________________________________________________________________________________

New Holland T9.480 Specs

New Holland T9.480 Engine Specifications

Engine Make - New Holland FPT
Engine Model - Cursor 13 SST
Number of Cylinders - 6
Displacement, cu in (L) - 787 (12.9)
Engine Bore, in (mm) - 5.31 (135)
Engine Stroke, in (mm) - 5.91 (150)
Advertised Engine Power, Rated, hp (kW) - 420 (309)
Maximum Engine Power, hp (kW) - 462 (340)
Rated Engine Speed, rpm - 2100
Power Boost, hp (kW) - 42 (31)
Fuel Tank capacity, gal (L) - 230 (871)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - 42 (159)
Block Design, Replaceable Liners - Wet liners
Aspiration, Turbocharged or Naturally Aspirated - Wastegate Turbocharged, Aftercooled
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - HI-eSCR w/ DEF
Exhaust Gas Recirculation (EGR) - No
Cleanup Catalyst (CUC) - CUC standard
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - No
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - Viscous
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 200

NH T9.480 Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 355 (265)
PTO Speeds, rpm - 1000
PTO operational Type (Independent; Live; Continuous) - Independent

Transmission

Manufacturer's Description - 16 x 2 Ultra Command Full Powershift
Transmission Type - Full powershift
Number of Forward / Reverse Speeds - 16F / 2R
Maximum Speed Forward, mph (kph) - 25 (40)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Yes

New Holland T9.480 Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Frame Articulated
Front Tire Size, 2WD - No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track - 710/70 R42 Duals
Rear Tire Size or Track Width - 710/70 R42 Duals
Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 148 (3759)

Axles and Brakes

Final Drive Location and Description - Inboard Planetary
Axle Output End, Flange or Bar - Bar
Axle Bar Diameter, in (mm) - 5.0 (127)
Suspended Front Axle Available - No
Service Brake Type - Wet disc

NH T9.480 Hydraulic System

Hydraulic System Type - Closed Center Load Sensing (CCLS)
Main Hydraulic Pump Type - Single std; MegaFlow opt.
Implement Pump Flow, gpm (Lpm) - 42 (159)
Optional Pump Flow, gpm (Lpm) - 57 (216); 113 (428)
Number of Standard Remote Valves - 4 std; up to 8 total

3-Point Hitch

3-Point Hitch Category - Category 4N Quick Hitch
Optional Hitch Category - Category 3 Quick-Hitch
Draft Sensing or Lift Control - Three Position, Lift, Hold, Lower
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 20,000 (9072)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Category 4, Swinging

New Holland T9.480 Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 291 (7393)
Height to Top of Cab, in (mm) - 151.3 (3843)
Height to Top of ROPS raised, in (mm) - No open ROPS
Overall Width, with standard wheels or tracks, in (mm) - 120 (3048) bar axles
Weight, 2WD w/ROPS, lb (kg) - No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) - No open ROPS
Weight, 2WD w/Cab, lb (kg) - No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 36,048 (16351)
Weight, Total allowable, w/maximum ballast, lb (kg) - 49,500 (22453)