________________________________________________________________________________

New Holland T7050 AutoCommand CVT Tractor Specs

New Holland T7050 Engine Specifications

Engine Model - New Holland 667TA/EBC
Engine Power, Rated, hp (kW) - 194 (144.7)
Maximum Engine Power, hp (kW) - 229 (171)
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - 35 (26)
Fuel Tank, gal (L) - 108.8 (412)
Cylinders - 6
Displacement, cu in (L) - 411 (6.7)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged and air to air intercooler

Fuel System

Fuel System Description - High Pressure Common Rail
Fuel System Control - Electronic
Fuel Injection to combustion chamber - Direct

Emission and Exhaust Treatment

Emission Level - Tier 3
Exhaust Pipe - Vertical

Cooling System

Fan Drive Type - Vistronic

Electrical System

System Rating, Volts - 12
Alternator Rating, Amps - Std 150; Opt 200

NH T7050 Transmission

Description - AutoCommand CVT (25 mph)
Transmission Type - Hydrostatic plus gear, continouosly variable
Forward / Reverse Speeds - Infinite, 3F / 1R ranges
Maximum Speed Forward, mph (kph) - 24.8 (40.0)
Creeper Range - Yes
Shuttle (Forward-Reverse) - Yes

New Holland T-7050 Optional Transmission

Description - AutoCommand CVT Economy
Transmission Type - Hydrostatic plus gear, continouosly variable
Forward / Reverse Speeds - Infinite, 4F / 2R ranges

Description - AutoCommand CVT (31 mph)
Transmission Type - Hydrostatic plus gear, continouosly variable
Forward / Reverse Speeds - Infinite, 4F / 2R ranges

New Holland T7050 Tractor PTO

PTO Horsepower, hp (kW) - 165 (123)
Power Take Off Speeds, rpm - 1000 / 1000E / 540E
PTO Type - Independent

Wheel

Drive Wheels - 4WD
Steering - Front Steer std; SuperSteer opt

Rear Axle

Final Drive - Planetary / Inboard
Axle Output End - Bar
Axle Bar Diameter, in (mm) - 4.13 (105)
Suspended Front Axle - Yes, Opt.

Brakes

Brake Type - Wet disc

New Holland T-7050 Hydraulic System

Hydraulic System Type - Closed Center Load Sensing
Main Hydraulic Pump Type - Variable Displacement
Standard Pump Flow, gpm (Lpm) - 32 (120)
Optional Pump Flow, gpm (Lpm) - 39.6 (150)
Standard Remote Valves - 3 Electronic

NH T7050 Tractor 3-Point Hitch Features

3-Point Hitch Category - Category 2 / 3
Draft Sensing or Lift Control - Electronic, lower link
Draft Link Ends Adjustable - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 15,873 (7200)

Drawbar

Drawbar Description - Swinging

Wheelbase

Wheelbase, 4WD, in (mm) - 113.5 (2884) std; 117.2 (2977) SuperSteer

Tire Size

Front Tire Size Width, 4WD - 16.9R30
Rear Tire Size Width - 18.4R42