________________________________________________________________________________

New Holland T6.120 Specifications

NH T6.120 Engine Technical Data

Engine Model - FPT NEF
Engine Type - 4 stroke direct injection
Number of Cylinders - 4
Displacement, cu in (L) - 274 (4,5)
Engine Bore, in (mm) - 4,09 (104,0)
Engine Stroke, in (mm) - 5,20 (132,0)
Aspiration - Turbocharged
Intercooled - Air cooled
Rated Engine Power, hp (kW) - 110,0 (82,0)
Maximum Engine Power, hp (kW) - 121,0 (90,2)
Rated Engine Speed, rpm - 2200
Maximum Torque, Nm (ft-lbs) - 498 (368,5)
Torque Speed, rpm - 1500
Torque rise, % - 41
Emission level - Tier 4 / Stage IIIA
Emission control - Selective catalytic reduction (SCR)
Fuel System - High-pressure common rail injection
Fuel Injection to combustion chamber - 0
Fuel Tank Capacity, gal (L) - 46,2 (175,0)
Oil Capacity, qts (L) - 16,0 (15,1)
Coolant Capacity, qts (L) - 9,8 (37,0)
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120

New Holland T6.120 Power Take-Off

Rear PTO Operational Type - Electro-hydraulic
Clutch - Wet disc
PTO Horsepower, hp (kW) - 105,0 (78,3)
Rear PTO Speeds, rpm - 540/540E/1000
Engine / PTO Speeds, rpm - 1969/1546/1893
Front PTO - Optional
Front PTO Speeds, rpm - 1000

New Holland T6.120 Transmission

Transmission Type (Std) - Dual Command, 24F/24R (48F/48R with creeper)
Number of Forward Speeds - 24 (48)
Number of Reverse Speeds - 24 (48)
Powerschift Steps - 2
Maximum Speed Forward, mph (kph) - 24,9 (40,0)
Transmission Type (Opt) - Electro Command, 16F/16R (32F/32R with creeper)
Number of Forward Speeds - 16 (32)
Number of Reverse Speeds - 16 (32)
Maximum Speed Forward, mph (kph) - 31,1 (50,0)

NH T6.120 Wheels and Tires

Drive Wheels - MFWD 4WD
Steering Configuration - Front Steer
Steering System - hydrostatic power
Front Tire Size - 14.9 R24
Rear Tire Size - 16.9 R38

Axles and Brakes

Differential Lock - Standard
Final Drive - Epicyclic
Service Brake - Hydraulic wet disc

New Holland T6.120 Hydraulic System

Hydraulic System Type - Closed Centre Load Sensing
Implement Pump Type - Fixed Displacement pump
Implement Pump Flow, gpm (Lpm) - 21,2 (80,0)
Steering Pump Flow, gpm (Lpm) - 12,4 (47,0)
Hydraulic Pressure, Bar (psi) - 190 (2790)
Steering Pressure, Bar (psi) - 170 (2490)
Number of Standard Remote Valves - 4

3-Point Hitch

3-Point Hitch Category - 2
Draft Control - Electronic Draft Control
Standard Lift Capacity 600mm behind pin, lb (kg) - 7040 (3200)
Standard Lift Capacity at lift pin, lb (kg) - 17300 (7865)

NH T6.120 Dimensions and Weight

Wheelbase, in (mm) - 94 (2390)
Length, in (mm) - 192 (4882)
Height, in (mm) - 114 (2900)
Overall Width, in (mm) - 90 (2280)
Ground Clearance, in (mm) - 17 (427)
Steering angle, deg - 55
Track Width (min/max), in (mm) - 57,9/84,7 (1460/2134)
Operating Weight, lb (kg) - 11550 (5250)
Total Weight, lb (kg) - 19800 (9000)

• see other models
  

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________