New Holland L150 Skid Steer Specifications

The New Holland L150 skid steer loader is powered by 91.3 cubic inches (1.5 L) Shibaura N843H three-cylinder indirect injection liquid-cooled diesel engine with a rated power of 38 hp (28.3 kW) at 3200 rpm. The New Holland L150 is equipped with a single-speed hydrostatic transmission, 50/80 HD roller chains, and 10x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 11.6 gpm (44 lpm). The hydraulic pressure is 2500 psi (172 bar). The skid steer loader has a rated operating capacity of 1350 lbs (612 kg) and tipping load of 2700 lbs (1225 kg). The lift height is 115.8 inches (2940 mm) to hinge pin, and dump height is 92.2 inches (2340 mm).

Engine Specs

Engine Model ...................... Shibaura N843H
Engine Type ...................... 4-cycle vertical liquid-cooled diesel
Number of Cylinders ...................... Three
Displacement, cu.in (L) ...................... 91.3 (1.496)
Cylinder Bore, in (mm) ...................... 3.32 (84.0)
Piston Stroke, in (mm) ...................... 3.56 (90.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 38.0 (28.3)
Rated Engine Speed, rpm ...................... 3200
Maximum Torque, Nm (lb-ft) ...................... 99.1 (73.1)
Torque Speed, rpm ...................... 2000
Fast Idle Speed, rpm ...................... 3300-3450
Low Idle Speed, rpm ...................... 1000-1050
Compression Ratio ...................... 22:1
Firing Order ...................... 1-2-3
Fuel System ...................... Indirect injection
Valve Clearance, in (mm) ...................... 0.008 (0.20)
Fuel Tank Capacity, gal (L) ...................... 8.8 (33.1)
Oil Capacity, qts (L) ...................... 5.8 (5.5)
Coolant Capacity, qts (L) ...................... 9.8 (9.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40

Drive Train

Drive System Type ...................... Hydrostatic, chain drive
Number of Gears ...................... Single
Chain Drive Type ...................... 50/80 HD roller chains
Drive Motor Type ...................... Axial piston
Front Tire Size (Std) ...................... 10x16.5
Rear Tire Size (Opt) ...................... 10x16.5
Chaincase Capacity, qts (L) ...................... 6.0 (5.7)
Forward Speed, mph (kph) ...................... 7.3 (11.8)
Reverse Speed, mph (kph) ...................... 7.3 (11.8)

Hydraulic System

Hydraulic System Type ...................... Open Center
Hydraulic Pump Type ...................... Gear
Pump Flow, gpm (Lpm) ......................11.6 (44.0)
System Pressure, Bar (psi) ...................... 172 (2500)
Hydraulic Reservoir Capacity, qts (L) ...................... 6.0 (5.7)
Hydraulic System Capacity, gal (L) ...................... 5.0 (18.9)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 1350 (612)
Tipping Load, lbs (kg) ...................... 2700 (1225)
Boom Lifting Force, lbs (kg) ...................... 2400 (1090)
Bucket Breakout Force, lbs (kg) ...................... 3500 (1590)

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 37.2 (945)
Height (Boom Raised), in (mm) ...................... 141.7 (3600)
Height (Operator Cab), in (mm) ...................... 74.1 (1885)
Length (w/o Bucket), in (mm) ...................... 97.6 (2480)
Length (Bucket On Ground), in (mm) ...................... 121.3 (3080)
Width (w/o Bucket), in (mm) ...................... 59 (1500)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 115.8 (2940)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 92.2 (2340)
Dump Reach At Max Height, in (mm) ...................... 19.8 (505)
Rollback Angle At Ground Level, deg ...................... 35
Rollback Angle At Max Height, deg ...................... 76
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 60 (1525)
Ground Clearance, in (mm) ...................... 8.5 (215)
Turning Radius (w/Bucket), in (mm) ...................... 65 (1650)
Shipping Weight, lbs (kg) ...................... 4075 (1850)
Operating Weight, lbs (kg) ...................... 4500 (2040)