________________________________________________________________________________

New Holland T8020 Technical Data

NH T8020 Engine Specifications

Engine Model - New Holland CNH
Engine Type - 4 valves turbocharged diesel
Number of Cylinders - 6
Displacement, cu in (L) - 506,5 (8,3)
Engine Bore, in (mm) - 4,49 (114,0)
Engine Stroke, in (mm) - 5,32 (135,0)
Aspiration - Turbocharged
Rated Engine Power, hp (kW) - 248,0 (182,0)
Maximum Engine Power, hp (kW) - 281,0 (207,0)
Rated Engine Speed, rpm - 2200
Maximum Torque, Nm (ft-lbs) - 1162 (857)
Torque Speed, rpm - 1500
Torque Rise, % - 47
Emission Level - Tier 3
Fuel System - Common Rail electronic injection
Fuel Tank Capacity, gal (L) - 180,0 (682,0)
Electrical System Rating, Volts - 12
Charging System - Alternator
Alternator Rating, Amps - 120

New Holland T8020 Power Take-Off

PTO Operational Type - Independent
PTO Horsepower, hp (kW) - 200,0 (149,1)
PTO Speeds, rpm - 540/1000
PTO / Engine Speeds, rpm - 540/1988, 1000/1984
PTO Activation - Electro-hydraulic

Transmission Configuration

Transmission (Std) - 19F/4R Ultra Command
Transmission Type - Full powershift with integrated electronic shuttle
Number of Forward Speeds - 19
Number of Reverse Speeds - 4
Clutch - Electro-hydraulic wet disc
Maximum Speed (Forward), mph (kph) - 31,3 (50,0)
Transmission (Opt) - 23F/6R Ultra Command
Transmission Type - Full powershift
Number of Forward Speeds - 23
Number of Reverse Speeds - 6
Maximum Speed (Forward), mph (kph) - 25,1 (40,0)

New Holland T8020 Wheels and Tires

Drive Wheels - 4WD 4x4
Steering Configuration - Front Steer
Steering System - Power Steering
Front Tire Size - 600/65 R28
Rear Tire Size - 710/70 R42

Axles and Brakes

Standard Front Axle - FWD
Optional Front Axle - Terraglide
Optional Front Axle - SuperSteer
Service Brake - Hydraulic wet disc

NH T8020 Hydraulic System

Hydraulic System Type - Closed centre load sensing
Implement Pump Type - Variable displacement pump
Implement Pump Flow, gpm (Lpm) - 43,7 (166,0)
Hydraulic Pressure, Bar (psi) - 224 (3250)
Number of Standard Remote Valves - 5

3-Point Hitch

3-Point Hitch Category - 3/3N
Draft Sensing or Lift Control - Electronic draft control
Standard Lift Capacity 24-in (610mm) behind pin, lb (kg) - 14755 (6706)
Standard Lift Capacity at lift pin, lb (kg) - 20080 (9126)
Front Hitch Max. Lift Capacity (4WD), lb (kg) - 14015 (6370)
Front Hitch Max. Lift Capacity (SuperSteer), lb (kg) - 14210 (6460)

New Holland T8020 Dimensions and Weight

Wheelbase (4WD), in (mm) - 121,2 (3070)
Wheelbase (SuperSteer), in (mm) - 129,3 (3280)
Length, in (mm) - 229,5 (5820)
Height, in (mm) - 131,1 (3320)
Overall Width, in (mm) - 98 (2490)
Ground Clearance, in (mm) - 14,7 (372)
Front Tread, in (mm) - 61,3-89,7 (1550-2270)
Rear Tread, in (mm) - 60,1-92,5 (1520-2340)
Turning Radius (4WD), in (mm) - 198 (5000)
Turning Radius (SuperSteer), in (mm) - 182 (4600)
Weight (4WD), lb (kg) - 19755 (8960)
Weight (Terraglide), lb (kg) - 20550 (9320)
Weight (SuperSteer), lb (kg) - 20145 (9140)

• see other models
  

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________