John Deere 332G Skid Steer Specifications

The John Deere 332G skid steer loader driveline system components: a 186.3 cubic inches (3.1L) Yanmar 4TNV94FHT 4-cylinder turbocharged intercooled diesel engine with a rated power of 100 hp (74.6 kW), and 2-speed transmission. The hydraulic system has a pump with a rated capacity of 25 gpm (95 lpm). The system relief pressure is 3450 psi (238 bar). The John Deere 332G is equipped with hydraulic wet disc brakes and 14x17.5 tires. The skid steer loader has a boom lifting force of 8520 lbs (3865 kg) and bucket breakout force of 13904 lbs (6307 kg). The rated operating capacity is 3600 lbs (1633 kg), and tipping load is 7200 lbs (3272 kg).

Engine Specs

Engine Model ...................... Yanmar 4TNV94FHT
Engine Type ...................... Vertical in-line 4-cycle 4-cylinder turbocharged diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 186.3 (3.06)
Cylinder Bore, in (mm) ...................... 3.70 (94.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged, intercooled
Rated Engine Power, hp (kW) ...................... 100.0 (74.6)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 395.0 (291.3)
Torque Speed, rpm ...................... 1700
Firing Order ...................... 1-3-4-2
Fuel System ...................... Common rail direct injection
Lubrication System ...................... Forced lubrication with trochoid pump
Fuel Tank Capacity, gal (L) ...................... 25.5 (96.5)
Oil Capacity, qts (L) ...................... 10.8 (10.2)
Coolant Capacity, qts (L) ...................... 15.9 (15.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... 4-wheel drive, hydrostatic with electro-hydraulic controls
Number of Gears ...................... 2 (low/high)
Chain Drive Type ...................... 100 HD continuous loop
Brakes Type ...................... Hydraulic wet disc
Front Tire Size ...................... 14x17.5
Rear Tire Size ...................... 14x17.5
Chain Case Capacity (Each), qts (L) ...................... 22.3 (21.0)
Forward Speed (Low range), mph (kph) ...................... 7.0 (11.3)
Reverse Speed (Low range), mph (kph) ...................... 7.0 (11.3)
Forward Speed (High range), mph (kph) ...................... 12.0 (19.3)
Reverse Speed (High range), mph (kph) ...................... 12.0 (19.3)

Hydraulic System

Hydraulic System Type ...................... Open center
Pump Flow (Std), gpm (Lpm) ...................... 25.0 (95.0)
Pump Flow (Opt), gpm (Lpm) ...................... 41.1 (156.0)
System Pressure, Bar (psi) ...................... 238 (3450)
Hydraulic Capacity, gal (L) ...................... 8.7 (33.0)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 3600 (1633)
Tipping Load, lbs (kg) ...................... 7200 (3272)
Boom Lifting Force, lbs (kg) ...................... 8520 (3865)
Bucket Breakout Force, lbs (kg) ...................... 13904 (6307)

Dimensions and Weight

Wheelbase, in (mm) ...................... 49.9 (1265)
Height (Operator Cab), in (mm) ...................... 86.3 (2190)
Length (w/o Bucket), in (mm) ...................... 122 (3100)
Length (Bucket On Ground), in (mm) ...................... 146 (3705)
Width (w/o Bucket), in (mm) ...................... 78.4 (1990)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 132 (3350)
Dump Angle At Max Height, deg ...................... 48
Dump Height (Fully Raised), in (mm) ...................... 105.6 (2680)
Dump Reach At Max Height, in (mm) ...................... 28 (710)
Rollback Angle At Ground Level, deg ...................... 35
Departure Angle, deg ...................... 29
Bucket Width, in (mm) ...................... 84 (2130)
Ground Clearance, in (mm) ...................... 9.7 (245)
Turning Radius (w/Bucket), in (mm) ...................... 85.7 (2175)
Operating Weight, lbs (kg) ...................... 10000 (4540)