________________________________________________________________________________

New Holland Boomer 1025 Specs

Boomer 1025 Engine Specifications

Advertised Engine Power, Rated, hp (kW) - 26 (19.4)
Maximum Engine Power, hp (kW) - Same as Advertised
Rated Engine Speed, rpm - 3000
Power Boost, hp (kW) - No boost
Fuel Tank Capacity, gal (L) - 7.1 (26.9)
Engine Make - Shibaura S773L
Number of Cylinders - 3
Displacement, cu in (L) - 69 (1.13)
Engine Bore, in (mm) - 3.03 (77)
Engine Stroke, in (mm) - 3.19 (81)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Naturally aspirated
Fuel System Description - In-Line Pump System
Fuel System Control, Electronic or Mechanical - Mechanical
Fuel Injection to combustion chamber, Direct or Indirect - Indirect
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 40

New Holland Boomer 1025 Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 19.7 (14.7)
PTO Speeds, rpm - 540
PTO operational Type - Independent

Transmission

Manufacturer's Description - Hydrostatic
Transmission Type - 2-Range Hydrostatic
Number of Forward / Reverse Speeds - Infinite, 2 range
Maximum Speed Forward, mph (kph) - 10.3 (16.6)
Creeper Range Available - Yes, hydrostatic
Shuttle (Forward-Reverse) Available - Yes

Boomer 1025 Wheels and Tires

Drive Wheels - 4WD
Steering Configuration - Front Steer
Front Tire Size, 2WD - No 2WD
Front Tire Size - 18x8.5-8 4PR R4
Rear Tire Size or Track Width - 26x12.00-12 4PR R4
Wheelbase, in (mm) - 55.1 (1400)

Axles and Brakes

Final Drive Location and Description - Spur / Inboard
Rear Axle Output End - Flange
Rear Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet disc

New Holland Boomer 1025 Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 5.6 (21.2)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 1

Hitch

3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Position Control
Draft Link Ends Telescopic - No
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 700 (318)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - 1,580 (715)
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Fixed

Attachments

60 inches New Holland 230GM Mower deck

Type - 3-blade mid-mount
Cutting width - 60 inches (152 cm)
Overall width - 73.8 inches (187 cm)
Cut height - 1 to 4 inch (2 to 10 cm)

60 inches New Holland 310GM Mower deck

Type - 3-blade rear-mount with hydraulic lift
Cutting width - 60 inches (152 cm)
Weight - 435 lbs (197 kg)
Cut height - 1 to 4 inch (2 to 10 cm)

New Holland 50CS Snow blower

Type - front-mount dual-stage
Clearing width - 50 inches (127 cm)
Clearing height - 20 inches (50 cm)
Weight - 297 lbs (134 kg)

New Holland 210TL Loader

Weight - 375 lbs (170 kg) (without bucket)
Height (to pin) - 69.6 inches (176 cm)
Clearance, dumped bucket - 49.4 inches (125 cm)
Dump reach - 31.9 inches (81 cm)
Dump angle - 43
Reach at ground - 54.5 inches (138 cm)
Rollback angle - 23
Breakout force (at pin) - 1361 lbs (617 kg)
Breakout force (at 500mm) - 953 lbs (432 kg)
Lift to full height (at pin) - 662 lbs (300 kg)
Lift to full height (at 500mm) - 464 lbs (210 kg)
Lift to 1.5m (at pin) - 676 lbs (306 kg)
Lift to 1.5m (at 500mm) - 492 lbs (223 kg)
Bucket capacity - 0.24 cu yd (0.2 cu m) / 0.27 cu yd (0.2 cu m)
Bucket width - 48 inches (121 cm) / 54 inches (137 cm)

New Holland 910GH Backhoe

Weight - 700 lbs (317 kg)
Bucket width - 9 inches (22 cm), 12 inches (30 cm), 16 inches (40 cm)
2-Foot flat digging depth - 72.5 inches (184 cm)
Reach from pivot - 101 inches (256 cm)
Loading height - 59 inches (149 cm)
Bucket force - 2,614 lbs (1185 kg)
Dipperstick force - 1,520 lbs (689 kg)

New Holland Boomer 1025 Dimensions and Weight

Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 96.3 (2446)
Height to Top of Cab, in (mm) - No Cab
Height to Top of ROPS raised, in (mm) - 72.4 (1840)
Overall Width, with standard wheels, in (mm) - 46.4 (1180)
Weight, 2WD w/ROPS, lb (kg) - No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) - 1,455 (660)
Weight, 2WD w/Cab, lb (kg) - No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - No Cab