________________________________________________________________________________
New Holland 5640 Technical Specifications
New Holland 5640 Engine Specs
Engine Model - Ford Genesis
Engine Type - Four-cylinder 8-valve liquid-cooled diesel
Engine Power Rated, hp (kw) - 75,0 (55,0)
Number of cylinders - 4
Bore, in (mm) - 4,4 (111,8)
Stroke, in (mm) - 4,4 (111,8)
Displacement, cu.in (L) - 268 (4,39)
Compression Ratio - 17.5:1
Firing order - 1-3-4-2
Idle speed, rpm - 725-775
Maximum no-load speed, rpm - 2295-2375
Rated speed, rpm - 2200
Tappet clearance (Intake), in (mm) - 0,014-0,018 (0,36-0,46)
Tappet clearance (Exhaust), in (mm) - 0,017-0,021 (0,43-0,53)
Coolant Pump Type - Impeller
Fan diameter, in (mm) - 18,9 (480)
Standard Fuel Tank Capacity, gal (L) - 20,8 (94,6)
Cooling System Capacity, qts (L) - 15,4 (14,5)
Engine Oil (including filter), qts (L) - 12,2 (11,4)
Electrical System, Volts - 12
Alternator Rating, Amps - 100/55
Regulator - Integral with alternator
Starting motor - Positive engagement, solenoid operated
NH 5640 Power Take Off
Standard PTO Type - Two speed, non-shiftable, independent
Optional PTO - Two speed, shiftable, independent
Engine speed for 540 PTO speed, rpm - 1900
Engine speed for 1000 PTO speed (Std, Non-shiftable), rpm - 2050
Engine speed for 1000 PTO speed (Opt, Non-shiftable), rpm - 2100
New Holland 5640 Transmission
Transmission Type (SL) - 12F/12R Standard
Max. Forward Speed, mph (kph) - 18,8 (30,0)
Transmission Type (SL) - 24F/24R Dual Power
Max. Forward Speed, mph (kph) - 25,1 (40,0)
Transmission Type (SLE) - 16F/16R Standard
Max. Forward Speed, mph (kph) - 18,8 (30,0)
Creeper Gears - Option
Reduction Ratio - 5.08:1
Transmission Oil Capacity (12F/12R), gal (L) - 12,5 (56,8)
Transmission Oil Capacity (16F/16R), gal (L) - 13,3 (60,6)
New Holland 5640 Wheels and Tires
Drive Wheels - 2WD/4WD
Steering Wheels - Front Steer
Steering - Hydrostatic
Front Tires - 13,6-24
Rear Tires - 16,9-34
Axles and Brakes
Front Wheel Toe-Out (2WD), in (mm) - 0-0,5 (0-13)
Front Wheel Toe-Out (4WD), in (mm) - 0-0,25 (0-6)
Rear Axle Capacity, qts (L) - 64,5 (60,6)
Front Hubs Capacity (FWD), qts (L) - 3,2 (3,0)
Front Axle Capacity (FWD), qts (L) - 6,7 (6,2)
Brakes Type - Wet disc, hydraulically actuated
Disc Diameter (overall), in (mm) - 8,8 (224)
Parking Brake - Operates on footbrake mechanism
NH 5640 Hydraulic System
Hydraulic System Type (SL) - Open center
Hydraulic Pump Type - Standard
Flow at rated engine speed (Centre housing gear pump), gal/min (L/min) -
8,1 (36,8)
Flow at rated engine speed (Auxiliary engine-mounted gear pump), gal/min
(L/min) - 7,1 (32,2)
Relief Valve Pressure, psi (bar) - 2550 (176)
Hydraulic System Type (SLE) - Closed Centre Load Sensing
Hydraulic Pump Type - Variable displacement piston pump with gear-driven
charge pump
Minimum Delivery (Main pump), gal/min (L/min) - 17,4 (79,3)
Minimum Delivery (Charge pump), gal/min (L/min) - 20,9 (95,1)
Relief Valve Pressure, psi (bar) - 2700 (186)
Steering Pump Type - Fixed displacement gear pump
Steering flow at rated speed, gal/min (L/min) - 8,0 (36,5)
