________________________________________________________________________________

New Holland Boomer 2035 Specs

Boomer 2035 Engine Specifications

Advertised Engine Power, Rated, hp (kW) - 35 (26.1)
Maximum Engine Power, hp (kW) - Same as Advertised
Rated Engine Speed, rpm - 2600
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 7.3 (27.6)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Engine Model - Shibaura N843L
Number of Cylinders - 3
Displacement, cu in (L) - 101.4 (1.66)
Engine Bore, in (mm) - 3.31 (84)
Engine Stroke, in (mm) - 3.94 (100)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Naturally aspirated
Fuel System Description - In-Line Pump System
Fuel System Control, Electronic or Mechanical - Mechanical
Fuel Injection to combustion chamber, Direct or Indirect - Indirect
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 40

New Holland Boomer 2035 Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 28.9 (21.6)
PTO Speeds, rpm - 540
PTO operational Type - Live

Transmission

Manufacturer's Description - 3 Range HST
Transmission Type - Hydrostatic
Number of Forward / Reverse Speeds - Infinite, 3 range
Maximum Speed Forward, mph (kph) - 16.59 (26.7)
Creeper Range Available - Yes, hydrostatic
Shuttle (Forward-Reverse) Available - Yes

Boomer 2035 Wheels and Tires

Drive Wheels - 4WD
Steering Configuration - Front Steer std; SuperSteer opt
Wheelbase, MFD/4WD, in (mm) - 63 (1600) std; 72 (1829) SuperSteer
Front Tire Size, MFD/4WD - 7-14 6PR R1
Rear Tire Size - 11.2-24 4PR R1

Axles and Brakes

Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet Disc

New Holland Boomer 2035 Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 12.3 (46.5)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - None Std

3-Point Hitch

3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Position Control
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 1,635 (743)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Swinging, extendable

New Holland Boomer 2035 Dimensions and Weight

Length, MFD/4WD, incl. Hitch/Drawbar, in (mm) - 106 (2697) std; 115 (2928) Super Steer
Height to Top of ROPS raised, in (mm) - 87.8 (2230)
Overall Width, with standard wheels, in (mm) - 59.5 (1511)
Weight, MFD/4WD w/ROPS, lb (kg) - 2,492 (1130.5)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - No Cab

Attachments

New Holland 914A-72 Mower deck

Type - 3-blade mid-mount
Cutting width - 72 inches (182 cm)
Overall width - 85.5 inches (217 cm) (side discharge) / 62.4 inches (158 cm) (rear discharge)
Cut height - 1.5 to 4 inch (3 to 10 cm)

New Holland 240TL Loader

Weight - 610 lbs (276 kg) (without bucket)
Height (to pin) - 98.4 inches (249 cm)
Clearance, dumped bucket - 75.3 inches (191 cm)
Dump reach - 31 inches (78 cm)
Dump angle - 39
Reach at ground - 70.9 inches (180 cm)
Rollback angle - 32
Breakout force (at pin) - 2,700 lbs (1224 kg)
Breakout force (at 500mm) - 1,900 lbs (861 kg)
Lift to full height (at pin) - 1250 lbs (567 kg)
Lift to full height (at 500mm) - 875 lbs (396 kg)
Lift to 1.5m (at pin) - 1,596 lbs (723 kg)
Lift to 1.5m (at 500mm) - 1,183 lbs (536 kg)
Bucket capacity - 0.471,0.534 cu yd (0.4 cu m)
Bucket width - 60 inches (152 cm) / 68 inches (172 cm)

New Holland 930GH Backhoe

Weight - 980 lbs (444 kg)
Bucket width - 9 inches (22 cm) / 12 inches (30 cm)
Bucket width - 16 inches (40 cm) / 18 inches (45 cm)
Bucket width - 24 inches (60 cm) / 36 inches (91 cm)
2-Foot flat digging depth - 102 inches (259 cm)
Reach from pivot - 134 inches (340 cm)
Loading height - 80 inches (203 cm)
Bucket force - 4,100 lbs (1859 kg)
Dipperstick force - 2,130 lbs (966 kg)