________________________________________________________________________________
New Holland TM140 Tractor Technical Information
NH TM140 Engine Specifications
Engine Model - New Holland
Engine Type - Six-cylinder diesel
Engine Power Rated, hp (kw) - 144,0 (106,0)
Rated Engine Speed, rpm - 2200
Fuel Tank, gal (litres) - 75,0 (285,0)
Cylinders - 6
Displacement, cu in (litres) - 457,0 (7,5)
Engine Bore, in (mm) - 4,4 (111,8)
Engine Stroke, in (mm) - 5,0 (120,0)
Maximum torque, Nm - 643
Rated torque speed, rpm - 1400
Torque rise - 34 %
Aspiration - Turbocharged
Air cleaner - Dual paper elements with aspirator
Oil filter - 1 full flow cartridge
Fuel filter - 1 paper element
Oil capacity, qts (litres) - 20,0 (18,9)
Coolant capacity, qts (litres) - 26,8 (25,4)
Electrical Rating, Volts - 12
Electrical Ground - Negative
Charging system - Alternator
Alternator Rating, Amps - 120
New Holland TM 140 Transmission
Transmission Type (Std) - Power Command Full PowerShift with auto change
Number of gears (Forward/Reverse) - 18F / 6R
Speed range (kph) - 1.94-40.0
Number of gears with creeper (Forward/Reverse) - 28F / 12R
Speed range with creeper (kph) - 0.31-40.0
Transmission Type (Opt) - Dual Command
Number of gears (Forward/Reverse) - 24F / 12R
Speed range (kph) - 1.80-40.0
Number of gears with creeper (Forward/Reverse) - 48F / 24R
Speed range with creeper (kph) - 0.23-40.0
Transmission Type (Opt) - Shuttle Command
Number of gears (Forward/Reverse) - 20F / 16R
Speed range (kph) - 1.40-40.0
Number of gears with creeper (Forward/Reverse) - 40F / 32R
Speed range with creeper (kph) - 0.23-40.0
New Holland TM140 Power Take-Off
Rear PTO - Standard
Rear PTO speeds, rpm - 540/540E/1000
Engine speeds, rpm - 1969/1526/2120
PTO clutch type - Wet clutch Multiplate
PTO Engagement - Electro Hydraulic, proportional control
Ground Speed PTO - Optional
Front PTO - Optional
Front PTO speed, rpm - 1000
New Holland TM140 Hydraulics and Hitch
Hydraulic system type (Standard) - CCLS (Closed centre load sensing)
Hydraulic flow, lpm (gpm) - 112,0 (29,6)
Steering flow, lpm (gpm) - 62,0 (16,8)
Total oil flow, lpm (gpm) - 174,0 (47,0)
CCLS hydraulic pressure, bar - 200
Hydraulic system type (Optional) - Open centre
Hydraulic flow, lpm (gpm) - 53,0 (14,2)
Steering flow, lpm (gpm) - 52,0 (14,1)
Total oil flow, lpm (gpm) - 106,0 (28,6)
Open centre hydraulic pressure, bar - 180
Maximal number of rear valves - 4
Hitch type - Rear
Rear hitch category - 2/3N
Control - Electronic lower-link draft control
Rear linkage capacity at 610 mm behind ball ends, through full lift
range, lbs (kg) - 11390 (5177)
Max lifting capacity at ball ends with arms horizontal, lbs (kg) - 19025
(8647)
Front linkage capacity at 610 mm in front of ball ends, lbs (kg) - 7195
(3270)
Mechanical
Drive Wheels - All Wheel Drive (4x4)
Front Axle (Standard) - 4WD
Front Axle (Optional) - Terraglide front axle with automatic damping
Front Axle (Optional) - SuperSteer front axle
Steering - Hydrostatic
Service brake - Differential hydraulic wet disc
NH TM140 Wheels and Tires
Front tire size - 14.9 R28
Rear tire size - 18.4 R38
Front track width (Min-Max), in (mm) - 61,6-90,0 (1552-2269)
Rear track width (Min-Max), in (mm) - 60,7-88,6 (1530-2232)
New Holland TM 140 Dimensions and Weight
Overall length (4WD), in (mm) - 229,7 (5789)
Overall length (Terraglide front axle), in (mm) - 232,1 (5849)
Overall length (SuperSteer front axle), in (mm) - 235,9 (5946)
Maximum height (4WD), in (mm) - 120,2 (3030)
Wheelbase (4WD), in (mm) - 108,1 (2723)
Wheelbase (Terraglide front axle), in (mm) - 110,4 (2783)
Wheelbase (SuperSteer front axle), in (mm) - 114,3 (2880)
Ground clearance, in (mm) - 15,9 (400)
Turning Angle (4WD/Terraglide), deg - 55
Turning Angle (SuperSteer), deg - 65
Total Weight (Cabine 4WD), lbs (kg) - 11880 (5400)
Maximum ballasted weight (Cabine 4WD), lbs (kg) - 19800 (9000)
________________________________________________________________________________
________________________________________________________________________________________
NH TRACTORS SPECIFICATIONS | ||||
T2220 | T2420 | T4.115 | T4.80 | T4050 |
T5.110 | T5060 | T6.140 | T6050 | T7.185 |
T7.270 | T7050 | T8.350 | TD4040 | TD5050 |
TL90 | TS110 | TS6030 | TT75 | TV6070 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
NH TRACTORS TROUBLESHOOTING | ||||
6640 | G240 | L95 | M135 | T3040 |
T4.110 | T5.105 | T5070 | T6.180 | T6030 |
T7.270 | T7040 | TC29D | TC35 | TD5.85 |
TL100 | TS6.140 | TV140 | TM155 | TN65 |
________________________________________________________________________________________
FORD TRACTORS SPECIFICATIONS | ||||
TL100 | TS6.140 | TV140 | TM155 | TN65 |
640 | 850 | 950 | 1100 | 1210 |
1320 | 1520 | 1620 | 1710 | 1900 |
1910 | 2000 | 2810 | 3000 | 3600 |
3910 | 3930 | 4000 | 4600 | 4610 |
4630 | 5000 | 5030 | 5600 | 5610 |
5640 | 6600 | 6610 | 6640 | 7630 |
7740 | 7840 | 8240 | 8340 | 8770 |
TW-15 | TW-20 | TW-25 | TW-30 | TW-35 |