________________________________________________________________________________

New Holland Boomer 4060 Specs

Boomer 4060 Engine Specifications

Engine Model - Shibaura ISM-N844L-T
Number of Cylinders - 4
Displacement, cu in (L) - 135.2 (2.2)
Engine Bore, in (mm) - 3.31 (84)
Engine Stroke, in (mm) - 3.94 (100)
Advertised Engine Power, Rated, hp (kW) - 60 (44.7)
Maximum Engine Power, hp (kW) - Same as Advertised
Rated Engine Speed, rpm - 2800
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 13.5 (51.1)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged
Fuel System Description - In-Line Pump System
Fuel System Control, Electronic or Mechanical - Mechanical
Fuel Injection to combustion chamber, Direct or Indirect - Indirect
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 55

New Holland Boomer 4060 Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 50.5 (37.7) / 49.4 (36.8)
PTO Speeds, rpm - 540
PTO operational Type - Independent

Basic Transmission

Manufacturer's Description - 12x12 Sync Shuttle Shift
Transmission Type - Synchronized
Number of Forward / Reverse Speeds - 12F / 12R
Maximum Speed Forward, mph (kph) - 17.01 (27.37)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Std

Optional Transmission

Manufacturer's Description - Electro-hydraulic Shuttle Shift
Transmission Type - Synchronized
Number of Forward / Reverse Speeds - 12F / 12R

Boomer 4060 Wheels and Tires

Drive Wheels - 2WD / 4WD
Steering Configuration - Front Steer
Front Tire Size - 9.5x16
Rear Tire Size - 14.9x24
Wheelbase, MFD/4WD, in (mm) - 74.8 (1900)

Axles and Brakes

Final Drive Location and Description - Spur / Inboard
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet disc

New Holland Boomer 4060 Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 12.02 (45.49)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 0

Boomer 4060 Hitch

3-Point Hitch Category - Category 1 / 2
Optional Hitch Category - No option
Draft Sensing or Lift Control - Top link sensing
Draft Link Ends Telescopic - Std
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 3,465 (1572)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - 4,355 (1975)
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Swinging, extendable

Dimensions and Weight

Length, MFD/4WD, incl. Hitch/Drawbar, in (mm) - 137.3 (3487)
Height to Top of ROPS raised, in (mm) - 89.8 (2282)
Overall Width, with standard wheels, in (mm) - 64.4 (1635)
Weight, MFD/4WD w/ROPS, lb (kg) - 3,377 (1532)

New Holland 270TL Loader

Weight - 820 lbs (371 kg) (without bucket)
Height (to pin) - 112.3 inches (285 cm)
Clearance, dumped bucket - 85.2 inches (216 cm)
Dump reach - 32 inches (81 cm)
Dump angle - 49
Rollback angle - 39
Breakout force (at pin) - 5,000 lbs (2268 kg)
Breakout force (at 500mm) - 3,114 lbs (1412 kg)
Lift to full height (at pin) - 2,500 lbs (1134 kg)
Lift to full height (at 500mm) - 1,830 lbs (830 kg)
Lift to 1.5m (at pin) - 3,500 lbs (1587 kg)
Lift to 1.5m (at 500mm) - 2,213 lbs (1003 kg)
Bucket capacity - 0.572 cu yd (0.4 cu m)
Bucket width - 72 inches (182 cm)

New Holland 940GH Backhoe

Weight - 1,100 lbs (498 kg)
Bucket width - 9 inches (22 cm) / 12 inches (30 cm)
Bucket width - 16 inches (40 cm) / 18 inches (45 cm)
Bucket width - 24 inches (60 cm) / 36 inches (91 cm)
2-Foot flat digging depth - 113.5 inches (288 cm)
Reach from pivot - 149 inches (378 cm)
Loading height - 91 inches (231 cm)
Bucket force - 4,100 lbs (1859 kg)
Dipperstick force - 2,670 lbs (1211 kg)