Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

John Deere 335 Specs

JD 335 Engine Specifications

Make - Kawasaki
Engine Model Number - FH601V
Horsepower - 14.9 kW (20 hp)
Cylinders - V-Twin
Cycle - Four
Speed, Fast Idle - 3450 rpm
Speed, Slow Idle - 1775 rpm
Cooling Type - Air
Oil Filter - Replaceable Full Flow Filter
Air Cleaner - Paper Element with Foam Precleaner
Spark Plug Gap - 0.7 mm (0.028 in.)
Spark Plug Torque - 20 Nm (15 lb-ft)

Electrical System and Battery

Charging System - Flywheel alternator
Ignition - Electronic
Starter - Solenoid-shift
Battery Voltage - 12 volt
CCA - 500 amp
Reserve Capacity - 90 minutes
BCI Group Size - 51

John Deere 335 Drivetrain

Transmission - Tuff Torq K71A
Transaxle - Kanzaki
Number of Speeds - Hydrostatic, Variable Speed
Travel Speeds at Full Engine RPM (Forward) - 0-11.3 km/h (0-7 mph)
Travel Speeds at Full Engine RPM (Reverse) - 0-6.4 km/h (0-4 mph)
Front PTO - independent
Clutch - electric

JD 335 Mechanical

Chassis - 4x2 2WD
Steering - Power
Brakes - Internal Wet Disc
Cab - Open operator station. Adjustable seat with 7-inches of travel

Tires

Front Tires - 16 x 6.50-8
Rear Tires - 23 x 10.50-12
Inflation Front (Maximum) 70 - 97 kPa (10-14 psi)
Inflation Rear (Maximum) 56 - 70 kPa (8-10 psi)

John Deere 335 Capacities

Fuel Tank - 13.2 L (3.5 gal.)
Transmission Oil (With Filter) - 4.3 L (4.7 qt.)
Engine Oil (With Filter) - 1.7 L (1.8 qt.)
Engine Oil (Without Filter) - 1.6 L (1.7 qt.)

JD 335 Dimensions and Weight

Wheel Base - 1217 mm (47.9 in.)
Overall Height - 1107 mm (43.6 in.)
Overall Length - 1835 mm (72.25 in.)
Overall Width Rear Wheels in Narrow Position (Without Mower Deck) - 991 mm (39.0 in).
Overall Width Rear Wheels in Wide Position (Without Mower Deck) - 1054 mm (41.5 in.)
Net Weight (Without Mower Deck or Fuel) - 291 kg (642 lb.)

Attachments

54-Inch Mower

Mower Type - Mulch, Bag or Side Discharge
Cutting Blades - 3
Mower Weight - 61 kg (134 lbs.)
Blade Bolt Torque - 68 Nm (50 lb-ft)
Cutting Width - 137.2 cm (54 in.)
Cutting Height (approximate) - 25 to 102 mm (1 to 4-in.)
Height Adjustment - 13 position, 6.35 mm (1/4 in.) increments

48C Mower

Mower Type - Mulch, Bag or Side Discharge
Cutting Blades - 3
Mower Weight - 53 kg (117 lbs.)
Blade Bolt Torque - 68 Nm (50 lb-ft)
Cutting Width - 121.9 cm (48 in.)
Cutting Height (approximate) - 25 to 102 mm (1 to 4-in.)
Height Adjustment - 13 position, 6.35 mm (1/4 in.) increments

Position Mower Wheels

Pull out spring pin and pin. Remove gage wheel from shipping position and install. Move mower wheels up or down until wheels are approximately 6-13 mm (1/4-1/2 in.) above mowing surface and install pin and spring pin. Adjust all wheels to the same height, or if applicable, adjust rear wheels to roll on the ground: To adjust wheel by 13 mm (1/2 in.) increment, move wheel up or down one hole. Install spring pin and pin to LOCK wheels in position.

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________