Maximum Steering Pressure, psi (bar) - 2100 (145)
Auxiliary Services Control Valve - Standard
Remote Control Valves - Up to four optional
3-Point Linkage
Rear Hitch Category - 2
Control (SL) - Position control and top-link draft sensing
Maximum lift capacity at link ends (without assist rams), lb (kg) - 6350
(2880)
Maximum lift capacity at 24-in to rear of link ends (without assist
rams), lb (kg) - 4910 (2227)
Maximum lift capacity at link ends (with one assist ram), lb (kg) - 9370
(4250)
Maximum lift capacity at 24-in to rear of link ends (with one assist
ram), lb (kg) - 7080 (3211)
Control (SLE) - Electronic Draft Control
Maximum lift capacity at link ends (without assist rams), lb (kg) - 6713
(3045)
Maximum lift capacity at 24-in to rear of link ends (without assist
rams), lb (kg) - 5190 (2350)
New Holland 5640 Dimensions and Weight
Height to top of cab, in (mm) - 107,2 (2722)
Height to top of rollbar, in (mm) - 100,9 (2565)
Height to top of hood, in (mm) - 67,3 (1711)
Crop clearance under front axle (2WD), in (mm) - 21,5 (546)
Crop clearance under front axle (4WD), in (mm) - 20,2 (512)
Crop clearance under rear axle, in (mm) - 15,5 (393)
Minimum ground clearance (under drawbar), in (mm) - 15,0 (381)
Minimum width (with cab), in (mm) - 80,2 (2036)
Minimum width (less cab) (2WD), in (mm) - 77,7 (1973)
Minimum width (less cab) (4WD), in (mm) - 80,0 (2032)
Maximum width (2WD), in (mm) - 100,6 (2556)
Maximum width (4WD), in (mm) - 99,4 (2524)
Overall length (2WD), in (mm) - 158,3 (4022)
Overall length (4WD), in (mm) - 158,7 (4030)
Wheelbase (2WD), in (mm) - 92,1 (2340)
Wheelbase (4WD), in (mm) - 93,0 (2362)
Minimum turning radius (without brakes) (2WD), in (mm) - 144,0 (3658)
Minimum turning radius (without brakes) (4WD), in (mm) - 159,0 (4040)
Weight 2WD (with cab), lb (kg) - 8129 (3687)
Weight 4WD (with cab), lb (kg) - 9121 (4137)
Weight 2WD (less cab), lb (kg) - 7100 (3220)
Weight 4WD (less cab), lb (kg) - 8092 (3670)
________________________________________________________________________________
________________________________________________________________________________________
NH TRACTORS SPECIFICATIONS | ||||
T2220 | T2420 | T4.115 | T4.80 | T4050 |
T5.110 | T5060 | T6.140 | T6050 | T7.185 |
T7.270 | T7050 | T8.350 | TD4040 | TD5050 |
TL90 | TS110 | TS6030 | TT75 | TV6070 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
NH TRACTORS TROUBLESHOOTING | ||||
6640 | G240 | L95 | M135 | T3040 |
T4.110 | T5.105 | T5070 | T6.180 | T6030 |
T7.270 | T7040 | TC29D | TC35 | TD5.85 |
TL100 | TS6.140 | TV140 | TM155 | TN65 |
________________________________________________________________________________________
FORD TRACTORS SPECIFICATIONS | ||||
TL100 | TS6.140 | TV140 | TM155 | TN65 |
640 | 850 | 950 | 1100 | 1210 |
1320 | 1520 | 1620 | 1710 | 1900 |
1910 | 2000 | 2810 | 3000 | 3600 |
3910 | 3930 | 4000 | 4600 | 4610 |
4630 | 5000 | 5030 | 5600 | 5610 |
5640 | 6600 | 6610 | 6640 | 7630 |
7740 | 7840 | 8240 | 8340 | 8770 |
TW-15 | TW-20 | TW-25 | TW-30 | TW-35 |