Gehl R105 Skid Steer Maintenance Data

The Gehl R105 skid steer loader is powered by 100.2 cu.in (1.6L) Yanmar 3TNV88C three-cylinder direct injection liquid-cooled diesel engine with a rated power of 34.7 hp (25.5 kW) at 2800 rpm. The Gehl R105 is equipped with a single-speed hydrostatic transmission, radial-lift loader boom, 80H roller chains, and 27-8.5x15 tires. The hydraulic system has a pump with fluid flow rate of 14.5 gpm (55 lpm). The hydraulic pressure is 2750 psi (190 bar). The skid steer loader has a rated operating capacity of 1050 lbs (475 kg) and tipping load of 2100 lbs (950 kg). The lift height is 107.5 inches (2730 mm) to hinge pin, and dump height is 82 inches (2085 mm).

Refill Capacities

Fuel Tank Capacity, gal (L) ...................... 10.0 (38.0)
Engine Oil Capacity, gal (L) ...................... 1.9 (7.2)
Engine Coolant Capacity, gal (L) ...................... 1.6 (6.0)
Hydraulic Reservoir Fluid Capacity, gal (L) ...................... 10.0 (37.9)
Chain Case Oil Capacity, gal (L) ...................... 2.0 (7.6)

Recommended Oil and Fluid

Engine Oil Type ...................... SAE 10W-30, SAE 15W-40. API Service Category CJ-4 or higher
Engine Coolant Type ...................... 50/50 Antifreeze/Coolant
Hydraulic Fluid Type ...................... Petro Canada HVI60, Mobil DTE 15M or equivalent
Chain Case Oil Type ...................... Mobil DTE 15M or SAE 10W30

Service Intervals

Lubricate Cylinder Pivot Points ...................... Every 50 Hours
Check Hydraulic Fluid Level ...................... Every 50 Hours
Check Chain Case Oil Level ...................... Every 250 Hours
Check Alternator/Fan Belt ...................... Every 250 Hours
Check Drive Chain Tension ...................... Every 250 Hours
Check Battery Condition...................... Every 250 Hours
Adjust Parking Brake ...................... Every 250 Hours
Check Radiator Hoses and Clamps ...................... Every 250 Hours
Change Engine Oil ...................... Every 500 Hours
Replace Engine Oil Filter ...................... Every 500 Hours
Replace Hydraulic Oil Filter ...................... Every 500 Hours
Replace Fuel Filter ...................... Every 500 Hours
Replace Primary Engine Air Filter ...................... Every 500 Hours
Replace Secondary Engine Air Filter ...................... Every 500 Hours
Change Hydraulic Fluid ...................... Every 1000 Hours
Change Chain Case Oil ...................... Every 1000 Hours
Change Engine Coolant ...................... Every 1000 Hours

Replacement Parts

Engine Oil Filter. Part Number ...................... 195568 (Element)
Primary Fuel Filter. Part Number ...................... 137500 (w/o DPF), 50352551 (with DPF)
Fuel Water Separator. Part Number ...................... 182130 (w/o DPF), 50352550 (with DPF)
Primary Engine Air Filter. Part Number ...................... 188814 (Element)
Secondary Engine Air Filter. Part Number ...................... 188817 (Element)
Hydraulic Oil Filter. Part Number ...................... 074830 (Element)
Alternator Belt. Part Number ...................... 188730

________________________________________________________________________________

________________________________________________________________________________________

BOBCAT SKID STEER AND COMPACT TRACK LOADERS

S100