________________________________________________________________________________

New Holland T7030 Tractor Specs

Classification - Row Crop tractor

New Holland T7030 Engine Specifications

Engine Model - New Holland 667TA/EBN
Engine Power, Rated, hp (kW) - 235 (173)
Type - 4 stroke Direct injection
Maximum Engine Power, hp (kW) - 200 (149)
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - 35 (26)
Fuel Tank, gal (L) - 106.9 (405)
Cylinders - 6
Displacement, cu in (L) - 411 (6.7)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged and air to air intercooler
Fuel System Description - High Pressure Common Rail
Fuel System Control - Electronic
Fuel - diesel
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Exhaust Pipe - Vertical
Cooling System Fan Drive Type - Vistronic
Engine cooled - water cooled
Intercooled - Air cooled
Compression ratio - 16.5:1
Electrical System Rating, Volts - 12
Alternator Rating, Amps - Std 150; Opt 200
Batteries Power - 150Ah
Starter Motor output - 4.20Kw / 5.63Hp

New Holland T-7030 Transmission

Description - 18 x 6 Power Command (25mph)
Transmission Type - Full Powershift with Power Shuttle
Gearbox - Power Command
Reversing gear - Hydraulic
Powertrain - 4 Wheel Drive
Forward / Reverse Speeds - 18F / 6R
Maximum Speed Forward, mph (kph) - 24.8 (40.0)
Creeper Range - Yes
Shuttle (Forward-Reverse) - Yes

Optional Transmission

Description - 19 x 6 Power Command (Economy)
Transmission Type - Full Powershift with Power Shuttle
Forward / Reverse Speeds - 19F / 6R

NH T7030 Tractor PTO

PTO Horsepower, hp (kW) - 135 (100.7)
Power Take Off Speeds, rpm - 540 / 1000
PTO Type - Independent

Wheels

Drive Wheels - 4WD
Steering - Front Steer std; SuperSteer opt

Rear Axle

Final Drive - Planetary / Inboard
Axle Output End - Bar
Axle Bar Diameter, in (mm) - 4.125 (104.8)
Suspended Front Axle - Yes, Opt.

Brakes

Brake Type - Differential hydraulic wet disc

New Holland T-7030 Tractor Hydraulic System

Hydraulic System Type - Closed Center Load Sensing
Main Hydraulic Pump Type - Variable Displacement
Standard Pump Flow, gpm (Lpm) - 32 (120)
Optional Pump Flow, gpm (Lpm) - 39.6 (150)
Control type - Electronic draft control
Standard Remote Valves - 3 or 4 Mechanical

Steering system

Steering - Hydrostatic
Steering angle - 55 degree
Turning radius Outside of tire - 6,250mm / 246Inch
Maximum hydraulic flow - 66.5L/min

NH T7030 3-Point Hitch Features

3-Point Hitch Category - Category 2 / 3N
Draft Sensing or Lift Control - Electronic, lower link
Draft Link Ends Adjustable - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 12,787,(5800)

Drawbar

Drawbar Description - Swinging

Wheelbase

Wheelbase, 4WD, in (mm) - 113.5 (2884) std; 117.2 (2977) SuperSteer

Tire Size

Front Tire Size Width, 4WD - 16.9R30
Rear Tire Size Width - 20.8R42

Dimensions

Length - 4,816mm / 190Inch
Width - 2,334mm / 92Inch
Heigth - 3,165mm / 125Inch