John Deere 332E Skid Steer Specifications

The John Deere 332E skid steer loader driveline system components: a 186.3 cu.in (3.1L) Yanmar 4TNV94FHT four-cylinder turbocharged intercooled diesel engine with a rated power of 100 hp (74.6 kW), and 1-speed or 2-speed transmission. The hydraulic system has a pump with a rated capacity of 25 gal/min (95 l/min). The system pressure is 3450 psi (238 bar). The John Deere 332E is equipped with integral automatic wet disc brakes and 14x17.5 tires. The skid steer loader has a maximum lift height of 127" (3225 mm) to hinge pin and dump height of 102" (2590 mm). The rated operating capacity is 3200 lbs (1455 kg), and tipping load is 6400 lbs (2905 kg).

Engine Specs

Engine Model ...................... Yanmar 4TNV94CHT
Engine Type ...................... Vertical in-line 4-cycle 4-cylinder turbocharged diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 186.3 (3.06)
Cylinder Bore, in (mm) ...................... 3.70 (94.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged, intercooled
Rated Engine Power, hp (kW) ...................... 100.0 (74.6)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 395 (291)
Torque Speed, rpm ...................... 1700
Firing Order ...................... 1-3-4-2
Fuel System ...................... Common rail direct injection
Lubrication System ...................... Forced lubrication with trochoid pump
Fuel Tank Capacity, gal (L) ...................... 25.5 (96.5)
Oil Capacity, qts (L) ...................... 10.8 (10.2)
Coolant Capacity, qts (L) ...................... 15.9 (15.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 70

Drive Train

Drive System Type ...................... 4-wheel drive, hydrostatic with electro-hydraulic controls
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low/high)
Chain Drive Type ...................... 100 HD continuous loop
Brakes Type ...................... Integral automatic wet disc
Front Tire Size ...................... 14x17.5
Rear Tire Size ...................... 14x17.5
Chain Case Capacity (Each), qts (L) ...................... 25.4 (24.0)
Maximum Speed (Single Range), mph (kph) ...................... 7.0 (11.3)
Maximum Speed (Low Range), mph (kph) ...................... 7.0 (11.3)
Maximum Speed (High Range), mph (kph) ...................... 12.0 (19.3)

Hydraulic System

Hydraulic System Type ...................... Open center
Pump Flow (Std), gpm (Lpm) ...................... 25.0 (95.0)
Pump Flow (Opt), gpm (Lpm) ...................... 38.0 (144.0)
System Pressure, Bar (psi) ...................... 238 (3450)
Hydraulic Capacity, gal (L) ...................... 8.7 (33.0)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 3200 (1455)
Tipping Load, lbs (kg) ...................... 6400 (2905)
Boom Lifting Force, lbs (kg) ...................... 6600 (2995)
Bucket Breakout Force, lbs (kg) ...................... 13875 (6300)

Dimensions and Weight

Wheelbase, in (mm) ...................... 48.3 (1225)
Height (Operator Cab), in (mm) ...................... 84.8 (2150)
Length (w/o Bucket), in (mm) ...................... 120 (3050)
Length (Bucket On Ground), in (mm) ...................... 144 (3655)
Width (w/o Bucket), in (mm) ...................... 78.4 (1990)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 127 (3225)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 102 (2590)
Dump Reach At Max Height, in (mm) ...................... 31.6 (800)
Rollback Angle At Ground Level, deg ...................... 35
Departure Angle, deg ...................... 29
Bucket Width, in (mm) ...................... 78 (1980)
Ground Clearance, in (mm) ...................... 10.8 (270)
Turning Radius (w/Bucket), in (mm) ...................... 85.3 (2165)
Operating Weight, lbs (kg) ...................... 9610 (4365)