________________________________________________________________________________

New Holland T4.115 Specs

NH T4.115 Engine Specifications

Engine Make - New Holland FPT
Engine Model - F5D
Number of Cylinders - 4
Displacement, cu in (L) - 207 (3.4)
Engine Bore, in (mm) - 3.90 (99)
Engine Stroke, in (mm) - 4.33 (110)
Advertised Engine Power, Rated, hp (kW) - 114 (85)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2300
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 30.3 (115)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged, air-to-air aftercooled
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4A (Interim)
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - Cooled EGR
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - DPF standard
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120

New Holland T4.115 Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 98 (73)
PTO Speeds, rpm - 540/540E std; 540/1000 opt.
PTO operational Type (Independent; Live; Continuous) - Independent

Basic Transmission

Manufacturer's Description - 12x12 Power Shuttle
Transmission Type - Power Shuttle, Synchronized
Number of Forward / Reverse Speeds - 12F/ 12R
Maximum Speed Forward, mph (kph) - 19 (30) std; 25 (40) opt.
Creeper Range Available - Yes, see optional
Shuttle (Forward-Reverse) Available - Standard

Optional Transmission

Manufacturer's Description - 20x20 Power Shuttle with Creeper
Transmission Type - 4 Synch gears, 3 Ranges + Creeper
Number of Forward / Reverse Speeds - 20F/20R

Manufacturer's Description - 24x24 Dual Command
Transmission Type - Power Shuttle, Creeper optional
Number of Forward / Reverse Speeds - 24F/24R; 40F/40R opt.

NH T4.115 Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 2WD / 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Front Tire Size, 2WD - 10.00-16, 8 ply, F2
Front Tire Size orTrack Width, MFD/4WD or Track - 12.4 R24 R1W
Rear Tire Size or Track Width - 18.4 R30 R1W
Wheelbase, 2WD, in (mm) - 90.2 (2293)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 87.9 (2235)

Axles and Brakes

Final Drive Location and Description - Inboard planetary
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet disc

New Holland T4.115 Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Tandem gear
Implement Pump Flow, gpm (Lpm) - 16.9 (64)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 1 std; 2nd opt; 3rd dealer install

3-Point Hitch

3-Point Hitch Category - Category 2
Draft Sensing or Lift Control - Lower link sensing
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 5,620 (2549)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 7,351 (3334)
Drawbar Description - Swinging, Category 2

NH T4.115 Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - 161 (4094)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 158 (4036)
Height to Top of Cab, in (mm) - 102.1 (2594)
Height to Top of ROPS raised, in (mm) - 106.5 (2706)
Overall Width, with standard wheels or tracks, in (mm) - 75.7 (1923) across fenders
Weight, 2WD w/ROPS, lb (kg) - 6,768 (3070)
Weight, MFD/4WD w/ROPS, lb (kg) - 7,451 (3380)
Weight, 2WD w/Cab, lb (kg) - 7,253 (3290)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 7,936 (3600)
Weight, Total allowable, w/maximum ballast, lb (kg) - 8,333 (3780)