Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

New Holland Workmaster 75 Specs

Workmaster 75 Engine Specifications

Engine Model - New Holland FPT F5C
Engine Power, Rated, hp (kW) - 75 (56)
Rated Engine Speed, rpm - 2500
Power Boost, hp (kW) - No boost
Fuel Tank, gal (L) - 16.0 (60)
Cylinders - 4
Displacement, cu in (L) - 195 (3.2)
Engine Bore, in (mm) - 3.90 (99)
Engine Stroke, in (mm) - 4.095 (104)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged
Fuel System Description - Rotary-Distributor
Fuel System Control - Mechanical
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Exhaust Pipe - Vertical
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 65

New Holland Workmaster 75 Transmission

Description - 8x2 Partially Synchronized
Transmission Type - Gear
Forward / Reverse Speeds - 8F x 2R
Maximum Speed Forward, mph (kph) - 19.0 (30.5)
Creeper Range - No
Shuttle (Forward-Reverse) - No

New Holland Workmaster 75 Power Take-Off

PTO Horsepower, hp (kW) - 66 (49)
PTO Speeds, rpm - 540
PTO Type - Independent

Workmaster 75 Wheels and Tires

Drive Wheels - 2WD / 4WD
Steering - Front Steer
Wheelbase, 2WD, in (mm) - 84.6 (2150)
Wheelbase, 4WD, in (mm) - 87.0 (2210)
Front Tire Size, 2WD - 7.5x16 6PR F2
Front Tire Size Width, 4WD - 11.2x24 6PR R1
Rear Tire Size Width - 16.9x30 6PR R1

Axles and Brakes

Final Drive - Inboard/ Planetary
Axle Output End - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle - No
Brake Type - Wet Disc

Workmaster 75 Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Fixed Displacement Gear Pump
Standard Pump Flow, gpm (Lpm) - 10.4 (39.3)
Optional Pump Flow, gpm (Lpm) - No option
Standard Remote Valves - 0

3-Point Hitch

3-Point Hitch Category - Category 2 / 1
Optional Hitch Category - Category 1
Draft Sensing or Lift Control - Top Link - Mechanical
Draft Link Ends Adjustable - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 2,429 (1102)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No Option
Standard Lift Capacity at lift pin, lb (kg) - 3,276 (1486)
Optional Lift Capacity at lift pin, lb (kg) - No Option
Drawbar Description - Swinging

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________