________________________________________________________________________________
Kubota OC95-E2 Engine
General Technical Data
Kubota OC95 Engine Specifications
Engine Model ............... Kubota OC95-E2
Engine Type ............... Oil-cooled 4-cycle diesel engine
Number of Cylinders ............... 1
Displacement, cc (cu.in) ............... 416 (25.4)
Cylinder Bore, mm (in) ............... 83.0 (3.27)
Piston Stroke, mm (in) ............... 77.0 (3.03)
Rated Engine Power, hp (kW) ............... 9.5 (7.0)
Rated Engine Speed, rpm ............... 3600
Maximum Torque, Nm (ft-lbs) ............... 22.5 (16.7)
Torque Speed, rpm ............... 2200
Compression Ratio ............... 24:1
Direction of Rotation ............... Clockwise (View from flywheel side)
Cooling System ............... Oil cooling and air cooling
Starting System ............... Electric starter
Fuel Tank Capacity, L (gal) ............... 3.6 (0.95)
Oil Capacity, L (qts) ............... 1.7 (1.8)
Electrical System Rating, Volts ............... 12
Fuel System
Fuel System Type ............... Injection pump
Injection Pump Model ............... DN4PD82 (Denso)
Injection Timing, deg (rad) ............... 13-15 (0.23-0.26) BTDC
Injection Pressure, Mpa (psi) ............... 13.7 (1987)
Governor Type ............... Centrifugal, mechanical
Lubrication System
Lubrication System ............... Forced lubrication with trochoid pump
Oil Filter Type ............... Oil strainer
Engine Oil Pressure (Idle Speed), kPa (psi) ............... 49 (7)
Engine Oil Pressure (Rated Speed), kPa (psi) ............... 147-490 (21-71)
Inner Rotor to Outer Rotor Clearance, mm (in) ............... 0.15 (0.0059)
Outer Rotor to Pump Body Clearance, mm (in) ............... 0.090-0.171 (0.0035-0.0067)
Dimensions and Weight
Overall Length, mm (in) ............... 503 (19.8)
Overall Width, mm (in) ............... 452 (17.80)
Overall Height, mm (in) ............... 501 (19.73)
Net weight, kg (lbs) ............... 55.0 (121.3)
Kubota OC95 Maintenance Data
Engine Oil and Filters
Engine Oil Type ............... SAE 10W-30, 10W-40
Oil Classification (API Service) ............... CC or higher
Oil Capacity, L (qts) ............... 1.7 (1.8)
Fuel Filter Element Part Number ............... 11460-43012
Air Filter Part Number ............... 11460-11180
Service Intervals
Check rubber hoses and clamp bands ............... Every 50 hours
Change Engine Oil ............... Every 100 hours
Clean Fuel Filter ............... Every 100 hours
Clean Air Cleaner ............... Every 100 hours
Clean Oil Strainer ............... Every 100 hours
Replace Fuel Filter ............... Every 500 hours
Replace Air Cleaner ............... Every 600 hours
Check and Adjust Valve Clearance ............... Every 800 hours
Check Nozzle Injection Pressure ............... Every 800 hours
Clean Injection Nozzle ............... Every 1500 hours
Kubota OC95 Service Specifications
Cylinder Block
Cylinder Compression, MPa (psi) ............... 3.43-3.92 (498 to 569)
Cylinder Bore I.D (Std), mm (in) ............... 83.018-83.038 (3.2684-3.2692)
Cylinder Bore I.D (Wear Limit), mm (in) ............... 83.10 (3.272)
Connecting Rod Alignment, mm (in) ............... 0.05 (0.0020)
Connecting Rod Small End to Piston Pin Clearance, mm (in) ............... 0.012-0.040 (0.0005-0.0016)
Connecting Rod Small End I.D, mm (in) ............... 23.025-23.040 (0.9065-0.9071)
Crankshaft Alignment, mm (in) ............... 0.02 (0.0008)
Crankshaft Journal to Bearing Oil Clearance, mm (in) ............... 0.028-0.090 (0.0011-0.0035)
Crank Pin to Crank Pin Bearing Oil Clearance, mm (in) ............... 0.025-0.087 (0.0010-0.0034)
Crankshaft O.D, mm (in) ............... 39.934-39.950 (1.5722-1.5728)
Crankshaft Bearing I.D, mm (in) ............... 39.978-40.024 (1.5739-1.5757)
Crankshaft Side Clearance, mm (in) ............... 0.05-0.20 (0.0020-0.0079)
Piston Pin Bore, mm (in) ............... 23.000-23.013 (0.9055-0.9060)
Compression Ring Groove Clearance (Standard), mm (in) ............... 0.045-0.080 (0.0018-0.0031)
Compression Ring Groove Clearance (Wear Limit), mm (in) ............... 0.15 (0.0059)
Compression Ring Groove Width, mm (in) ............... 2.035-2.050 (0.0801-0.0807)
Compression Ring Width, mm (in) ............... 1.970-1.990 (0.0776-0.0783)
Oil Ring Groove Clearance (Standard), mm (in) ............... 0.020-0.055 (0.0008-0.0022)
Oil Ring Groove Clearance (Wear Limit), mm (in) ............... 0.15 (0.0059)
Oil Ring Groove Width, mm (in) ............... 4.010-4.025 (0.1579-0.1585)
