New Holland LS190B Skid Steer Specifications

The New Holland LS190B skid steer loader driveline system components: a 274 cu.in (4.5L) CNH 445T/M2 vertical 4-cylinder direct injection turbocharged diesel engine with a rated power of 80 hp (60 kW), and 2-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 21.9 gal/min (83 l/min). The system pressure is 3050 psi (210 bar). The New Holland LS190B is equipped with 100 HD roller chains and 14x17.5 tires. The skid steer loader has a boom lifting force of 5200 lbs (2360 kg) and bucket breakout force of 6035 lbs (2737 kg). The rated operating capacity is 2800 lbs (1270 kg), and tipping load is 5600 lbs (2450 kg).

Engine Specs

Engine Model ...................... CNH 445T/M2
Engine Type ...................... 4-cycle vertical liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 274 (4.50)
Cylinder Bore, in (mm) ...................... 4.09 (104.0)
Piston Stroke, in (mm) ...................... 5.19 (132.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 80.0 (60.0)
Rated Engine Speed, rpm ...................... 2200
Maximum Torque, Nm (lb-ft) ...................... 320 (236)
Torque Speed, rpm ...................... 1400
Fast Idle Speed, rpm ...................... 2380-2480
Low Idle Speed, rpm ...................... 750-850
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Tank Capacity, gal (L) ...................... 21.5 (81.0)
Oil Capacity, qts (L) ...................... 12.7 (12.0)
Coolant Capacity, qts (L) ...................... 18.1 (17.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... Hydrostatic, chain drive
Number of Gears ...................... Two (high/low)
Chain Drive Type ...................... 100 HD roller chains
Drive Motor Type ...................... Axial piston
Tire Size (Std) ...................... 14x17.5 HD
Tire Size (Opt) ...................... 33x15.5-12
Chaincase Capacity, qts (L) ...................... 7.2 (6.8)
Travel Speed (Low), mph (kph) ...................... 7.1 (11.7)
Travel Speed (High), mph (kph) ...................... 11.4 (18.3)

Hydraulic System

Hydraulic System Type ...................... Open Center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ......................21.9 (83.0)
Pump Flow (Opt), gpm (Lpm) ...................... 37.3 (141.4)
System Pressure, Bar (psi) ...................... 210 (3050)
Hydraulic Reservoir Capacity, qts (L) ...................... 20.0 (18.9)
Hydraulic System Capacity, gal (L) ...................... 15.0 (56.8)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 2800 (1270)
Tipping Load, lbs (kg) ...................... 5600 (2450)
Boom Lifting Force, lbs (kg) ...................... 5200 (2360)
Bucket Breakout Force, lbs (kg) ...................... 6035 (2737)

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 51 (1295)
Height (Boom Raised), in (mm) ...................... 153 (3885)
Height (Operator Cab), in (mm) ...................... 79.5 (2020)
Length (w/o Bucket), in (mm) ...................... 115 (2920)
Length (Bucket On Ground), in (mm) ...................... 146 (3710)
Width (w/o Bucket), in (mm) ...................... 76.4 (1940)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 125.6 (3190)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 102 (2590)
Dump Reach At Max Height, in (mm) ...................... 32.1 (820)
Rollback Angle At Ground Level, deg ...................... 37
Rollback Angle At Max Height, deg ...................... 76
Departure Angle, deg ...................... 27
Bucket Width, in (mm) ...................... 78 (1980)
Ground Clearance, in (mm) ...................... 10.1 (260)
Turning Radius (w/Bucket), in (mm) ...................... 80 (2030)
Shipping Weight, lbs (kg) ...................... 7150 (3250)
Operating Weight, lbs (kg) ...................... 7860 (3565)