________________________________________________________________________________

New Holland T6020 Delta Tractor Specs

Classification - Utility tractor

New Holland T-6020 Engine Specifications

Engine Model - New Holland NEF 445TA
Type - 4 stroke Direct injection
Engine Power, Rated, hp (kW) - 110 (82)
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - No boost
Fuel Tank, gal (L) - 46.5 (176)
Cylinders - 4 (2 valve per cylinder)
Displacement, cu in (L) - 274 (4.5)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged / air-to-air intercooled

Fuel System

Fuel System Description - Rotary-Distributor Type
Fuel System Control - Mechanical
Fuel Injection to combustion chamber - Direct

Emission and Exhaust Treatment

Emission Level - Tier 3
Exhaust Pipe - Vertical

Cooling System

Engine cooled - Water cooled
Intercooled - Air cooled
Fan Drive Type - Viscous

Electrical System

System Rating, Volts - 12
Alternator Rating, Amps - 120

NH T6020 TractorTransmission

Description - 24F / 24 Dual Command
Transmission Type - Mechanical with 1 Powershift
Gearbox - Synchro Command
Forward / Reverse Speeds - 24F / 24R
Maximum Speed Forward, mph (kph) - 19.02 (30.50) 2WD / 23.17 (37.16) FWD
Creeper Range - Yes
Shuttle (Forward-Reverse) - No

Optional Transmission one

Description - 16F / 16R ElectroShift
Transmission Type - Mechanical with 1 Powershift
Forward / Reverse Speeds - 16F / 16R

Optional Transmission two

Model - Dual Command
Type - 2-speed PowerShift
Gears - with creeper 48x48
Forward gears - 24
Reverse gears - 24

New Holland T6020 PTO

Power Take Off Horsepower, hp (kW) - 90 (67.1)
PTO Speeds, rpm - 540 / 1000
PTO Type - Independent

Wheels

Drive Wheels - 2WD / 4WD
Steering - Front Steer
Steering System - hydrostatic

Rear Axle

Final Drive - Planetary / Inboard
Axle Output End - Flange std; Bar opt.
Axle Bar Diameter, in (mm) - 3.6 (92)

Brakes

Brake Type - Wet disc

New Holland T-6020 Tractor Hydraulic System

Hydraulic System Type - Load-sensing open centre
Main Hydraulic Pump Type - Fixed displacement
Standard Pump Flow, gpm (Lpm) - 16.6 (63)
Optional Pump Flow, gpm (Lpm) No option
Hydraulic pressure - 190.00Bar / 19.00Mpa
Control type - Mechanical draft control (MDC)
Standard Remote Valves - 2

3-Point Hitch Features

3-Point Hitch Category - Category 2
Optional Hitch Category - No option
Draft Sensing or Lift Control - Mechanical lower link
Draft Link Ends Adjustable - Yes

3-Point Hitch Lift Capacity

Standard Lift Capacity 24 Inches behind pin, lb (kg) - 7,509 (3406)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 8,813 (3997)

Drawbar

Drawbar Description - Swinging

NH T6020 Wheelbase

Wheelbase, 2WD, in (mm) - 93.3 (2370)
Wheelbase, 4WD, in (mm) - 94.9 (2410)

Tire Size

Front Tire Size, 2WD - 7.50 x 16
Front Tire Size Width, 4WD - 14.9R28
Rear Tire Size Width - 16.9R38

Dimensions

Length - 4,292mm / 169Inch
Width - 1,873mm / 74Inch
Heigth - 2,726mm / 107Inch
Cab Height dimensions - 2,726mm / 107Inch
Front axle Ground clearance - 427mm / 17Inch