OIl Ring Width, mm (in) ............... 3.970-3.990 (0.1563-0.1571)
Ring End Gap (Compression Ring 1), mm (in) ............... 0.15-0.30 (0.0059-0.0118)
Ring End Gap (Compression Ring 2), mm (in) ............... 0.30-0.50 (0.0118-0.0197)
Ring End Gap (Oil Ring), mm (in) ............... 0.25-0.40 (0.0098-0.0157)
Cylinder Head and Valves
Cylinder Head (Max Out-of-Flatness), mm (in) ............... 0.05 (0.002)
Cylinder Head Gasket Thickness, mm (in) ............... 1.35-1.55 (0.0531-0.0610)
Valve Clearance (Cold), mm (in) ............... 0.14-0.18 (0.0055-0.0071)
Valve Seat Width, mm (in) ............... 2.12 (0.0835)
Valve Seat Angle, deg (rad) ............... 45 (0.785)
Valve Face Angle, deg (rad) ............... 45.5 (0.794)
Valve Recessing, mm (in) ............... 0.60-0.85 (0.0236-0.0335)
Valve Stem to Valve Guide Clearance, mm (in) ............... 0.035-0.065 (0.0014-0.0026)
Valve Stem O.D, mm (in) ............... 6.960-6.975 (0.2740-0.2746)
Valve Guide I.D, mm (in) ............... 7.010-7.025 (0.2760-0.2766)
Intake Valve Open, deg (rad) ............... 20 (0.35) before TDC
Intake Valve Close, deg (rad) ............... 49 (0.86) after BDC
Exhaust Valve Open, deg (rad) ............... 54 (0.94) before BDC
Exhaust Valve Close, deg (rad) ............... 15 (0.26) after TDC
Valve Spring Free Length, mm (in) ............... 36.5-37.0 (1.4370-1.4567)
Rocker Arm Shaft to Shaft Hole Clearance, mm (in) ............... 0.016-0.045 (0.0006-0.0018)
Rocker Arm Shaft O.D, mm (in) ............... 13.973-13.984 (0.5501-0.5506)
Rocker Arm Shaft Hole I.D, mm (in) ............... 14.000-14.018 (0.5512-0.5519)
Tappet and Guide Clearance, mm (in) ............... 0.018-0.058 (0.0007-0.0023)
Tappet O.D, mm (in) ............... 7.972-7.987 (0.3139-0.3144)
Tappet Guide I.D, mm (in) ............... 8.005-8.030 (0.3152-0.3161)
Camshaft Journal Clearance, mm (in) ............... 0.016-0.045 (0.0006-0.0018)
Camshaft Journal O.D, mm (in) ............... 16.989-17.000 (0.6689-0.6693)
Camshaft Side Clearance, mm (in) ............... 0.05-0.20 (0.0020-0.0079)
Cam Height (Intake), mm (in) ............... 28.0 (1.1024)
Cam Height (Exhaust), mm (in) ............... 30.0 (1.1811)
Balancer Gears
Balancer Gear 1/Balancer Gear 2, mm (in) ............... 0.033-0.170 (0.0013-0.0067)
Balancer Shaft to Balancer Bearing Clearance, mm (in) ............... 0.016-0.042 ( 0.0006-0.0017)
Balancer Shaft O.D, mm (in) ............... 15.992-16.000 (0.6296-0.6299)
Bearing I.D, mm (in) ............... 16.016-16.034 (0.6306-0.6313)
Balancer Gear Side Clearance (Standard), mm (in) ............... 0.12-0.37 (0.0047-0.0146)
Balancer Gear Side Clearance (Wear Limit), mm (in) ............... 0.5 (0.0197)
Kubota OC95 Tightening Torque Specs
Cylinder head screws (M12x1.75), Nm (ft-lb) ............... 68.6-73.6 (50.6-54.2)
Connecting rod screws (M8x1.25), Nm (ft-lb) ............... 27.5-30.4 (20.3-22.4)
Flywheel nut (M24x1.5), Nm (ft-lb) ............... 235-255 (174-188)
Side cover screws (M8x1.25), Nm (ft-lb) ............... 23.5-27.4 (17.4-20.3)
Rocker arm bracket mounting nut (M8x1.25), Nm (ft-lb) ............... 23.5-27.4 (17.4-20.3)
Injection pump mounting screw (M6x1.0), Nm (ft-lb) ............... 9.8-11.3 (7.2-8.3)
Injection pump eye joint bolt (M10x1.0), Nm (ft-lb) ............... 14.7-19.6 (10.8-14.5)
Injection pipe retaining nuts (M12x1.5), Nm (ft-lb) ............... 24.5-34.3 (18.1-25.3)
Oil pipe eye joint bolt (M12x1.25), Nm (ft-lb) ............... 24.5-29.4 (18.1-21.7)
Grow plug (M10x1.25), Nm (ft-lb) ............... 19.6-24.5 (14.5-18.1)
Nozzle holder mounting nuts (M8x1.25), Nm (ft-lb) ............... 13.72-17.6 (10.1-13)
Oil switch taper screw (PT1/8), Nm (ft-lb) ............... 14.7-19.6 (10.8-14.5)
Exhaust manifold mounting nuts (M8x1.25), Nm (ft-lb) ............... 23.5-27.4 (17.4-20.3)
- VIEW ALL KUBOTA ENGINES
- Kubota OC60 Specs
- Kubota RK60 Specs
- Kubota RK70 Specs
- Kubota RK80 Specs
- Kubota RK95 Specs
- Kubota EA300 Specs
- Kubota EA330 Specs
________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
KUBOTA TRACTORS SPECIFICATIONS |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
KUBOTA ENGINES DATA AND SERVICE SPECS |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
KUBOTA FRONT END LOADERS |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
KUBOTA TRACTORS TROUBLESHOOTING | ||||
L235 | L2501 | L2550 | L275 | L3110 |
L3301 | L35 | L3710 | L3901 | L4310 |
L5030 | M4700 | M5700 | M6040 | M6800 |
M8200 | M8540 | M9000 | MX5100 | MX5200 |