 4TNV98CT 4-cylinder turbocharged diesel engine with a rated power of 70 hp (52.5 kW) at 2500 rpm. The John Deere 325G is equipped with 1-speed or 2-speed hydro transmission, vertical-lift loader boom, and 12.6" (320 mm) or 15.8" (400 mm) rubber tracks with steel inserts. The hydraulic system has a pump with fluid flow rate of 21 gpm (78 lpm). The hydraulic pressure is 3450 psi (238 bar). The track loader has a rated operating capacity of 2590 lbs (1176 kg) and tipping load of 7400 lbs (3360 kg). The lift height is 126" (3200 mm) to hinge pin, and dump height is 102" (2590 mm).

Refill Capacities

Engine Oil Capacity, gal (L) ...................... 2.7 (10.2)
Engine Coolant Capacity, gal (L) ...................... 3.4 (13.0)
Hydraulic Fluid Capacity, gal (L) ...................... 7.1 (27.0)
Planetary Gearbox Oil Capacity, qts (L) ...................... 0.85 (0.80)

Recommended Oil and Fluid

Engine Oil Type ...................... Plus 50, SAE 10W-30, SAE 10W-40, SAE 15W-40. API Service CJ-4, CK-4
Engine Coolant Type ...................... John Deere Cool-Gard II or Cool-Gard II PG
Hydraulic Fluid Type ...................... John Deere Plus-50, Hydrau, Hydrau XR, Hydrau-Gard
Planetary Gearbox Oil Type ...................... John Deere GL-5, SAE 80W-90, 85W-140

Service Intervals

Lubricate Cylinder Pivot Points ...................... Every 50 Hours
Check Track Tension ...................... Every 50 Hours
Clean Primary Air Filter ...................... Every 250 Hours
Clean Fuel Filter ...................... Every 250 Hours
Change Engine Oil ...................... Every 500 Hours
Replace Engine Oil Filter ...................... Every 500 Hours
Replace Primary Fuel Filter ...................... Every 500 Hours
Replace Final Fuel Filter ...................... Every 500 Hours
Replace Primary Engine Air Filter ...................... Every 500 Hours
Replace Hydraulic Oil Filter ...................... Every 500 Hours
Change Planetary Gearbox Oil ...................... Every 500 Hours
Check Engine Coolant ...................... Every 1000 Hours
Replace Hydraulic Oil Reservoir Breather ...................... Every 1000 Hours
Replace Secondary Engine Air Filter ...................... Every 1000 Hours
Change Hydraulic Fluid ...................... Every 1000 Hours
Change Hydraulic Reservoir Oil ...................... Every 1000 Hours
Service And Refill Cooling System ...................... Every 3000 Hours

Replacement Parts

Engine Oil Filter. Part Number ...................... MIU800650
Primary Fuel Filter. Part Number ...................... MIU801025
Final Fuel Filter. Part Number ...................... MIU801090
Primary Engine Air Filter. Part Number ...................... AT338105
Secondary Engine Air Filter. Part Number ...................... AT336803
Hydraulic Oil Reservoir Breather. Part Number ...................... AT101565
Transmission Oil Filter. Part Number ...................... AT510417

________________________________________________________________________________

BOBCAT SKID STEER AND COMPACT TRACK LOADERS

S100