New Holland LS150 Skid Steer Specifications

The New Holland LS150 skid steer loader driveline system components: a 91.3 cu.in (1.5L) Shibaura N843H 3-cylinder naturally aspirated liquid-cooled diesel engine with a rated power of 38 hp (28.3 kW), and 1-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 12 gal/min (45.4 l/min). The system relief pressure is 2600 psi (177 bar). The New Holland LS150 is equipped with 50/80 HD roller chains and 10x16.5 tires. The skid steer loader has a boom lifting force of 2400 lbs (1090 kg) and bucket breakout force of 3500 lbs (1590 kg). The rated operating capacity is 1400 lbs (635 kg), and tipping load is 2850 lbs (1295 kg).

Engine Specs

Engine Model ...................... Shibaura N843H
Engine Type ...................... 4-cycle vertical liquid-cooled diesel
Number of Cylinders ...................... Three
Displacement, cu.in (L) ...................... 91.3 (1.496)
Cylinder Bore, in (mm) ...................... 3.32 (84.0)
Piston Stroke, in (mm) ...................... 3.56 (90.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 38.0 (28.3)
Rated Engine Speed, rpm ...................... 3200
Maximum Torque, Nm (lb-ft) ...................... 99.1 (73.1)
Torque Speed, rpm ...................... 2000
Fast Idle Speed, rpm ...................... 3200-3300
Low Idle Speed, rpm ...................... 1100-1150
Compression Ratio ...................... 22:1
Firing Order ...................... 1-2-3
Fuel System ...................... Indirect injection
Valve Clearance, in (mm) ...................... 0.008 (0.20)
Fuel Tank Capacity, gal (L) ...................... 8.8 (33.1)
Oil Capacity, qts (L) ...................... 5.8 (5.5)
Coolant Capacity, qts (L) ...................... 9.8 (9.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40

Drive Train

Drive System Type ...................... Hydrostatic, chain drive
Number of Gears ...................... Single
Chain Drive Type ...................... 50/80 HD roller chains
Drive Motor Type ...................... Axial piston
Front Tire Size (Std) ...................... 10x16.5
Rear Tire Size (Opt) ...................... 10x16.5
Chaincase Capacity, qts (L) ...................... 6.0 (5.7)
Forward Speed, mph (kph) ...................... 7.5 (12.1)
Reverse Speed, mph (kph) ...................... 7.5 (12.1)

Hydraulic System

Hydraulic System Type ...................... Open Center
Hydraulic Pump Type ...................... Gear
Pump Flow, gpm (Lpm) ......................12.0 (45.4)
System Pressure, Bar (psi) ...................... 170-177 (2500-2600)
Hydraulic System Capacity, gal (L) ...................... 5.0 (18.9)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 1400 (635)
Tipping Load, lbs (kg) ...................... 2850 (1295)
Boom Lifting Force, lbs (kg) ...................... 2400 (1090)
Bucket Breakout Force, lbs (kg) ...................... 3500 (1590)

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 37.5 (950)
Height (Boom Raised), in (mm) ...................... 136 (3450)
Height (Operator Cab), in (mm) ...................... 72.8 (1850)
Length (w/o Bucket), in (mm) ...................... 96.3 (2445)
Length (Bucket On Ground), in (mm) ...................... 120 (3040)
Width (w/o Bucket), in (mm) ...................... 58.7 (1490)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 111 (2820)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 88 (2230)
Dump Reach At Max Height, in (mm) ...................... 24 (610)
Rollback Angle At Ground Level, deg ...................... 35
Rollback Angle At Max Height, deg ...................... 76
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 60 (1525)
Ground Clearance, in (mm) ...................... 8.3 (210)
Turning Radius (w/Bucket), in (mm) ...................... 70.4 (1790)
Shipping Weight, lbs (kg) ...................... 4080 (1855)
Operating Weight, lbs (kg) ...................... 4500 (2045)