________________________________________________________________________________

New Holland T6050 Delta Tractor Specs

Classification - Utility tractor

New Holland T-6050 Engine Specifications

Engine Model - New Holland NEF 667TA
Type - 4 stroke Direct injection
Engine Power, Rated, hp (kW) - 125 (93.8)
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - No boost
Fuel Tank, gal (L) - 67 (254)
Cylinders - 6 (2 valve per cylinder)
Displacement, cu in (L) - 411 (6.7)
Maximum (SAE) - 560.00Nm / 414.40lb-ft
Torque rise - 39 %
Max. torque at - 1400rpm
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged / air-to-air intercooled
Fuel System Description - Rotary-Distributor Type
Fuel System Control - Mechanical
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Exhaust Pipe - Vertical
Cooling System Fan Drive Type - Viscous
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120

NH T6050 Tractor Transmission

Description - 16F / 16R ElectroShift
Transmission Type - 4 range Powershift
Gearbox - Synchro Command
Forward / Reverse Speeds - 16F / 16R
Maximum Speed Forward, mph (kph) - 18.90 (30.30) 2WD / 23.79 (38.14) FWD
Creeper Range - Yes
Shuttle (Forward-Reverse) - Yes
Max first gear - 2.00km/h / 1.24mph
Maximum speed - 40.00km/h / 24.85mph
Creeper - 0.20km/h / 0.12mph

Optional Transmission

Model - Dual Command
Type - 2-speed PowerShift
Gears - with creeper 48x48

New Holland T6050 Tractor PTO

PTO Horsepower, hp (kW) - 105 (78.3)
Power Take Off Speeds, rpm - 540
PTO Type - Independent
Engine at PTO speed - 1969/1546/2120rpm
Front side - Optional
Speed front - 1000rpm

Wheels and Steering

Drive Wheels - 2WD / 4WD
Steering - Front Steer
Steering system - Hydrostatic
Steering angle - 55 degree

Rear Axle

Final Drive - Planetary / Inboard
Axle Output End - Flange / bar Optional
Axle Bar Diameter, in (mm) - 3.6 (92)
Suspended Front Axle - No

Brakes

Brake Type - Wet disc

New Holland T-6050 Hydraulic System

Hydraulic System Type - Load-sensing open centre
Main Hydraulic Pump Type - Fixed displacement
Standard Pump Flow, gpm (Lpm) - 16.6 (63)
Optional Pump Flow, gpm (Lpm) - No option
Control type - Mechanical draft control (MDC)
Standard Remote Valves - 2

3-Point Hitch Features

3-Point Hitch Category - Category 2
Optional Hitch Category - No option
Draft Sensing or Lift Control - Mechanical lower link
Draft Link Ends Adjustable - Yes

NH T6050 3-Point Hitch Lift Capacity

Standard Lift Capacity 24 Inches behind pin, lb (kg) - 7,509 (3406)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 8,813 (3997)

Drawbar

Drawbar Description - Swinging

Wheelbase

Wheelbase, 2WD, in (mm) - 104.4 (2652)
Wheelbase, 4WD, in (mm) - 104.7 (2661)

Tire Size

Front Tire Size, 2WD - 10.00 x 16
Front Tire Size Width, 4WD - 14.9R28
Rear Tire Size Width - 18.4R38

Dimensions and Weight

Length - 4,532mm / 178Inch
Width - 1,913mm / 75Inch
Heigth - 2,770mm / 109Inch
Operating weight - 5,030kg / 11,066Lbs
Total weight - 9,000kg / 19,800Lbs