New Holland LS170 Skid Steer Specifications

The New Holland LS170 skid steer loader is powered by 121.7 cu.in (2L) Shibaura N844T four-cylinder indirect injection turbocharged liquid-cooled diesel engine with a rated power of 52 hp (38.8 kW) at 2900 rpm. The New Holland LS170 is equipped with a single-speed transmission, 80 HD roller chains, and 10x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 17.7 gpm (67.1 lpm). The hydraulic pressure is 2600 psi (177 bar). The skid steer loader has a rated operating capacity of 1765 lbs (800 kg) and tipping load of 3530 lbs (1600 kg). The boom lifting force is 2825 lbs (1285 kg), and bucket breakout force is 3712 lbs (1685 kg).

Engine Specs

Engine Model ...................... Shibaura N844T
Engine Type ...................... 4-cycle 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 121.7 (1.995)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.54 (90.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 52.0 (38.8)
Rated Engine Speed, rpm ...................... 2900
Maximum Torque, Nm (lb-ft) ...................... 153 (113)
Torque Speed, rpm ...................... 1700
Fast Idle Speed, rpm ...................... 3130-3180
Low Idle Speed, rpm ...................... 900-1000
Compression Ratio ...................... 22:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Valve Clearance, in (mm) ...................... 0.008 (0.20)
Fuel Tank Capacity, gal (L) ...................... 14.4 (54.5)
Oil Capacity, qts (L) ...................... 8.8 (8.3)
Coolant Capacity, qts (L) ...................... 10.8 (10.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40

Drive Train

Drive System Type ...................... Hydrostatic, chain drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80 HD roller chains
Drive Motor Type ...................... Axial piston
Tire Size (Std) ...................... 10x16.5 HD
Tire Size (Opt) ...................... 31x15.5-12
Chaincase Capacity, qts (L) ...................... 13.1 (12.3)
Forward Speed, mph (kph) ...................... 7.5 (12.1)
Reverse Speed, mph (kph) ...................... 7.5 (12.1)

Hydraulic System

Hydraulic System Type ...................... Open Center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ......................17.7 (67.1)
Pump Flow (Opt), gpm (Lpm) ...................... 24.5 (92.8)
System Pressure, Bar (psi) ...................... 170-177 (2500-2600)
Hydraulic Reservoir Capacity, qts (L) ...................... 15.7 (14.8)
Hydraulic System Capacity, gal (L) ...................... 8.6 (32.6)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 1765 (800)
Tipping Load, lbs (kg) ...................... 3530 (1600)
Boom Lifting Force, lbs (kg) ...................... 2825 (1285)
Bucket Breakout Force, lbs (kg) ...................... 3712 (1685)

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 42.5 (1080)
Height (Boom Raised), in (mm) ...................... 140 (3555)
Height (Operator Cab), in (mm) ...................... 74.7 (1900)
Length (w/o Bucket), in (mm) ...................... 101.5 (2575)
Length (Bucket On Ground), in (mm) ...................... 126.8 (3220)
Width (w/o Bucket), in (mm) ...................... 65.6 (1665)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 115.5 (2935)
Dump Angle At Max Height, deg ...................... 46
Dump Height (Fully Raised), in (mm) ...................... 90.4 (2295)
Dump Reach At Max Height, in (mm) ...................... 29 (740)
Rollback Angle At Ground Level, deg ...................... 36
Rollback Angle At Max Height, deg ...................... 83
Departure Angle, deg ...................... 23
Bucket Width, in (mm) ...................... 66 (1675)
Ground Clearance, in (mm) ...................... 7.7 (195)
Turning Radius (w/Bucket), in (mm) ...................... 74 (1890)
Shipping Weight, lbs (kg) ...................... 5100 (2320)
Operating Weight, lbs (kg) ...................... 5540 (2515)