________________________________________________________________________________

New Holland TD4040 Specs

TD4040 Engine Specifications

Engine Make - New Holland FPT
Engine Model - F5C
Number of Cylinders - 4
Displacement, cu in (L) - 195 (3.2)
Engine Bore, in (mm) - 3.90 (99)
Engine Stroke, in (mm) - 4.095 (104)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged and Intercooled
Fuel System Description - Rotary-Distributor Type
Fuel System Control, Electronic or Mechanical - Mechanical
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - No
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120
Advertised Engine Power, Rated, hp (kW) - 87 (64)
Maximum Engine Power, hp (kW) - Same as Advertised
Rated Engine Speed, rpm - 2300
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 21.1 (80)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF

PTO

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 76 (56.7)
PTO Speeds, rpm - 540 std; 540/540E opt.
PTO operational Type (Independent; Live; Continuous) - Independent

New Holland TD4040 Basic Transmission

Manufacturer's Description - 12 x 12 w/Mechanical Shuttle
Transmission Type - 4 Synchronized Speeds in 3 Ranges
Number of Forward / Reverse Speeds - 12F / 12R
Maximum Speed Forward, mph (kph) - 21.8 (35.1)
Creeper Range Available - Yes, see optional
Shuttle (Forward-Reverse) Available - Standard

Optional Transmission

Manufacturer's Description - 20 x 12 w/Creeper
Transmission Type - Includes 6 speeds below 1 mph
Number of Forward / Reverse Speeds - 20F / 12R

New Holland TD4040 Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 81.2 (2063)
Front Tire Size, 2WD - No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track - 280/70 R18, R1W
Rear Tire Size or Track Width - 380/70 R24, R1W

NH TD4040 Axles and Brakes

Final Drive Location and Description - Planetary / Inboard
Rear Axle Output End, Flange or Bar - Flange
Rear Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet Disc

New Holland TD4040 Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 11.9 (45)
Optional Pump Flow, gpm (Lpm) - 16.1 (61)
Number of Standard Remote Valves - 2 std; 3rd opt

3-Point Hitch

3-Point Hitch Category - Category 2
Optional Hitch Category - No option
Draft Sensing or Lift Control - Draft sensing, lower link
Draft Link Ends Telescopic - No; Fixed
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 3,924 (1780)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - 6,613 (3000)
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Swinging

NH TD4040 Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 155.1 (3940)
Height to Top of Cab, in (mm) - No cab
Height to Top of ROPS raised, in (mm) - np
Overall Width, with standard wheels or tracks, in (mm) - 58.6 (1488) Minimum
Weight, 2WD w/ROPS, lb (kg) - No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) - 5,886 (2670)
Weight, 2WD w/Cab, lb (kg) - No 2WD, no cab
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - No cab
Weight, Total allowable, w/maximum ballast, lb (kg) - 7,407 (3360)