________________________________________________________________________________

New Holland T8040 Technical Specifications

New Holland T8040 Engine Specs

Engine Model - CNH 6TAA-8304
Engine Type - 4 stroke direct injection intercooled turbocharged diesel
Number of Cylinders - 6
Displacement, cu in (L) - 506 (8,3)
Engine Bore, in (mm) - 4,49 (114,0)
Engine Stroke, in (mm) - 5,32 (135,0)
Aspiration - Turbocharged
Rated Engine Power, hp (kW) - 304,4 (227,0)
Maximum Engine Power, hp (kW) - 336,6 (251,0)
Rated Engine Speed, rpm - 2000
Maximum Torque, Nm (ft-lbs) - 1367 (1011,5)
Torque Speed, rpm - 1500
Torque Rise, % - 39
Compression - 17.5:1
Intercooled - Air to air cooled
Emission Level - Tier 3
Fuel System - High-pressure common rail injection
Fuel Tank Capacity, gal (L) - 180,2 (682,0)
Electrical System Rating, Volts - 12
Charging System - Alternator
Alternator Rating, Amps - 150

NH T8040 Power Take-Off

PTO Operational Type - Independent
Clutch - Electro-hydraulic
PTO Horsepower, hp (kW) - 255,0 (190,2)
PTO Speeds, rpm - 540/1000
Engine Speeds, rpm - 540/1988, 1000/1984

New Holland T8040 Transmission

Transmission Model - Ultra Command
Transmission Type - 18F/4R Full powershift
Number of Forward Speeds - 18
Number of Reverse Speeds - 4
Gears with Creeper - 23+6
Clutch - Electro-hydraulic wet disc
Maximum Speed Forward, mph (kph) - 24,9 (40,0)

NH T8040 Wheels and Tires

Drive Wheels - 4WD
Steering Configuration - Front Steer
Steering System - Power Steering
Front Tire Size - 600/65 R28
Rear Tire Size - 710/70 R42

Axles and Brakes

Differential Lock - Standard
Final Drive - Epicyclic
Service Brake - Hydraulic wet disc

New Holland T8040 Hydraulic System

Hydraulic System Type - Closed Centre Load Sensing
Implement Pump Flow (Std), gpm (Lpm) - 43,9 (166,0)
Implement Pump Flow (Opt), gpm (Lpm) - 74,8 (283,0)
Hydraulic Pressure, Bar (psi) - 224 (3250)
Number of Standard Remote Valves - 3 to 5

New Holland T8040 Hitch

3-Point Hitch Category - 3N/3
Draft Sensing or Lift Control - Electronic draft control
Standard Lift Capacity 24-in behind pin, lb (kg) - 14040 (6370)
Standard Lift Capacity at lift pin, lb (kg) - 15180 (6890)
Optional Lift Capacity at lift pin, lb (kg) - 17930 (8130)

NH T8040 Dimensions and Weight

Wheelbase (4WD), in (mm) - 121,2 (3078)
Wheelbase (SuperSteer), in (mm) - 129,3 (3280)
Length, in (mm) - 229 (5830)
Height, in (mm) - 131 (3330)
Overall Width, in (mm) - 98 (2490)
Ground Clearance, in (mm) - 15 (372)
Turning Radius, in (mm) - 197 (5000)
Operating Weight, lb (kg) - 21660 (9830)
Shipping Weight (4WD), lb (kg) - 20370 (9240)
Shipping Weight (SuperSteer), lb (kg) - 20620 (9350)
Shipping Weight (TerraGlide), lb (kg) - 21170 (9600)

• see other models
  

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________