John Deere 333G Track Loader Specifications

The John Deere 333G compact track loader is powered by 186.3 cu.in (3.1L) Yanmar 4TNV94FHT vertical inline four-cylinder turbocharged intercooled diesel engine with a rated power of 100 hp (74.6 kW) at 2500 rpm. The John Deere 333G is equipped with a two-speed transmission, hydraulic wet disc brakes, and rubber tracks with steel inserts. The hydraulic system has a pump with fluid flow rate of 25 gpm (95 lpm). The hydraulic pressure is 3450 psi (238 bar). The track loader has a rated operating capacity of 3700 lbs (1680 kg) and tipping load of 10570 lbs (4800 kg). The boom lifting force is 8520 lbs (3865 kg), and bucket breakout force is 13905 lbs (6307 kg).

Engine Specs

Engine Model ...................... Yanmar 4TNV94FHT
Engine Type ...................... Vertical in-line 4-cycle 4-cylinder turbocharged diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 186.3 (3.06)
Cylinder Bore, in (mm) ...................... 3.70 (94.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged, intercooled
Rated Engine Power, hp (kW) ...................... 100.0 (74.6)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 395.0 (291.3)
Torque Speed, rpm ...................... 1700
Firing Order ...................... 1-3-4-2
Fuel System ...................... Common rail direct injection
Lubrication System ...................... Forced lubrication with trochoid pump
Fuel Tank Capacity, gal (L) ...................... 30.0 (114.0)
Oil Capacity, qts (L) ...................... 10.8 (10.2)
Coolant Capacity, qts (L) ...................... 15.9 (15.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... Hydrostatic with electro-hydraulic controls
Number of Gears ...................... 2 (low/high)
Pump Type ...................... Servo axial-piston
Brakes Type ...................... Hydraulic wet disc
Planetary Gear Case Capacity (Each), qts (L) ...................... 0.95 (0.90)
Forward Speed (Low range), mph (kph) ...................... 5.3 (8.5)
Reverse Speed (Low range), mph (kph) ...................... 5.3 (8.5)
Forward Speed (High range), mph (kph) ...................... 7.8 (12.6)
Reverse Speed (High range), mph (kph) ...................... 7.8 (12.6)

Undercarriage

Tracks Type ...................... Smooth-ride rubber with steel inserts
Track Width (Std), in (mm) ...................... 17.7 (450)
Track Width (Opt), in (mm) ...................... 15.8 (400)
Track Rollers (per Side) ...................... 5 triple-flanged rollers
Track Idlers (per Side) ...................... 2 dual-flanged idlers

Hydraulic System

Hydraulic System Type ...................... Open center
Pump Flow (Std), gpm (Lpm) ...................... 25.0 (95.0)
Pump Flow (Opt), gpm (Lpm) ...................... 41.1 (156.0)
System Pressure, Bar (psi) ...................... 238 (3450)
Hydraulic Capacity, gal (L) ...................... 8.7 (33.0)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 3700 (1680)
Tipping Load, lbs (kg) ...................... 10570 (4800)
Boom Lifting Force, lbs (kg) ...................... 8520 (3865)
Bucket Breakout Force, lbs (kg) ...................... 13905 (6307)

Dimensions and Weight

Length (w/o Bucket), in (mm) ...................... 122 (3100)
Length (Bucket On Ground), in (mm) ...................... 146 (3705)
Height (Operator Cab), in (mm) ...................... 86.7 (2200)
Width (w/o Bucket, Standard Track), in (mm) ...................... 80.7 (2050)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 132 (3350)
Dump Angle At Max Height, deg ...................... 48
Dump Height (Fully Raised), in (mm) ...................... 106.1 (2695)
Dump Reach At Max Height, in (mm) ...................... 28 (710)
Rollback Angle At Ground Level, deg ...................... 35
Departure Angle, deg ...................... 31
Bucket Width, in (mm) ...................... 84 (2130)
Ground Clearance, in (mm) ...................... 9.4 (235)
Turning Radius (w/Bucket), in (mm) ...................... 85.7 (2175)
Operating Weight (Standard Track), lbs (kg) ...................... 12100 (5495)