________________________________________________________________________________

New Holland Workmaster 50 Specs

Workmaster 50 Engine Specifications

Advertised Engine Power, Rated, hp (kW) - 53 (39.5 )
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2600
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 13.8 (52.2)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Engine Model - New Holland FPT R753
Number of Cylinders - 3
Displacement, cu in (L) - 136 (2.23)
Engine Bore, in (mm) - 3.70 (94)
Engine Stroke, in (mm) - 4.21 (107)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Wastegate Turbocharger with Intercooler
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - Internal EGR
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - Particulate Matter Catalyst
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 75

Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 45 (34)
PTO Speeds, rpm - 540 std; 540/540E opt.
PTO operational Type (Independent; Live; Continuous) - Independent

New Holland Workmaster 50 Transmission

Manufacturer's Description - 8Fx8R Synchro mesh
Transmission Type - Synchro-shuttle
Number of Forward / Reverse Speeds - 8F / 8R
Maximum Speed Forward, mph (kph) - np
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Standard

Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 2WD / 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase, 2WD, in (mm) - 96.4 (2450)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 97.6 (2478)
Rear Tire Size or Track Width - 13.6-28, R1

Workmaster 50 Axles and Brakes

Final Drive Location and Description - Planetary
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet disc

New Holland Workmaster 50 Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Dual gear
Implement Pump Flow, gpm (Lpm) - 12 (45)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 1 std.; 2nd opt.

3-Point Hitch

3-Point Hitch Category - Category 2 / 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Draft Control
Draft Link Ends Telescopic - Standard
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 2,701 (1225) OECD
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Optional Lift Capacity at lift pin, lb (kg) - No option

Workmaster 50 Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - 129.5 (3290)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 134 (3404)
Height to Top of Cab, in (mm) - No cab
Height to Top of ROPS raised, in (mm) - 97.6 (2479)
Overall Width, with standard wheels or tracks, in (mm) - 77.5 (1970)
Weight, MFD/4WD w/ROPS, lb (kg) - 4,100 (1860)
Weight, 2WD w/Cab, lb (kg) - No cab
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - No cab