________________________________________________________________________________

New Holland Workmaster 40 Specs

Workmaster 40 Engine Specifications

Advertised Engine Power, Rated, hp (kW) - 38 (28.3)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2800
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 7.4 (28)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Engine Make - LS Mtron
Engine Model - L3AL
Number of Cylinders - 3
Displacement, cu in (L) - 122 (2.0)
Engine Bore, in (mm) - 3.543 (90)
Engine Stroke, in (mm) - 4.134 (105)
Block Design, Replaceable Liners - Cast in block
Aspiration, Turbocharged or Naturally Aspirated - Naturally aspirated
Fuel System Control, Electronic or Mechanical - Mechanical
Fuel Injection to combustion chamber, Direct or Indirect - Indirect
Emission Level, US EPA Tier - Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - No
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 50

Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 33.4 (24.9) Gear / 31.2 (23.3) HST
PTO Speeds, rpm - 540
PTO operational Type (Independent; Live; Continuous) - Independent

New Holland Workmaster 40 Transmission

Manufacturer's Description - 12x12 Gear w/ Synchronized Shuttle
Transmission Type - Synchronized shuttle; gears/ranges non-synch
Number of Forward / Reverse Speeds - 12F / 12R
Maximum Speed Forward, mph (kph) - 14.2 (22.9)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Standard

Manufacturer's Description - 3-Range Hydrostatic
Transmission Type - Hydrostatic, 3 ranges
Number of Forward / Reverse Speeds - Infinite, 3 ranges

Workmaster 40 Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 66 (1674)
Front Tire Size, 2WD - No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track - 25x8.5-14, R4
Rear Tire Size or Track Width - 43x16.00-20, R4

Axles and Brakes

Final Drive Location and Description - Planetary
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet disc

New Holland Workmaster 40 Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Dual gear-type pumps
Implement Pump Flow, gpm (Lpm) - 8.2 (31)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - np

3-Point Hitch

3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Position control
Draft Link Ends Telescopic - No
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 1,433 (650)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - 1,808 (820)
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Extendable

Workmaster 40 Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 119 (3017)
Height to Top of Cab, in (mm) - No Cab
Height to Top of ROPS raised, in (mm) - 87.7 (2227)
Overall Width, with standard wheels or tracks, in (mm) - 66.5 (1689)
Weight, 2WD w/ROPS, lb (kg) - No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) - 3,067 (1391) Gear; 3,133 (1421) HST
Weight, 2WD w/Cab, lb (kg) - No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - No cab