Gehl 6625DX Skid Steer Specifications

The Gehl 6625 DX skid steer loader driveline system components: a 183 cu.in (3L) Perkins 204.30 four-cylinder liquid-cooled diesel engine with a rated power of 70 hp (52 kW), and single-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 23 gal/min (87.1 l/min). The system relief pressure is 3000 psi (207 bar). The Gehl 6625DX is equipped with a radial-lift loader boom, 80H roller chains, and 12x16.5 or 31-15.5x15 tires. The skid steer loader has a maximum lift height of 123" (3125 mm) to hinge pin and dump height of 98.8" (2510 mm). The rated operating capacity is 2050 lbs (930 kg), and tipping load is 4100 lbs (1860 kg).

Engine Specs

Engine Model ...................... Perkins 204.30
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 183 (3.0)
Cylinder Bore, in (mm) ...................... 3.74 (95.0)
Piston Stroke, in (mm) ...................... 4.13 (105.0)
Rated Engine Power, hp (kW) ...................... 70.0 (52.0)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 194 (143)
Torque Speed, rpm ...................... 2000
Compression Ratio ...................... 21:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Injection pump
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dual element
Valve Clearance (Inlet), in (mm) ...................... 0.012 (0.30)
Valve Clearance (Exhaust), in (mm) ...................... 0.012 (0.30)
Fuel Tank Capacity, gal (L) ...................... 18.0 (68.0)
Oil Capacity, qts (L) ...................... 6.3 (6.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40

Drive Train

Drive System Type ...................... Power-assist controlled hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80H roller chain
Tire Size (Std) ...................... 12x16.5
Tire Size (Opt) ...................... 31-15.5x15
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Planetary Gear Capacity, qts (L) ...................... 1.0 (0.9)
Forward Speed, mph (km/h) ...................... 6.5 (10.4)
Reverse Speed, mph (km/h) ...................... 6.5 (10.4)

Hydraulic System

Hydraulic System Type ...................... Open center
Pump Capacity (Standard), gpm (Lpm) ...................... 23.0 (87.1)
Pump Capacity (High Flow), gpm (Lpm) ...................... 39.0 (147.8)
System Pressure, Bar (psi) ...................... 207 (3000)
Hydraulic Reservoir Capacity, gal (L) ...................... 18.0 (68.0)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 2050 (930)
Tipping Load, lbs (kg) ...................... 4100 (1860)
Loader Boom Type .................... Radial-lift

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 42 (1070)
Height (Operator Cab), in (mm) ...................... 82 (2085)
Height (Boom Raised), in (mm) ...................... 155.7 (3955)
Length (w/o Bucket), in (mm) ...................... 105.5 (2680)
Length (Bucket On Ground), in (mm) ...................... 135.1 (3430)
Width (w/o Bucket), in (mm) ...................... 69 (1755)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 123 (3125)
Dump Angle At Max Height, deg ...................... 37
Dump Height (Fully Raised), in (mm) ...................... 98.8 (2510)
Dump Reach At Max Height, in (mm) ...................... 38.5 (980)
Rollback Angle At Ground Level, deg ...................... 34
Rollback Angle At Max Height, deg ...................... 93
Departure Angle, deg ...................... 30
Grading Angle, deg ...................... 92
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 10.5 (265)
Turning Radius (w/Bucket), in (mm) ...................... 82.3 (2090)
Shipping Weight, lbs (kg) ...................... 6200 (2810)
Operating Weight, lbs (kg) ...................... 6820 (3095)