New Holland C175 Track Loader Specifications

The New Holland C175 compact track loader driveline system components: a 135 cu.in (2.2L) Shibaura N844LT four-cylinder turbocharged diesel engine with a rated power of 60 hp (45 kW), and 2-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 17.2 gal/min (65.2 l/min). The system relief pressure is 2500 psi (172 bar). The New Holland C175 is equipped with hydraulic disc brakes and steel-embedded rubber tracks. The compact track loader has a boom lifting force of 3003 lbs (1360 kg) and bucket breakout force of 4312 lbs (1955 kg). The rated operating capacity is 2200 lbs (998 kg), and tipping load is 6300 lbs (2860 kg).

Engine Specs

Engine Model ...................... Shibaura N844LT
Engine Type ...................... 4-cycle 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 135 (2.216)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.94 (100.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 60.0 (45.0)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 173 (128)
Torque Speed, rpm ...................... 1700
Fast Idle Speed, rpm ...................... 3100-3180
Low Idle Speed, rpm ...................... 1150-1250
Compression Ratio ...................... 22.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Tank Capacity, gal (L) ...................... 16.3 (61.7)
Oil Capacity, qts (L) ...................... 8.5 (8.0)
Coolant Capacity, qts (L) ...................... 12.1 (11.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55

Drive Train

Drive System Type ...................... Hydrostatic with mechanical or pilot control
Number of Gears ...................... Two (low/high)
Drive Pump Type ...................... Piston
Drive Motor Type ...................... Axial piston
Planetary Gearbox Capacity (Each), qts (L) ...................... 0.69 (0.65)
Forward Speed (Low range), mph (kph) ...................... 5.6 (8.9)
Reverse Speed (Low range), mph (kph) ...................... 5.6 (8.9)
Forward Speed (High range), mph (kph) ...................... 7.4 (11.8)
Reverse Speed (High range), mph (kph) ...................... 7.4 (11.8)

Undercarriage

System Type ...................... High drive offset tread pattern
Track Type ...................... Steel-embedded rubber track
Track Width, in (mm) ...................... 12.6 (320)
Track Rollers (per Side) ...................... 3 triple flange crawler-style rollers
Track Idlers (per Side) ...................... 2 single flange front and rear idlers

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ...................... 17.2 (65.2)
Pump Flow (Opt), gpm (Lpm) ...................... 25.5 (96.6)
System Pressure, Bar (psi) ...................... 172 (2500)
Hydraulic Reservoir Capacity, gal (L) ...................... 3.9 (14.8)
Hydraulic System Capacity, gal (L) ...................... 8.6 (32.6)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity (50%), lbs (kg) ...................... 3150 (1430)
Rated Operating Capacity (35%), lbs (kg) ...................... 2200 (998)
Tipping Load, lbs (kg) ...................... 6300 (2860)
Boom Lifting Force, lbs (kg) ...................... 3003 (1360)
Bucket Breakout Force, lbs (kg) ...................... 4312 (1955)

Dimensions and Weight

Operating Height, in (mm) ...................... 146.4 (3715)
Height (Operator Cab), in (mm) ...................... 75.9 (1930)
Length (w/o Bucket), in (mm) ...................... 104.8 (2660)
Length (Bucket On Ground), in (mm) ...................... 129.7 (3295)
Length (Ground Contact), in (mm) ...................... 54.9 (1395)
Width (w/o Bucket), in (mm) ...................... 70.6 (1790)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 119.7 (3040)
Dump Angle At Max Height, deg ...................... 43
Dump Height (Fully Raised), in (mm) ...................... 95.4 (2425)
Dump Reach At Max Height, in (mm) ...................... 30.2 (770)
Rollback Angle At Ground Level, deg ...................... 35
Rollback Angle At Max Height, deg ...................... 76
Departure Angle, deg ...................... 32
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 8.3 (210)
Turning Radius (w/Bucket), in (mm) ...................... 70 (1780)
Operating Weight, lbs (kg) ...................... 7535 (3420)