New Holland C227 Track Loader Specifications

The New Holland C227 compact track loader is powered by 207 cu.in (3.4L) FPT F5H FL463A four-cylinder direct injection turbocharged aftercooled diesel engine with a rated power of 68 hp (51 kW) at 2500 rpm. The New Holland C227 is equipped with a two-speed hydrostatic transmission and steel-embedded rubber tracks. The hydraulic system has a pump with fluid flow rate of 22.5 gpm (85.2 lpm). The hydraulic pressure is 3050 psi (210 bar). The compact track loader has a rated operating capacity of 1890 lbs (860 kg) and tipping load of 5400 lbs (2450 kg). The boom lifting force is 6080 lbs (2765 kg), and bucket breakout force is 7270 lbs (3305 kg).

Engine Specs

Engine Model ...................... FPT F5H FL463A
Engine Type ...................... 4-cycle liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 207 (3.39)
Cylinder Bore, in (mm) ...................... 3.89 (99.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged aftercooled
Rated Engine Power, hp (kW) ...................... 68.0 (51.0)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 314 (233)
Torque Speed, rpm ...................... 1400
Fast Idle Speed, rpm ...................... 2600-2750
Low Idle Speed, rpm ...................... 1000-1150
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Injection ...................... High pressure common rail
Emission Level ...................... Tier 4 interim, stage 4B
Fuel Tank Capacity, gal (L) ...................... 19.5 (74.0)
Oil Capacity, qts (L) ...................... 10.1 (9.5)
Coolant Capacity, qts (L) ...................... 18.0 (17.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 120

Drive Train

Drive System Type ...................... Hydrostatic with electro-hydraulic control
Number of Gears ...................... Two (low/high)
Pump Displacement, cu.in (cc) ...................... 2.75 (45)
Charge Pressure, Bar (psi) ...................... 24.5 (362)
Planetary Gearbox Capacity (Each), qts (L) ...................... 1.06 (1.0)
Forward Speed (Low range), mph (kph) ...................... 5.1 (8.2)
Reverse Speed (Low range), mph (kph) ...................... 5.1 (8.2)
Forward Speed (High range), mph (kph) ...................... 7.6 (12.2)
Reverse Speed (High range), mph (kph) ...................... 7.6 (12.2)

Undercarriage

System Type ...................... S-Wave Pattern
Track Type ...................... Steel-embedded rubber track
Track Width, in (mm) ...................... 12.6 (320)
Track Rollers (per Side) ...................... 3 triple flange lower rollers
Track Idlers (per Side) ...................... 2 single flange front and rear idlers

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ...................... 22.5 (85.2)
Pump Flow (Opt), gpm (Lpm) ...................... 30.8 (116.5)
System Pressure, Bar (psi) ...................... 210 (3050)
Hydraulic Reservoir Capacity, gal (L) ...................... 4.0 (15.0)
Hydraulic System Capacity, gal (L) ...................... 10.0 (38.0)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity (50%), lbs (kg) ...................... 2700 (1225)
Rated Operating Capacity (35%), lbs (kg) ...................... 1890 (860)
Tipping Load, lbs (kg) ...................... 5400 (2450)
Boom Lifting Force, lbs (kg) ...................... 6080 (2765)
Bucket Breakout Force, lbs (kg) ...................... 7270 (3305)

Dimensions and Weight

Operating Height, in (mm) ...................... 154.3 (3920)
Height (Operator Cab), in (mm) ...................... 78.7 (2000)
Length (w/o Bucket), in (mm) ...................... 105.1 (2670)
Length (Bucket On Ground), in (mm) ...................... 129.6 (3290)
Length (Ground Contact), in (mm) ...................... 55.9 (1420)
Width (w/o Bucket), in (mm) ...................... 65.9 (1675)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 123 (3125)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 98.2 (2495)
Dump Reach At Max Height, in (mm) ...................... 22.3 (565)
Rollback Angle At Ground Level, deg ...................... 31
Rollback Angle At Max Height, deg ...................... 99
Departure Angle, deg ...................... 32
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 8.1 (205)
Turning Radius (w/Bucket), in (mm) ...................... 83.9 (2130)
Shipping Weight, lbs (kg) ...................... 7970 (3615)
Operating Weight, lbs (kg) ...................... 8270 (3750)